Centric 300.15090 Disc Brake Pad Set - Front
Front Brake Pads for Nissan Armada and Titan
Centric Premium Semi-Metallic Disc Brake Pad Set 300.15090 is built for front brake service on select INFINITI and Nissan trucks and SUVs. It combines semi-metallic friction material with OE-style shaping to support consistent stopping performance, reduced brake noise, and stable braking in repeated stop-and-go use.
Compatible With 2011-2024 INFINITI QX56/QX80, 2011-2024 Nissan Armada, and 2011-2024 Nissan Titan front brake applications. This part number, 300.15090, is a direct-fit option for drivers looking for a front disc brake pad set for these platforms.
Key Features
- Semi-metallic friction material for dependable braking response
- High-performance shims attached for noise control
- OE-style gas slots and chamfers to support even pad contact
- Prepared for pad wear sensor use
- Pad wear sensor included
- Mounting hardware included
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 62.7 mm height, 169.9 mm width, 17.9 mm thickness
Product Details
Centric Premium Semi-Metallic Disc Brake Pad Sets are part of the Centric Premium Brake Pads line, which focuses on application-specific friction compounds for passenger cars and light-duty trucks. For this front brake pad set, Centric uses a semi-metallic compound paired with shims and OE-style slot and chamfer geometry to help maintain braking consistency and reduce noise during repeated stops. The 300.15090 brake pads are a practical choice for Nissan Armada front brake pad replacement, Nissan Titan front brake pad replacement, and INFINITI QX80 front brake service where fitment matches the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Squealing or brake noise during normal stopping
- Reduced braking response from worn front pads
- Uneven pad wear on front disc brake service
- Brake fade or inconsistent feel in repeated stop situations
- Wear sensor service needs on supported applications
Installation Notes and Tips
Verify front axle fitment by year, make, model, and brake configuration before installation. Inspect rotors, calipers, and pad hardware surfaces for wear or damage, and clean all contact points before fitting the new pads. Because this set is prepared for pad wear sensor use and includes a wear sensor, confirm the sensor routing and connector style match the vehicle before reassembly. Follow the vehicle manufacturer’s brake service procedure and bed-in process after installation.
Quality Assurance
Centric Parts engineers developed the Premium Brake Pads line with application-specific friction compounds to improve stopping performance and reduce noise under braking. The pad set uses OE-style gas slots and chamfers, along with attached shims, to support consistent front brake operation on the listed INFINITI and Nissan applications.
Centric 300.15090 Disc Brake Pad Set - Front
Front Brake Pads for Nissan Armada and Titan
Centric Premium Semi-Metallic Disc Brake Pad Set 300.15090 is built for front brake service on select INFINITI and Nissan trucks and SUVs. It combines semi-metallic friction material with OE-style shaping to support consistent stopping performance, reduced brake noise, and stable braking in repeated stop-and-go use.
Compatible With 2011-2024 INFINITI QX56/QX80, 2011-2024 Nissan Armada, and 2011-2024 Nissan Titan front brake applications. This part number, 300.15090, is a direct-fit option for drivers looking for a front disc brake pad set for these platforms.
Key Features
- Semi-metallic friction material for dependable braking response
- High-performance shims attached for noise control
- OE-style gas slots and chamfers to support even pad contact
- Prepared for pad wear sensor use
- Pad wear sensor included
- Mounting hardware included
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 62.7 mm height, 169.9 mm width, 17.9 mm thickness
Product Details
Centric Premium Semi-Metallic Disc Brake Pad Sets are part of the Centric Premium Brake Pads line, which focuses on application-specific friction compounds for passenger cars and light-duty trucks. For this front brake pad set, Centric uses a semi-metallic compound paired with shims and OE-style slot and chamfer geometry to help maintain braking consistency and reduce noise during repeated stops. The 300.15090 brake pads are a practical choice for Nissan Armada front brake pad replacement, Nissan Titan front brake pad replacement, and INFINITI QX80 front brake service where fitment matches the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Squealing or brake noise during normal stopping
- Reduced braking response from worn front pads
- Uneven pad wear on front disc brake service
- Brake fade or inconsistent feel in repeated stop situations
- Wear sensor service needs on supported applications
Installation Notes and Tips
Verify front axle fitment by year, make, model, and brake configuration before installation. Inspect rotors, calipers, and pad hardware surfaces for wear or damage, and clean all contact points before fitting the new pads. Because this set is prepared for pad wear sensor use and includes a wear sensor, confirm the sensor routing and connector style match the vehicle before reassembly. Follow the vehicle manufacturer’s brake service procedure and bed-in process after installation.
Quality Assurance
Centric Parts engineers developed the Premium Brake Pads line with application-specific friction compounds to improve stopping performance and reduce noise under braking. The pad set uses OE-style gas slots and chamfers, along with attached shims, to support consistent front brake operation on the listed INFINITI and Nissan applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Brake Pads for Nissan Armada and Titan
Centric Premium Semi-Metallic Disc Brake Pad Set 300.15090 is built for front brake service on select INFINITI and Nissan trucks and SUVs. It combines semi-metallic friction material with OE-style shaping to support consistent stopping performance, reduced brake noise, and stable braking in repeated stop-and-go use.
Compatible With 2011-2024 INFINITI QX56/QX80, 2011-2024 Nissan Armada, and 2011-2024 Nissan Titan front brake applications. This part number, 300.15090, is a direct-fit option for drivers looking for a front disc brake pad set for these platforms.
Key Features
- Semi-metallic friction material for dependable braking response
- High-performance shims attached for noise control
- OE-style gas slots and chamfers to support even pad contact
- Prepared for pad wear sensor use
- Pad wear sensor included
- Mounting hardware included
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 62.7 mm height, 169.9 mm width, 17.9 mm thickness
Product Details
Centric Premium Semi-Metallic Disc Brake Pad Sets are part of the Centric Premium Brake Pads line, which focuses on application-specific friction compounds for passenger cars and light-duty trucks. For this front brake pad set, Centric uses a semi-metallic compound paired with shims and OE-style slot and chamfer geometry to help maintain braking consistency and reduce noise during repeated stops. The 300.15090 brake pads are a practical choice for Nissan Armada front brake pad replacement, Nissan Titan front brake pad replacement, and INFINITI QX80 front brake service where fitment matches the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Squealing or brake noise during normal stopping
- Reduced braking response from worn front pads
- Uneven pad wear on front disc brake service
- Brake fade or inconsistent feel in repeated stop situations
- Wear sensor service needs on supported applications
Installation Notes and Tips
Verify front axle fitment by year, make, model, and brake configuration before installation. Inspect rotors, calipers, and pad hardware surfaces for wear or damage, and clean all contact points before fitting the new pads. Because this set is prepared for pad wear sensor use and includes a wear sensor, confirm the sensor routing and connector style match the vehicle before reassembly. Follow the vehicle manufacturer’s brake service procedure and bed-in process after installation.
Quality Assurance
Centric Parts engineers developed the Premium Brake Pads line with application-specific friction compounds to improve stopping performance and reduce noise under braking. The pad set uses OE-style gas slots and chamfers, along with attached shims, to support consistent front brake operation on the listed INFINITI and Nissan applications.
