Centric 125.42074 Disc Brake Rotor - Front
Centric Premium Front Brake Rotor
The Centric Premium High Carbon Alloy Disc Brake Rotor, part number 125.42074, is built for front brake service on select Infiniti G35 and Nissan 350Z applications. It uses a high-carbon alloy metallurgy to improve heat resistance, reduce brake noise with performance pad compounds, and support consistent stopping performance.
Centric’s Premium High Carbon Alloy rotor line focuses on stable braking under repeated stops and higher-friction pad use. For drivers maintaining a 2003-2005 Nissan 350Z front brake rotor setup or a 2004-2005 Infiniti G35 front rotor replacement, this rotor provides the dimensions and construction needed for a direct-fit service part.
Key Features
- Part number 125.42074
- Front disc brake rotor for select Infiniti G35 and Nissan 350Z models
- High-carbon alloy construction for improved crack resistance during repeated braking
- Helps reduce pad squeal with higher-friction, European-style brake pads
- Vented rotor design with straight vanes for heat management
- Coated hat finish for added corrosion resistance
- 5-lug pattern with 114.3 mm bolt circle and 68 mm center hole
- Outside diameter: 295.7 mm; nominal thickness: 24 mm; discard thickness: 22 mm
Detailed Description
Centric Premium High Carbon Alloy Disc Brake Rotors are engineered with increased carbon, chromium, molybdenum, and chromium content to improve durability and braking consistency. The alloy composition helps resist oxidation and supports better friction characteristics, which is especially relevant for vehicles using performance-oriented pad compounds. This rotor is vented, uses a straight vane design, and features a smooth surface for front brake service on the listed Infiniti and Nissan fitments.
Fits 2004-2005 INFINITI G35, front. Fits 2004 INFINITI G35, front. Fits 2003 INFINITI G35, front. Fits 2003-2005 Nissan 350Z, front. This part cross-references Monroe Shocks & Struts (e.g., 980115P) for the same application.
What It Helps Address
- Brake squeal associated with higher-friction pad compounds
- Rotor cracking during repeated stop-and-go braking
- Brake fade concerns from heat buildup in front braking
- Corrosion on exposed rotor surfaces
- Uneven braking feel from worn front rotors
Installation Notes and Tips
Verify rotor dimensions, hub bore, bolt pattern, and front-position fitment before installation. Clean the hub mounting surface thoroughly to help prevent rotor runout and pedal pulsation. Inspect pads, calipers, and hardware condition at the same time, and bed the pads according to the pad manufacturer’s procedure after installation.
Quality Assurance
Centric’s Premium High Carbon Alloy rotor line uses an upgraded metallurgy aimed at improving thermal stability, noise control, and oxidation resistance in demanding brake service. Part number 125.42074 is built to the listed dimensional specifications for the confirmed front applications.
Original: $92.95
-65%$92.95
$32.53Centric 125.42074 Disc Brake Rotor - Front
Centric Premium Front Brake Rotor
The Centric Premium High Carbon Alloy Disc Brake Rotor, part number 125.42074, is built for front brake service on select Infiniti G35 and Nissan 350Z applications. It uses a high-carbon alloy metallurgy to improve heat resistance, reduce brake noise with performance pad compounds, and support consistent stopping performance.
Centric’s Premium High Carbon Alloy rotor line focuses on stable braking under repeated stops and higher-friction pad use. For drivers maintaining a 2003-2005 Nissan 350Z front brake rotor setup or a 2004-2005 Infiniti G35 front rotor replacement, this rotor provides the dimensions and construction needed for a direct-fit service part.
Key Features
- Part number 125.42074
- Front disc brake rotor for select Infiniti G35 and Nissan 350Z models
- High-carbon alloy construction for improved crack resistance during repeated braking
- Helps reduce pad squeal with higher-friction, European-style brake pads
- Vented rotor design with straight vanes for heat management
- Coated hat finish for added corrosion resistance
- 5-lug pattern with 114.3 mm bolt circle and 68 mm center hole
- Outside diameter: 295.7 mm; nominal thickness: 24 mm; discard thickness: 22 mm
Detailed Description
Centric Premium High Carbon Alloy Disc Brake Rotors are engineered with increased carbon, chromium, molybdenum, and chromium content to improve durability and braking consistency. The alloy composition helps resist oxidation and supports better friction characteristics, which is especially relevant for vehicles using performance-oriented pad compounds. This rotor is vented, uses a straight vane design, and features a smooth surface for front brake service on the listed Infiniti and Nissan fitments.
