Centric 141.33673 Disc Brake Caliper - Rear Right
Centric Rear Right Disc Brake Caliper
Centric Premium Semi-Loaded Disc Brake Calipers part number 141.33673 is a remanufactured rear right caliper built for consistent braking performance and dependable fitment. It is finished with a rust-preventative coating, pressure tested, and inspected to support proper operation on the listed Audi and Volkswagen applications.
This Centric Premium Semi-Loaded Disc Brake Calipers line focuses on OE-style brake hydraulics with remanufactured calipers that are cleaned, restored, and verified before release. For drivers searching for a rear right brake caliper for Audi A3, Audi A3 Quattro, Volkswagen e-Golf, Volkswagen Jetta, Audi Q2, Audi TT Quattro, Audi A3 Sportback e-tron, or Volkswagen Golf, part 141.33673 provides a direct replacement option for the specified rear disc brake setup.
- Remanufactured floating disc brake caliper
- Rear right position
- Cast iron caliper body with steel piston
- 38 mm piston diameter
- Rust-preventative gray finish
- Pressure tested and inspected for operation and fitment
- Bleeder screw included
- Mounting bracket included where applicable
- Abutment clips included
- Banjo inlet fitting with M10x1.5 thread
Detailed Product Overview
Centric 141.33673 is a floating rear brake caliper with a single 38 mm piston and cast iron construction. The remanufacturing process includes tumble blasting and an anti-corrosion finish to restore the housing and help resist rust. This caliper is identified for the rear right side and is listed for vehicles such as the 2015-2019 Audi A3, 2015-2019 Audi A3 Quattro, 2015-2020 Volkswagen e-Golf, 2019-2020 Volkswagen Jetta, 2018-2019 Audi Q2, 2016-2019 Audi TT Quattro, 2016-2018 Audi A3 Sportback e-tron, 2017-2018 Volkswagen Golf, and 2020 Audi A3 and Audi A3 Quattro.
This part cross-references Carlson 7010 for the same application.
Common Brake Issues This Part Can Address
- Sticking or seized rear caliper movement
- Uneven rear brake pad wear
- Brake fluid leakage at the caliper body or bleeder area
- Corrosion on the caliper housing and piston area
- Poor rear brake response on the listed Audi and Volkswagen models
Installation Notes and Fitment Tips
- Fits 2020 Audi A3, rear right.
- Fits 2020 Audi A3 Quattro, rear right.
- Fits 2015-2020 Volkswagen e-Golf, rear right.
- Fits 2019-2020 Volkswagen Jetta, rear right.
- Fits 2015-2019 Audi A3, rear right.
- Fits 2015-2019 Audi A3 Quattro, rear right.
- Fits 2018-2019 Audi Q2, rear right.
- Fits 2016-2019 Audi TT Quattro, rear right.
- Fits 2016-2018 Audi A3 Sportback e-tron, rear right.
- Fits 2017-2018 Volkswagen Golf, rear right.
Verify the inlet thread size, bleeder screw size, and bracket requirements against the original caliper before installation. This caliper is listed as a rear right, leading-side application with a banjo inlet and M10 thread specifications, so matching the OE configuration is important for proper brake system service.
Quality Assurance
Centric remanufactures this caliper to a predictable service standard, then pressure tests and inspects it to confirm proper operation and fitment. The rust-preventative finish and included hardware components listed for this application support a clean replacement on the specified Audi and Volkswagen rear brake systems.
Centric 141.33673 Disc Brake Caliper - Rear Right
Centric Rear Right Disc Brake Caliper
Centric Premium Semi-Loaded Disc Brake Calipers part number 141.33673 is a remanufactured rear right caliper built for consistent braking performance and dependable fitment. It is finished with a rust-preventative coating, pressure tested, and inspected to support proper operation on the listed Audi and Volkswagen applications.
This Centric Premium Semi-Loaded Disc Brake Calipers line focuses on OE-style brake hydraulics with remanufactured calipers that are cleaned, restored, and verified before release. For drivers searching for a rear right brake caliper for Audi A3, Audi A3 Quattro, Volkswagen e-Golf, Volkswagen Jetta, Audi Q2, Audi TT Quattro, Audi A3 Sportback e-tron, or Volkswagen Golf, part 141.33673 provides a direct replacement option for the specified rear disc brake setup.
- Remanufactured floating disc brake caliper
- Rear right position
- Cast iron caliper body with steel piston
- 38 mm piston diameter
- Rust-preventative gray finish
- Pressure tested and inspected for operation and fitment
- Bleeder screw included
- Mounting bracket included where applicable
- Abutment clips included
- Banjo inlet fitting with M10x1.5 thread
Detailed Product Overview
Centric 141.33673 is a floating rear brake caliper with a single 38 mm piston and cast iron construction. The remanufacturing process includes tumble blasting and an anti-corrosion finish to restore the housing and help resist rust. This caliper is identified for the rear right side and is listed for vehicles such as the 2015-2019 Audi A3, 2015-2019 Audi A3 Quattro, 2015-2020 Volkswagen e-Golf, 2019-2020 Volkswagen Jetta, 2018-2019 Audi Q2, 2016-2019 Audi TT Quattro, 2016-2018 Audi A3 Sportback e-tron, 2017-2018 Volkswagen Golf, and 2020 Audi A3 and Audi A3 Quattro.
