Centric 300.07770 Disc Brake Pad Set - Front or Rear
Centric Premium Semi-Metallic Brake Pads
Centric Premium Semi-Metallic Disc Brake Pad Sets are built for passenger cars and light duty trucks that need consistent braking response and low-noise operation. Part number 300.07770 uses a semi-metallic friction formula with O.E.-style gas slots and chamfers to support stable stopping in repeated stop-and-go driving.
Centric Premium Semi-Metallic Disc Brake Pad Sets are a practical choice for drivers searching for Centric brake pads 300.07770, Centric Premium Semi-Metallic Disc Brake Pad Sets, and replacement disc brake pads for passenger car and light truck brake service.
Key Features
- Semi-metallic friction material for dependable braking performance
- High-performance shims attached to help reduce brake noise
- O.E.-style gas slots and chamfers for improved pad behavior in repeat stop situations
- Installation-ready design with mounting hardware and pad shims included
- Integrally molded friction material attachment for consistent pad construction
- Prepared for vehicles that do not use a pad wear sensor
- Outer and inner pad dimensions: 64.5 mm height, 222 mm width, 20 mm thickness
Product Details
Centric engineered this Premium Semi-Metallic Disc Brake Pad Set to deliver reliable stopping power with reduced brake noise and stable pedal feel. The semi-metallic compound is suited to everyday driving where repeat braking, heat management, and predictable response matter. Part number 300.07770 is also referenced by cross numbers 7644D777 and D777 for the same application.
For shoppers comparing brake pads for Honda Civic or similar passenger-car brake service, this Centric Premium Semi-Metallic set provides a direct replacement option with OE-style shaping and hardware support. Search terms such as Honda Civic brake pads, front brake pad replacement, and Centric 300.07770 brake pads are commonly used for this type of part.
Common Problems It Can Address
- Squealing or noisy braking from worn pads
- Reduced stopping performance from thin or heat-soaked pads
- Uneven brake feel during repeated stops
- Brake dust buildup associated with worn friction material
- Need for a direct replacement disc brake pad set during routine brake service
Installation Notes
Verify pad shape, dimensions, and vehicle application before installation. Inspect rotors, calipers, and guide hardware for wear or damage, and replace any worn components as needed. Clean the brake assembly thoroughly, follow the vehicle manufacturer’s service procedure, and bed the pads in according to standard brake-in practice after installation.
Quality Assurance
Centric Premium brake pads are developed with application-specific friction compounds and OE-style design features to support consistent braking performance and noise control. This part number is built for passenger cars and light duty trucks and is backed by Centric Parts product engineering standards.
Original: $46.17
-65%$46.17
$16.16Centric 300.07770 Disc Brake Pad Set - Front or Rear
Centric Premium Semi-Metallic Brake Pads
Centric Premium Semi-Metallic Disc Brake Pad Sets are built for passenger cars and light duty trucks that need consistent braking response and low-noise operation. Part number 300.07770 uses a semi-metallic friction formula with O.E.-style gas slots and chamfers to support stable stopping in repeated stop-and-go driving.
Centric Premium Semi-Metallic Disc Brake Pad Sets are a practical choice for drivers searching for Centric brake pads 300.07770, Centric Premium Semi-Metallic Disc Brake Pad Sets, and replacement disc brake pads for passenger car and light truck brake service.
Key Features
- Semi-metallic friction material for dependable braking performance
- High-performance shims attached to help reduce brake noise
- O.E.-style gas slots and chamfers for improved pad behavior in repeat stop situations
- Installation-ready design with mounting hardware and pad shims included
- Integrally molded friction material attachment for consistent pad construction
- Prepared for vehicles that do not use a pad wear sensor
- Outer and inner pad dimensions: 64.5 mm height, 222 mm width, 20 mm thickness
Product Details
Centric engineered this Premium Semi-Metallic Disc Brake Pad Set to deliver reliable stopping power with reduced brake noise and stable pedal feel. The semi-metallic compound is suited to everyday driving where repeat braking, heat management, and predictable response matter. Part number 300.07770 is also referenced by cross numbers 7644D777 and D777 for the same application.
For shoppers comparing brake pads for Honda Civic or similar passenger-car brake service, this Centric Premium Semi-Metallic set provides a direct replacement option with OE-style shaping and hardware support. Search terms such as Honda Civic brake pads, front brake pad replacement, and Centric 300.07770 brake pads are commonly used for this type of part.
Common Problems It Can Address
- Squealing or noisy braking from worn pads
- Reduced stopping performance from thin or heat-soaked pads
- Uneven brake feel during repeated stops
- Brake dust buildup associated with worn friction material
- Need for a direct replacement disc brake pad set during routine brake service
Installation Notes
Verify pad shape, dimensions, and vehicle application before installation. Inspect rotors, calipers, and guide hardware for wear or damage, and replace any worn components as needed. Clean the brake assembly thoroughly, follow the vehicle manufacturer’s service procedure, and bed the pads in according to standard brake-in practice after installation.
Quality Assurance
Centric Premium brake pads are developed with application-specific friction compounds and OE-style design features to support consistent braking performance and noise control. This part number is built for passenger cars and light duty trucks and is backed by Centric Parts product engineering standards.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Semi-Metallic Brake Pads
Centric Premium Semi-Metallic Disc Brake Pad Sets are built for passenger cars and light duty trucks that need consistent braking response and low-noise operation. Part number 300.07770 uses a semi-metallic friction formula with O.E.-style gas slots and chamfers to support stable stopping in repeated stop-and-go driving.
Centric Premium Semi-Metallic Disc Brake Pad Sets are a practical choice for drivers searching for Centric brake pads 300.07770, Centric Premium Semi-Metallic Disc Brake Pad Sets, and replacement disc brake pads for passenger car and light truck brake service.
Key Features
- Semi-metallic friction material for dependable braking performance
- High-performance shims attached to help reduce brake noise
- O.E.-style gas slots and chamfers for improved pad behavior in repeat stop situations
- Installation-ready design with mounting hardware and pad shims included
- Integrally molded friction material attachment for consistent pad construction
- Prepared for vehicles that do not use a pad wear sensor
- Outer and inner pad dimensions: 64.5 mm height, 222 mm width, 20 mm thickness
Product Details
Centric engineered this Premium Semi-Metallic Disc Brake Pad Set to deliver reliable stopping power with reduced brake noise and stable pedal feel. The semi-metallic compound is suited to everyday driving where repeat braking, heat management, and predictable response matter. Part number 300.07770 is also referenced by cross numbers 7644D777 and D777 for the same application.
For shoppers comparing brake pads for Honda Civic or similar passenger-car brake service, this Centric Premium Semi-Metallic set provides a direct replacement option with OE-style shaping and hardware support. Search terms such as Honda Civic brake pads, front brake pad replacement, and Centric 300.07770 brake pads are commonly used for this type of part.
Common Problems It Can Address
- Squealing or noisy braking from worn pads
- Reduced stopping performance from thin or heat-soaked pads
- Uneven brake feel during repeated stops
- Brake dust buildup associated with worn friction material
- Need for a direct replacement disc brake pad set during routine brake service
Installation Notes
Verify pad shape, dimensions, and vehicle application before installation. Inspect rotors, calipers, and guide hardware for wear or damage, and replace any worn components as needed. Clean the brake assembly thoroughly, follow the vehicle manufacturer’s service procedure, and bed the pads in according to standard brake-in practice after installation.
Quality Assurance
Centric Premium brake pads are developed with application-specific friction compounds and OE-style design features to support consistent braking performance and noise control. This part number is built for passenger cars and light duty trucks and is backed by Centric Parts product engineering standards.
