Centric 320.33059F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for front brake applications that need OE-style fitment, stable braking performance, and long-term corrosion resistance. This fully coated rotor uses Centric’s RS200 finish on non-mating surfaces to help maintain a cleaner appearance while protecting exposed metal.
Part number 320.33059F is a vented, smooth-surface rotor with a 288 mm outside diameter, 25.0 mm nominal thickness, and 22.0 mm discard thickness. It is engineered for front brake service on select Volkswagen Polo, Volkswagen Vento, Audi A1, Volkswagen Beetle, Volkswagen Jetta, Volkswagen Golf, and Audi A3 applications.
Key Features
- Fully coated disc finish with coated hat for rust and corrosion protection
- Vented rotor design for front brake use
- Smooth surface type for consistent pad contact
- 288 mm outside diameter with OE-style dimensions
- 5-lug pattern, 100 mm bolt circle, floating disc mounting
- Centric GCX application-specific metallurgy matched to OEM profiles
- Part number 320.33059F for fitment-based ordering
GCX Elemental Protection Line
Centric’s GCX Elemental Protection line focuses on matching OE performance while adding full-surface protection on exposed areas. The coating pattern is application-specific, and the rotor metallurgy is selected to align with the vehicle’s original brake requirements. For shoppers comparing front brake rotor options for a Volkswagen Polo, Audi A1, or Volkswagen Jetta, this line is built to deliver the correct fit and finish for daily driving conditions.
Detailed Description
Centric 320.33059F is a front disc brake rotor with a vented construction, straight vane style, and floating disc mounting. The rotor measures 288.0 mm in outside diameter, 34.2 mm in overall height, and 65.0 mm at the center hole diameter. Additional dimensions include a 135.26 mm hat ID, 100.0 mm bolt circle, and 15.8 mm lug hole diameter. The fully coated finish helps protect the rotor’s non-mating surfaces from rust, while the smooth braking surface supports even pad engagement.
This rotor is a direct-fit choice for front brake service on 1998-2005 Audi A3, 1999-2005 Volkswagen Beetle, 1999-2005 Volkswagen Jetta, 1999-2002 Volkswagen Golf, 2003-2007 Volkswagen Polo, 2009-2011 Volkswagen Beetle, 2010-2011 Volkswagen Beetle Cabrio, 2011-2015 Audi A1, 2016-2018 Audi A1, 2017-2019 Volkswagen Polo, 2018-2019 Volkswagen Vento, and 2018-2019 Volkswagen Polo front applications. The part number 320.33059F is also listed for 2014 and 2018 Volkswagen Polo front fitments.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from uneven rotor wear
- Noise or rough pad contact from damaged rotor surfaces
- Fitment issues when replacing an OE-style 288 mm front rotor
Installation Notes and Tips
Verify rotor diameter, center bore, bolt circle, and vented construction before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. Inspect pads, caliper condition, and hub surface before mounting the new rotor to help ensure proper brake operation. For best results, follow the vehicle manufacturer’s brake service procedure and bed in new pads according to the pad maker’s instructions.
Quality Assurance
Centric designs the GCX line to match OE performance targets while using corrosion-protective coatings and vehicle-specific metallurgy. The brand’s application coverage spans a wide range of import vehicles, including Volkswagen Polo, Audi A1, and Volkswagen Jetta front brake applications. No warranty information was provided in the product data.
Centric 320.33059F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for front brake applications that need OE-style fitment, stable braking performance, and long-term corrosion resistance. This fully coated rotor uses Centric’s RS200 finish on non-mating surfaces to help maintain a cleaner appearance while protecting exposed metal.
Part number 320.33059F is a vented, smooth-surface rotor with a 288 mm outside diameter, 25.0 mm nominal thickness, and 22.0 mm discard thickness. It is engineered for front brake service on select Volkswagen Polo, Volkswagen Vento, Audi A1, Volkswagen Beetle, Volkswagen Jetta, Volkswagen Golf, and Audi A3 applications.
Key Features
- Fully coated disc finish with coated hat for rust and corrosion protection
- Vented rotor design for front brake use
- Smooth surface type for consistent pad contact
- 288 mm outside diameter with OE-style dimensions
- 5-lug pattern, 100 mm bolt circle, floating disc mounting
- Centric GCX application-specific metallurgy matched to OEM profiles
- Part number 320.33059F for fitment-based ordering
GCX Elemental Protection Line
Centric’s GCX Elemental Protection line focuses on matching OE performance while adding full-surface protection on exposed areas. The coating pattern is application-specific, and the rotor metallurgy is selected to align with the vehicle’s original brake requirements. For shoppers comparing front brake rotor options for a Volkswagen Polo, Audi A1, or Volkswagen Jetta, this line is built to deliver the correct fit and finish for daily driving conditions.
