Centric 320.33038H Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for rear brake service on select Audi and Volkswagen applications. Part number 320.33038H combines a fully coated finish with high carbon metallurgy to support OE-style braking performance and corrosion resistance.
For Audi A6, Audi A6 Quattro, Audi 100, Audi 100 Quattro, and Volkswagen Passat rear brake repair, this rotor is engineered to match the original vehicle profile while helping maintain a clean, finished appearance over time.
Key Features
- Part number 320.33038H
- Fully coated disc finish with coated hat and non-mating surfaces
- High carbon rotor metallurgy for OE-matched application requirements
- Solid rotor design with smooth surface type
- Outside diameter: 245 mm (9.646 in.)
- Nominal thickness: 10.0 mm (0.390 in.)
- Discard thickness: 8.0 mm (0.315 in.)
- 5-lug pattern with 112 mm bolt circle and 68 mm center hole
- Rear position fitment for select Audi and Volkswagen models
Product Line Details
Centric GCX Elemental Protection Disc Brake Rotors are application-specific rotors built around two core factors: coating pattern and rotor metallurgy. The GCX line uses Centric’s RS200 finish on non-mating surfaces to help resist rust and corrosion, while the high carbon formulation is selected to align with the OEM metallurgical profile for the vehicle application. Part number 320.33038H follows that approach for rear brake service on the listed Audi and Volkswagen platforms.
Fitment
- Fits 2002-2005 Volkswagen Passat, rear
- Fits 1997-2000 Volkswagen Passat, rear
- Fits 1995-2004 Audi A6, rear
- Fits 1998-2001 Audi A6, rear; 320mm front disc note
- Fits 2000-2001 Volkswagen Passat, rear; front caliper installation note for chassis #3B-X-491 581 and later
- Fits 1995-1998 Audi A6 Quattro, rear
- Fits 1992-1994 Audi 100, rear
- Fits 1992-1994 Audi 100 Quattro, rear
Common Repair Uses
- Rear brake rotor replacement for rusted or worn Audi A6 and Volkswagen Passat rotors
- Correction of brake pulsation caused by rotor wear or thickness variation
- Service replacement for rear rotors with corrosion on non-mating surfaces
- Restoration of smooth rear braking performance on select Audi 100 and A6 models
- Replacement for rotors that have reached discard thickness
Installation Notes
Verify rotor dimensions, hub fit, and rear axle application before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. Confirm the vehicle’s brake configuration and model-year match the fitment list, especially on 1998-2001 Audi A6 and 2000-2001 Volkswagen Passat applications with listed notes.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets while using corrosion-resistant coating coverage on non-mating surfaces. The application-specific metallurgy and coating pattern are intended to support consistent fit and finish across the listed Audi and Volkswagen rear brake applications.
Centric 320.33038H Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for rear brake service on select Audi and Volkswagen applications. Part number 320.33038H combines a fully coated finish with high carbon metallurgy to support OE-style braking performance and corrosion resistance.
For Audi A6, Audi A6 Quattro, Audi 100, Audi 100 Quattro, and Volkswagen Passat rear brake repair, this rotor is engineered to match the original vehicle profile while helping maintain a clean, finished appearance over time.
Key Features
- Part number 320.33038H
- Fully coated disc finish with coated hat and non-mating surfaces
- High carbon rotor metallurgy for OE-matched application requirements
- Solid rotor design with smooth surface type
- Outside diameter: 245 mm (9.646 in.)
- Nominal thickness: 10.0 mm (0.390 in.)
- Discard thickness: 8.0 mm (0.315 in.)
- 5-lug pattern with 112 mm bolt circle and 68 mm center hole
- Rear position fitment for select Audi and Volkswagen models
Product Line Details
Centric GCX Elemental Protection Disc Brake Rotors are application-specific rotors built around two core factors: coating pattern and rotor metallurgy. The GCX line uses Centric’s RS200 finish on non-mating surfaces to help resist rust and corrosion, while the high carbon formulation is selected to align with the OEM metallurgical profile for the vehicle application. Part number 320.33038H follows that approach for rear brake service on the listed Audi and Volkswagen platforms.
