Centric 300.08270 Disc Brake Pad Set - Front
Centric Premium Semi-Metallic Brake Pads
Centric Premium Semi-Metallic Disc Brake Pad Set, part number 300.08270, is built for passenger cars and light duty trucks that need consistent braking response and dependable pedal feel. The semi-metallic friction material is paired with O.E.-style gas slots and chamfers to support stable braking in repeated stop-and-go use.
Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270 is a direct-fit brake pad solution for drivers looking for a service-ready replacement with shims already attached and mounting hardware included. It is a practical choice for brake service on vehicles such as Honda Civic applications where controlled stopping performance and reduced brake noise matter.
Key Features
- Semi-metallic friction material for dependable stopping performance
- High-performance shims included for noise control
- O.E.-style gas slots and chamfers for repeat-stop braking stability
- Integrally molded friction material attachment
- Mounting hardware included
- Prepared for vehicles without a pad wear sensor
- Fits applications using the Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270
Product Details
Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270 is engineered with application-specific friction tuning to balance stopping power and braking refinement. The pad design uses a semi-metallic compound, 19.8 mm outer pad friction material thickness, and matching inner and outer pad dimensions for consistent contact across the rotor surface. The attached shims and chamfered, slotted pad profile help manage noise and heat during frequent braking. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Squealing or brake noise during normal stops
- Reduced braking consistency in repeated stop situations
- Worn pad material requiring replacement
- Uneven pedal feel caused by aged brake pads
- Brake service needs on Honda Civic and similar passenger-car applications
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and pad contact points, then verify proper pad movement after assembly. Because this set is prepared for applications without a pad wear sensor, confirm the vehicle’s brake warning setup before ordering. For fitment-specific service, use the vehicle catalog to confirm the exact year, make, model, and brake position before installing part number 300.08270.
Quality Assurance
Centric Parts develops premium brake pad compounds for passenger cars and light duty trucks with an emphasis on stopping performance, noise control, and repeat-stop braking stability. The Premium Semi-Metallic Disc Brake Pad Set 300.08270 reflects that application-focused approach for service replacement use.
Centric 300.08270 Disc Brake Pad Set - Front
Centric Premium Semi-Metallic Brake Pads
Centric Premium Semi-Metallic Disc Brake Pad Set, part number 300.08270, is built for passenger cars and light duty trucks that need consistent braking response and dependable pedal feel. The semi-metallic friction material is paired with O.E.-style gas slots and chamfers to support stable braking in repeated stop-and-go use.
Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270 is a direct-fit brake pad solution for drivers looking for a service-ready replacement with shims already attached and mounting hardware included. It is a practical choice for brake service on vehicles such as Honda Civic applications where controlled stopping performance and reduced brake noise matter.
Key Features
- Semi-metallic friction material for dependable stopping performance
- High-performance shims included for noise control
- O.E.-style gas slots and chamfers for repeat-stop braking stability
- Integrally molded friction material attachment
- Mounting hardware included
- Prepared for vehicles without a pad wear sensor
- Fits applications using the Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270
Product Details
Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270 is engineered with application-specific friction tuning to balance stopping power and braking refinement. The pad design uses a semi-metallic compound, 19.8 mm outer pad friction material thickness, and matching inner and outer pad dimensions for consistent contact across the rotor surface. The attached shims and chamfered, slotted pad profile help manage noise and heat during frequent braking. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Squealing or brake noise during normal stops
- Reduced braking consistency in repeated stop situations
- Worn pad material requiring replacement
- Uneven pedal feel caused by aged brake pads
- Brake service needs on Honda Civic and similar passenger-car applications
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and pad contact points, then verify proper pad movement after assembly. Because this set is prepared for applications without a pad wear sensor, confirm the vehicle’s brake warning setup before ordering. For fitment-specific service, use the vehicle catalog to confirm the exact year, make, model, and brake position before installing part number 300.08270.
Quality Assurance
Centric Parts develops premium brake pad compounds for passenger cars and light duty trucks with an emphasis on stopping performance, noise control, and repeat-stop braking stability. The Premium Semi-Metallic Disc Brake Pad Set 300.08270 reflects that application-focused approach for service replacement use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Premium Semi-Metallic Brake Pads
Centric Premium Semi-Metallic Disc Brake Pad Set, part number 300.08270, is built for passenger cars and light duty trucks that need consistent braking response and dependable pedal feel. The semi-metallic friction material is paired with O.E.-style gas slots and chamfers to support stable braking in repeated stop-and-go use.
Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270 is a direct-fit brake pad solution for drivers looking for a service-ready replacement with shims already attached and mounting hardware included. It is a practical choice for brake service on vehicles such as Honda Civic applications where controlled stopping performance and reduced brake noise matter.
Key Features
- Semi-metallic friction material for dependable stopping performance
- High-performance shims included for noise control
- O.E.-style gas slots and chamfers for repeat-stop braking stability
- Integrally molded friction material attachment
- Mounting hardware included
- Prepared for vehicles without a pad wear sensor
- Fits applications using the Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270
Product Details
Centric Premium Semi-Metallic Disc Brake Pad Set 300.08270 is engineered with application-specific friction tuning to balance stopping power and braking refinement. The pad design uses a semi-metallic compound, 19.8 mm outer pad friction material thickness, and matching inner and outer pad dimensions for consistent contact across the rotor surface. The attached shims and chamfered, slotted pad profile help manage noise and heat during frequent braking. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Squealing or brake noise during normal stops
- Reduced braking consistency in repeated stop situations
- Worn pad material requiring replacement
- Uneven pedal feel caused by aged brake pads
- Brake service needs on Honda Civic and similar passenger-car applications
Installation Notes and Tips
Inspect rotors, calipers, and slide hardware before installation. Clean the caliper bracket and pad contact points, then verify proper pad movement after assembly. Because this set is prepared for applications without a pad wear sensor, confirm the vehicle’s brake warning setup before ordering. For fitment-specific service, use the vehicle catalog to confirm the exact year, make, model, and brake position before installing part number 300.08270.
Quality Assurance
Centric Parts develops premium brake pad compounds for passenger cars and light duty trucks with an emphasis on stopping performance, noise control, and repeat-stop braking stability. The Premium Semi-Metallic Disc Brake Pad Set 300.08270 reflects that application-focused approach for service replacement use.
