Centric 320.22023H Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor for Range Rover Evoque
Centric GCX Elemental Protection Disc Brake Rotor 320.22023H is a rear replacement rotor for the 2012-2015 Land Rover Range Rover Evoque. It is built with a fully coated finish and high carbon content metallurgy to match OE-style braking performance while helping resist rust on exposed surfaces.
The GCX line is engineered around application-specific coating patterns and rotor metallurgy. For the Range Rover Evoque, that means a rear disc brake rotor with a smooth surface, coated hat, and corrosion protection on non-mating areas for cleaner appearance and longer service life.
Key Features
- Part number 320.22023H
- Fits 2012-2015 Land Rover Range Rover Evoque, rear
- Fully coated disc finish with coated hat
- High carbon content rotor metallurgy
- Solid rotor design with smooth surface type
- Outside diameter: 11.890 in. / 302.0 mm
- Nominal thickness: 0.433 in. / 11.0 mm
- Discard thickness: 0.354 in. / 9.0 mm
- 5-lug pattern with 108.0 mm bolt circle
- Floating disc mounting and 1 miscellaneous hole
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built to align with OE performance targets while adding corrosion protection on non-mating surfaces. The GCX platform uses application-specific coating patterns and metallurgy choices to better match the brake pad friction profile and the vehicle’s original rotor specification. For Range Rover Evoque rear brake service, this rotor provides the dimensions and construction needed for a direct replacement on the listed applications.
Part number 320.22023H is a practical choice for drivers servicing rear brake rotors on a 2012-2015 Land Rover Range Rover Evoque. If you are searching for a rear brake rotor for Land Rover Range Rover Evoque 2012-2015, or a Centric GCX rear rotor 320.22023H, this listing matches the confirmed fitment shown here.
What This Rotor Helps Address
- Rear rotor rust on exposed surfaces
- Brake pulsation caused by worn or below-spec rotors
- Reduced braking consistency from rotor wear
- Cosmetic corrosion on the hat and non-mating areas
- OE replacement needs for rear brake service on the Range Rover Evoque
Installation Notes and Tips
Verify rotor dimensions, hub fit, and brake pad condition before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect caliper hardware, slides, and pads for wear before completing the brake job. This rotor is listed for rear position only on the confirmed Range Rover Evoque applications.
Quality Assurance
Centric designs the GCX rotor line to match OE performance expectations and uses advanced RS200 coating on non-mating surfaces for added rust and corrosion protection. The high carbon alloy formulation is selected to align with the vehicle’s OEM metallurgical profile for the listed application. Part number 320.22023H is covered by Centric’s product engineering standards for the GCX line.
Centric 320.22023H Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor for Range Rover Evoque
Centric GCX Elemental Protection Disc Brake Rotor 320.22023H is a rear replacement rotor for the 2012-2015 Land Rover Range Rover Evoque. It is built with a fully coated finish and high carbon content metallurgy to match OE-style braking performance while helping resist rust on exposed surfaces.
The GCX line is engineered around application-specific coating patterns and rotor metallurgy. For the Range Rover Evoque, that means a rear disc brake rotor with a smooth surface, coated hat, and corrosion protection on non-mating areas for cleaner appearance and longer service life.
Key Features
- Part number 320.22023H
- Fits 2012-2015 Land Rover Range Rover Evoque, rear
- Fully coated disc finish with coated hat
- High carbon content rotor metallurgy
- Solid rotor design with smooth surface type
- Outside diameter: 11.890 in. / 302.0 mm
- Nominal thickness: 0.433 in. / 11.0 mm
- Discard thickness: 0.354 in. / 9.0 mm
- 5-lug pattern with 108.0 mm bolt circle
- Floating disc mounting and 1 miscellaneous hole
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built to align with OE performance targets while adding corrosion protection on non-mating surfaces. The GCX platform uses application-specific coating patterns and metallurgy choices to better match the brake pad friction profile and the vehicle’s original rotor specification. For Range Rover Evoque rear brake service, this rotor provides the dimensions and construction needed for a direct replacement on the listed applications.