Fitment
- Fits 2002-2005 Volkswagen Passat, rear
- Fits 1997-2000 Volkswagen Passat, rear
- Fits 1995-2004 Audi A6, rear
- Fits 1998-2001 Audi A6, rear; 320mm front disc note
- Fits 2000-2001 Volkswagen Passat, rear; front caliper installation note for chassis #3B-X-491 581 and later
- Fits 1995-1998 Audi A6 Quattro, rear
- Fits 1992-1994 Audi 100, rear
- Fits 1992-1994 Audi 100 Quattro, rear
Common Repair Uses
- Rear brake rotor replacement for rusted or worn Audi A6 and Volkswagen Passat rotors
- Correction of brake pulsation caused by rotor wear or thickness variation
- Service replacement for rear rotors with corrosion on non-mating surfaces
- Restoration of smooth rear braking performance on select Audi 100 and A6 models
- Replacement for rotors that have reached discard thickness
Installation Notes
Verify rotor dimensions, hub fit, and rear axle application before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. Confirm the vehicle’s brake configuration and model-year match the fitment list, especially on 1998-2001 Audi A6 and 2000-2001 Volkswagen Passat applications with listed notes.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets while using corrosion-resistant coating coverage on non-mating surfaces. The application-specific metallurgy and coating pattern are intended to support consistent fit and finish across the listed Audi and Volkswagen rear brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Rear Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for rear brake service on select Audi and Volkswagen applications. Part number 320.33038H combines a fully coated finish with high carbon metallurgy to support OE-style braking performance and corrosion resistance.
For Audi A6, Audi A6 Quattro, Audi 100, Audi 100 Quattro, and Volkswagen Passat rear brake repair, this rotor is engineered to match the original vehicle profile while helping maintain a clean, finished appearance over time.
Key Features
- Part number 320.33038H
- Fully coated disc finish with coated hat and non-mating surfaces
- High carbon rotor metallurgy for OE-matched application requirements
- Solid rotor design with smooth surface type
- Outside diameter: 245 mm (9.646 in.)
- Nominal thickness: 10.0 mm (0.390 in.)
- Discard thickness: 8.0 mm (0.315 in.)
- 5-lug pattern with 112 mm bolt circle and 68 mm center hole
- Rear position fitment for select Audi and Volkswagen models
Product Line Details
Centric GCX Elemental Protection Disc Brake Rotors are application-specific rotors built around two core factors: coating pattern and rotor metallurgy. The GCX line uses Centric’s RS200 finish on non-mating surfaces to help resist rust and corrosion, while the high carbon formulation is selected to align with the OEM metallurgical profile for the vehicle application. Part number 320.33038H follows that approach for rear brake service on the listed Audi and Volkswagen platforms.
Fitment
- Fits 2002-2005 Volkswagen Passat, rear
- Fits 1997-2000 Volkswagen Passat, rear
- Fits 1995-2004 Audi A6, rear
- Fits 1998-2001 Audi A6, rear; 320mm front disc note
- Fits 2000-2001 Volkswagen Passat, rear; front caliper installation note for chassis #3B-X-491 581 and later
- Fits 1995-1998 Audi A6 Quattro, rear
- Fits 1992-1994 Audi 100, rear
- Fits 1992-1994 Audi 100 Quattro, rear
Common Repair Uses
- Rear brake rotor replacement for rusted or worn Audi A6 and Volkswagen Passat rotors
- Correction of brake pulsation caused by rotor wear or thickness variation
- Service replacement for rear rotors with corrosion on non-mating surfaces
- Restoration of smooth rear braking performance on select Audi 100 and A6 models
- Replacement for rotors that have reached discard thickness
Installation Notes
Verify rotor dimensions, hub fit, and rear axle application before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. Confirm the vehicle’s brake configuration and model-year match the fitment list, especially on 1998-2001 Audi A6 and 2000-2001 Volkswagen Passat applications with listed notes.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets while using corrosion-resistant coating coverage on non-mating surfaces. The application-specific metallurgy and coating pattern are intended to support consistent fit and finish across the listed Audi and Volkswagen rear brake applications.
