Centric 150.65335 Brake Hydraulic Hose - Rear Left
Centric Brake Hydraulic Hose for Windstar
The Centric Premium Brake Hydraulic Hose, part number 150.65335, is a DOT approved replacement brake hose for rear left applications on the 1995-2003 Ford Windstar. It is built with a black EPDM rubber outer sleeve and metal end fittings for dependable brake fluid transfer in a direct-fit service application.
Centric’s brake hydraulic hose program covers master cylinders, wheel cylinders, brake hoses, repair kits, and remanufactured power boosters, giving technicians a focused source for brake hydraulic service parts. This Centric 150.65335 hose is a practical OE-style replacement for Windstar rear brake repairs.
Key Features
- DOT approved brake hydraulic hose
- Fits 1995-2003 Ford Windstar, rear left
- Black EPDM rubber outer sleeve
- Metal banjo end 1 fitting and metal female end 2 fitting
- End 2 bubble flare with M10-1.00 thread size
- Gasket or seal included
- Banjo bolt and washer references available for service matching
- Centric Premium Brake Hydraulic Hoses line
Detailed Description
Use this brake hydraulic hose when servicing the rear left brake line on a Ford Windstar from 1995 through 2003. The hose measures 20.945 inches overall and uses an EPDM rubber outer sleeve with metal fittings to route brake fluid between the chassis hard line and the brake assembly. The Centric 150.65335 is a direct replacement style part for vehicles that require a banjo connection on one end and a female bubble flare connection on the other.
This part cross-references Dorman - First Stop H380531 and Raybestos Brakes BH380531 for the same application. It also aligns with common Windstar brake hose service needs where the original hose shows age-related wear, cracking, or fluid seepage.
What This Part Helps Address
- Brake fluid leakage at the hose connection
- Cracked or deteriorated rubber brake hose material
- Soft or inconsistent brake pedal feel caused by hose restriction
- Corrosion or wear at the original hose fittings
- Rear left brake service on a 1995-2003 Ford Windstar
Installation Notes and Tips
Confirm rear left fitment before ordering: Fits 1995-2003 Ford Windstar, rear left. Match the banjo and female bubble flare end styles, along with the M10-1.00 thread specification, to the original hose. The listing notes one plastic sleeve and three plastic wire clips, while mounting hardware, grommets, brackets, and shields are not included. Replace sealing washers and verify all connections are clean and properly torqued during installation.
Quality Assurance
This Centric brake hydraulic hose is DOT approved and part of Centric Parts’ brake hydraulic program, which covers core brake hydraulic service components for repair and replacement work.
Centric 150.65335 Brake Hydraulic Hose - Rear Left
Centric Brake Hydraulic Hose for Windstar
The Centric Premium Brake Hydraulic Hose, part number 150.65335, is a DOT approved replacement brake hose for rear left applications on the 1995-2003 Ford Windstar. It is built with a black EPDM rubber outer sleeve and metal end fittings for dependable brake fluid transfer in a direct-fit service application.
Centric’s brake hydraulic hose program covers master cylinders, wheel cylinders, brake hoses, repair kits, and remanufactured power boosters, giving technicians a focused source for brake hydraulic service parts. This Centric 150.65335 hose is a practical OE-style replacement for Windstar rear brake repairs.
Key Features
- DOT approved brake hydraulic hose
- Fits 1995-2003 Ford Windstar, rear left
- Black EPDM rubber outer sleeve
- Metal banjo end 1 fitting and metal female end 2 fitting
- End 2 bubble flare with M10-1.00 thread size
- Gasket or seal included
- Banjo bolt and washer references available for service matching
- Centric Premium Brake Hydraulic Hoses line
Detailed Description
Use this brake hydraulic hose when servicing the rear left brake line on a Ford Windstar from 1995 through 2003. The hose measures 20.945 inches overall and uses an EPDM rubber outer sleeve with metal fittings to route brake fluid between the chassis hard line and the brake assembly. The Centric 150.65335 is a direct replacement style part for vehicles that require a banjo connection on one end and a female bubble flare connection on the other.
This part cross-references Dorman - First Stop H380531 and Raybestos Brakes BH380531 for the same application. It also aligns with common Windstar brake hose service needs where the original hose shows age-related wear, cracking, or fluid seepage.
What This Part Helps Address
- Brake fluid leakage at the hose connection
- Cracked or deteriorated rubber brake hose material
- Soft or inconsistent brake pedal feel caused by hose restriction
- Corrosion or wear at the original hose fittings
- Rear left brake service on a 1995-2003 Ford Windstar
Installation Notes and Tips
Confirm rear left fitment before ordering: Fits 1995-2003 Ford Windstar, rear left. Match the banjo and female bubble flare end styles, along with the M10-1.00 thread specification, to the original hose. The listing notes one plastic sleeve and three plastic wire clips, while mounting hardware, grommets, brackets, and shields are not included. Replace sealing washers and verify all connections are clean and properly torqued during installation.
Quality Assurance
This Centric brake hydraulic hose is DOT approved and part of Centric Parts’ brake hydraulic program, which covers core brake hydraulic service components for repair and replacement work.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Brake Hydraulic Hose for Windstar
The Centric Premium Brake Hydraulic Hose, part number 150.65335, is a DOT approved replacement brake hose for rear left applications on the 1995-2003 Ford Windstar. It is built with a black EPDM rubber outer sleeve and metal end fittings for dependable brake fluid transfer in a direct-fit service application.
Centric’s brake hydraulic hose program covers master cylinders, wheel cylinders, brake hoses, repair kits, and remanufactured power boosters, giving technicians a focused source for brake hydraulic service parts. This Centric 150.65335 hose is a practical OE-style replacement for Windstar rear brake repairs.
Key Features
- DOT approved brake hydraulic hose
- Fits 1995-2003 Ford Windstar, rear left
- Black EPDM rubber outer sleeve
- Metal banjo end 1 fitting and metal female end 2 fitting
- End 2 bubble flare with M10-1.00 thread size
- Gasket or seal included
- Banjo bolt and washer references available for service matching
- Centric Premium Brake Hydraulic Hoses line
Detailed Description
Use this brake hydraulic hose when servicing the rear left brake line on a Ford Windstar from 1995 through 2003. The hose measures 20.945 inches overall and uses an EPDM rubber outer sleeve with metal fittings to route brake fluid between the chassis hard line and the brake assembly. The Centric 150.65335 is a direct replacement style part for vehicles that require a banjo connection on one end and a female bubble flare connection on the other.
This part cross-references Dorman - First Stop H380531 and Raybestos Brakes BH380531 for the same application. It also aligns with common Windstar brake hose service needs where the original hose shows age-related wear, cracking, or fluid seepage.
What This Part Helps Address
- Brake fluid leakage at the hose connection
- Cracked or deteriorated rubber brake hose material
- Soft or inconsistent brake pedal feel caused by hose restriction
- Corrosion or wear at the original hose fittings
- Rear left brake service on a 1995-2003 Ford Windstar
Installation Notes and Tips
Confirm rear left fitment before ordering: Fits 1995-2003 Ford Windstar, rear left. Match the banjo and female bubble flare end styles, along with the M10-1.00 thread specification, to the original hose. The listing notes one plastic sleeve and three plastic wire clips, while mounting hardware, grommets, brackets, and shields are not included. Replace sealing washers and verify all connections are clean and properly torqued during installation.
Quality Assurance
This Centric brake hydraulic hose is DOT approved and part of Centric Parts’ brake hydraulic program, which covers core brake hydraulic service components for repair and replacement work.