Part number 320.22023H is a practical choice for drivers servicing rear brake rotors on a 2012-2015 Land Rover Range Rover Evoque. If you are searching for a rear brake rotor for Land Rover Range Rover Evoque 2012-2015, or a Centric GCX rear rotor 320.22023H, this listing matches the confirmed fitment shown here.
What This Rotor Helps Address
- Rear rotor rust on exposed surfaces
- Brake pulsation caused by worn or below-spec rotors
- Reduced braking consistency from rotor wear
- Cosmetic corrosion on the hat and non-mating areas
- OE replacement needs for rear brake service on the Range Rover Evoque
Installation Notes and Tips
Verify rotor dimensions, hub fit, and brake pad condition before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect caliper hardware, slides, and pads for wear before completing the brake job. This rotor is listed for rear position only on the confirmed Range Rover Evoque applications.
Quality Assurance
Centric designs the GCX rotor line to match OE performance expectations and uses advanced RS200 coating on non-mating surfaces for added rust and corrosion protection. The high carbon alloy formulation is selected to align with the vehicle’s OEM metallurgical profile for the listed application. Part number 320.22023H is covered by Centric’s product engineering standards for the GCX line.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Rear Brake Rotor for Range Rover Evoque
Centric GCX Elemental Protection Disc Brake Rotor 320.22023H is a rear replacement rotor for the 2012-2015 Land Rover Range Rover Evoque. It is built with a fully coated finish and high carbon content metallurgy to match OE-style braking performance while helping resist rust on exposed surfaces.
The GCX line is engineered around application-specific coating patterns and rotor metallurgy. For the Range Rover Evoque, that means a rear disc brake rotor with a smooth surface, coated hat, and corrosion protection on non-mating areas for cleaner appearance and longer service life.
Key Features
- Part number 320.22023H
- Fits 2012-2015 Land Rover Range Rover Evoque, rear
- Fully coated disc finish with coated hat
- High carbon content rotor metallurgy
- Solid rotor design with smooth surface type
- Outside diameter: 11.890 in. / 302.0 mm
- Nominal thickness: 0.433 in. / 11.0 mm
- Discard thickness: 0.354 in. / 9.0 mm
- 5-lug pattern with 108.0 mm bolt circle
- Floating disc mounting and 1 miscellaneous hole
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built to align with OE performance targets while adding corrosion protection on non-mating surfaces. The GCX platform uses application-specific coating patterns and metallurgy choices to better match the brake pad friction profile and the vehicle’s original rotor specification. For Range Rover Evoque rear brake service, this rotor provides the dimensions and construction needed for a direct replacement on the listed applications.
Part number 320.22023H is a practical choice for drivers servicing rear brake rotors on a 2012-2015 Land Rover Range Rover Evoque. If you are searching for a rear brake rotor for Land Rover Range Rover Evoque 2012-2015, or a Centric GCX rear rotor 320.22023H, this listing matches the confirmed fitment shown here.
What This Rotor Helps Address
- Rear rotor rust on exposed surfaces
- Brake pulsation caused by worn or below-spec rotors
- Reduced braking consistency from rotor wear
- Cosmetic corrosion on the hat and non-mating areas
- OE replacement needs for rear brake service on the Range Rover Evoque
Installation Notes and Tips
Verify rotor dimensions, hub fit, and brake pad condition before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect caliper hardware, slides, and pads for wear before completing the brake job. This rotor is listed for rear position only on the confirmed Range Rover Evoque applications.
Quality Assurance
Centric designs the GCX rotor line to match OE performance expectations and uses advanced RS200 coating on non-mating surfaces for added rust and corrosion protection. The high carbon alloy formulation is selected to align with the vehicle’s OEM metallurgical profile for the listed application. Part number 320.22023H is covered by Centric’s product engineering standards for the GCX line.