Fits 2004-2005 INFINITI G35, front. Fits 2004 INFINITI G35, front. Fits 2003 INFINITI G35, front. Fits 2003-2005 Nissan 350Z, front. This part cross-references Monroe Shocks & Struts (e.g., 980115P) for the same application.
What It Helps Address
- Brake squeal associated with higher-friction pad compounds
- Rotor cracking during repeated stop-and-go braking
- Brake fade concerns from heat buildup in front braking
- Corrosion on exposed rotor surfaces
- Uneven braking feel from worn front rotors
Installation Notes and Tips
Verify rotor dimensions, hub bore, bolt pattern, and front-position fitment before installation. Clean the hub mounting surface thoroughly to help prevent rotor runout and pedal pulsation. Inspect pads, calipers, and hardware condition at the same time, and bed the pads according to the pad manufacturer’s procedure after installation.
Quality Assurance
Centric’s Premium High Carbon Alloy rotor line uses an upgraded metallurgy aimed at improving thermal stability, noise control, and oxidation resistance in demanding brake service. Part number 125.42074 is built to the listed dimensional specifications for the confirmed front applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Front Brake Rotor
The Centric Premium High Carbon Alloy Disc Brake Rotor, part number 125.42074, is built for front brake service on select Infiniti G35 and Nissan 350Z applications. It uses a high-carbon alloy metallurgy to improve heat resistance, reduce brake noise with performance pad compounds, and support consistent stopping performance.
Centric’s Premium High Carbon Alloy rotor line focuses on stable braking under repeated stops and higher-friction pad use. For drivers maintaining a 2003-2005 Nissan 350Z front brake rotor setup or a 2004-2005 Infiniti G35 front rotor replacement, this rotor provides the dimensions and construction needed for a direct-fit service part.
Key Features
- Part number 125.42074
- Front disc brake rotor for select Infiniti G35 and Nissan 350Z models
- High-carbon alloy construction for improved crack resistance during repeated braking
- Helps reduce pad squeal with higher-friction, European-style brake pads
- Vented rotor design with straight vanes for heat management
- Coated hat finish for added corrosion resistance
- 5-lug pattern with 114.3 mm bolt circle and 68 mm center hole
- Outside diameter: 295.7 mm; nominal thickness: 24 mm; discard thickness: 22 mm
Detailed Description
Centric Premium High Carbon Alloy Disc Brake Rotors are engineered with increased carbon, chromium, molybdenum, and chromium content to improve durability and braking consistency. The alloy composition helps resist oxidation and supports better friction characteristics, which is especially relevant for vehicles using performance-oriented pad compounds. This rotor is vented, uses a straight vane design, and features a smooth surface for front brake service on the listed Infiniti and Nissan fitments.
Fits 2004-2005 INFINITI G35, front. Fits 2004 INFINITI G35, front. Fits 2003 INFINITI G35, front. Fits 2003-2005 Nissan 350Z, front. This part cross-references Monroe Shocks & Struts (e.g., 980115P) for the same application.
What It Helps Address
- Brake squeal associated with higher-friction pad compounds
- Rotor cracking during repeated stop-and-go braking
- Brake fade concerns from heat buildup in front braking
- Corrosion on exposed rotor surfaces
- Uneven braking feel from worn front rotors
Installation Notes and Tips
Verify rotor dimensions, hub bore, bolt pattern, and front-position fitment before installation. Clean the hub mounting surface thoroughly to help prevent rotor runout and pedal pulsation. Inspect pads, calipers, and hardware condition at the same time, and bed the pads according to the pad manufacturer’s procedure after installation.
Quality Assurance
Centric’s Premium High Carbon Alloy rotor line uses an upgraded metallurgy aimed at improving thermal stability, noise control, and oxidation resistance in demanding brake service. Part number 125.42074 is built to the listed dimensional specifications for the confirmed front applications.