This part cross-references Carlson 7010 for the same application.
Common Brake Issues This Part Can Address
- Sticking or seized rear caliper movement
- Uneven rear brake pad wear
- Brake fluid leakage at the caliper body or bleeder area
- Corrosion on the caliper housing and piston area
- Poor rear brake response on the listed Audi and Volkswagen models
Installation Notes and Fitment Tips
- Fits 2020 Audi A3, rear right.
- Fits 2020 Audi A3 Quattro, rear right.
- Fits 2015-2020 Volkswagen e-Golf, rear right.
- Fits 2019-2020 Volkswagen Jetta, rear right.
- Fits 2015-2019 Audi A3, rear right.
- Fits 2015-2019 Audi A3 Quattro, rear right.
- Fits 2018-2019 Audi Q2, rear right.
- Fits 2016-2019 Audi TT Quattro, rear right.
- Fits 2016-2018 Audi A3 Sportback e-tron, rear right.
- Fits 2017-2018 Volkswagen Golf, rear right.
Verify the inlet thread size, bleeder screw size, and bracket requirements against the original caliper before installation. This caliper is listed as a rear right, leading-side application with a banjo inlet and M10 thread specifications, so matching the OE configuration is important for proper brake system service.
Quality Assurance
Centric remanufactures this caliper to a predictable service standard, then pressure tests and inspects it to confirm proper operation and fitment. The rust-preventative finish and included hardware components listed for this application support a clean replacement on the specified Audi and Volkswagen rear brake systems.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Rear Right Disc Brake Caliper
Centric Premium Semi-Loaded Disc Brake Calipers part number 141.33673 is a remanufactured rear right caliper built for consistent braking performance and dependable fitment. It is finished with a rust-preventative coating, pressure tested, and inspected to support proper operation on the listed Audi and Volkswagen applications.
This Centric Premium Semi-Loaded Disc Brake Calipers line focuses on OE-style brake hydraulics with remanufactured calipers that are cleaned, restored, and verified before release. For drivers searching for a rear right brake caliper for Audi A3, Audi A3 Quattro, Volkswagen e-Golf, Volkswagen Jetta, Audi Q2, Audi TT Quattro, Audi A3 Sportback e-tron, or Volkswagen Golf, part 141.33673 provides a direct replacement option for the specified rear disc brake setup.
- Remanufactured floating disc brake caliper
- Rear right position
- Cast iron caliper body with steel piston
- 38 mm piston diameter
- Rust-preventative gray finish
- Pressure tested and inspected for operation and fitment
- Bleeder screw included
- Mounting bracket included where applicable
- Abutment clips included
- Banjo inlet fitting with M10x1.5 thread
Detailed Product Overview
Centric 141.33673 is a floating rear brake caliper with a single 38 mm piston and cast iron construction. The remanufacturing process includes tumble blasting and an anti-corrosion finish to restore the housing and help resist rust. This caliper is identified for the rear right side and is listed for vehicles such as the 2015-2019 Audi A3, 2015-2019 Audi A3 Quattro, 2015-2020 Volkswagen e-Golf, 2019-2020 Volkswagen Jetta, 2018-2019 Audi Q2, 2016-2019 Audi TT Quattro, 2016-2018 Audi A3 Sportback e-tron, 2017-2018 Volkswagen Golf, and 2020 Audi A3 and Audi A3 Quattro.
This part cross-references Carlson 7010 for the same application.
Common Brake Issues This Part Can Address
- Sticking or seized rear caliper movement
- Uneven rear brake pad wear
- Brake fluid leakage at the caliper body or bleeder area
- Corrosion on the caliper housing and piston area
- Poor rear brake response on the listed Audi and Volkswagen models
Installation Notes and Fitment Tips
- Fits 2020 Audi A3, rear right.
- Fits 2020 Audi A3 Quattro, rear right.
- Fits 2015-2020 Volkswagen e-Golf, rear right.
- Fits 2019-2020 Volkswagen Jetta, rear right.
- Fits 2015-2019 Audi A3, rear right.
- Fits 2015-2019 Audi A3 Quattro, rear right.
- Fits 2018-2019 Audi Q2, rear right.
- Fits 2016-2019 Audi TT Quattro, rear right.
- Fits 2016-2018 Audi A3 Sportback e-tron, rear right.
- Fits 2017-2018 Volkswagen Golf, rear right.
Verify the inlet thread size, bleeder screw size, and bracket requirements against the original caliper before installation. This caliper is listed as a rear right, leading-side application with a banjo inlet and M10 thread specifications, so matching the OE configuration is important for proper brake system service.
Quality Assurance
Centric remanufactures this caliper to a predictable service standard, then pressure tests and inspects it to confirm proper operation and fitment. The rust-preventative finish and included hardware components listed for this application support a clean replacement on the specified Audi and Volkswagen rear brake systems.