Detailed Description
Centric 320.33059F is a front disc brake rotor with a vented construction, straight vane style, and floating disc mounting. The rotor measures 288.0 mm in outside diameter, 34.2 mm in overall height, and 65.0 mm at the center hole diameter. Additional dimensions include a 135.26 mm hat ID, 100.0 mm bolt circle, and 15.8 mm lug hole diameter. The fully coated finish helps protect the rotor’s non-mating surfaces from rust, while the smooth braking surface supports even pad engagement.
This rotor is a direct-fit choice for front brake service on 1998-2005 Audi A3, 1999-2005 Volkswagen Beetle, 1999-2005 Volkswagen Jetta, 1999-2002 Volkswagen Golf, 2003-2007 Volkswagen Polo, 2009-2011 Volkswagen Beetle, 2010-2011 Volkswagen Beetle Cabrio, 2011-2015 Audi A1, 2016-2018 Audi A1, 2017-2019 Volkswagen Polo, 2018-2019 Volkswagen Vento, and 2018-2019 Volkswagen Polo front applications. The part number 320.33059F is also listed for 2014 and 2018 Volkswagen Polo front fitments.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from uneven rotor wear
- Noise or rough pad contact from damaged rotor surfaces
- Fitment issues when replacing an OE-style 288 mm front rotor
Installation Notes and Tips
Verify rotor diameter, center bore, bolt circle, and vented construction before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. Inspect pads, caliper condition, and hub surface before mounting the new rotor to help ensure proper brake operation. For best results, follow the vehicle manufacturer’s brake service procedure and bed in new pads according to the pad maker’s instructions.
Quality Assurance
Centric designs the GCX line to match OE performance targets while using corrosion-protective coatings and vehicle-specific metallurgy. The brand’s application coverage spans a wide range of import vehicles, including Volkswagen Polo, Audi A1, and Volkswagen Jetta front brake applications. No warranty information was provided in the product data.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for front brake applications that need OE-style fitment, stable braking performance, and long-term corrosion resistance. This fully coated rotor uses Centric’s RS200 finish on non-mating surfaces to help maintain a cleaner appearance while protecting exposed metal.
Part number 320.33059F is a vented, smooth-surface rotor with a 288 mm outside diameter, 25.0 mm nominal thickness, and 22.0 mm discard thickness. It is engineered for front brake service on select Volkswagen Polo, Volkswagen Vento, Audi A1, Volkswagen Beetle, Volkswagen Jetta, Volkswagen Golf, and Audi A3 applications.
Key Features
- Fully coated disc finish with coated hat for rust and corrosion protection
- Vented rotor design for front brake use
- Smooth surface type for consistent pad contact
- 288 mm outside diameter with OE-style dimensions
- 5-lug pattern, 100 mm bolt circle, floating disc mounting
- Centric GCX application-specific metallurgy matched to OEM profiles
- Part number 320.33059F for fitment-based ordering
GCX Elemental Protection Line
Centric’s GCX Elemental Protection line focuses on matching OE performance while adding full-surface protection on exposed areas. The coating pattern is application-specific, and the rotor metallurgy is selected to align with the vehicle’s original brake requirements. For shoppers comparing front brake rotor options for a Volkswagen Polo, Audi A1, or Volkswagen Jetta, this line is built to deliver the correct fit and finish for daily driving conditions.
Detailed Description
Centric 320.33059F is a front disc brake rotor with a vented construction, straight vane style, and floating disc mounting. The rotor measures 288.0 mm in outside diameter, 34.2 mm in overall height, and 65.0 mm at the center hole diameter. Additional dimensions include a 135.26 mm hat ID, 100.0 mm bolt circle, and 15.8 mm lug hole diameter. The fully coated finish helps protect the rotor’s non-mating surfaces from rust, while the smooth braking surface supports even pad engagement.
This rotor is a direct-fit choice for front brake service on 1998-2005 Audi A3, 1999-2005 Volkswagen Beetle, 1999-2005 Volkswagen Jetta, 1999-2002 Volkswagen Golf, 2003-2007 Volkswagen Polo, 2009-2011 Volkswagen Beetle, 2010-2011 Volkswagen Beetle Cabrio, 2011-2015 Audi A1, 2016-2018 Audi A1, 2017-2019 Volkswagen Polo, 2018-2019 Volkswagen Vento, and 2018-2019 Volkswagen Polo front applications. The part number 320.33059F is also listed for 2014 and 2018 Volkswagen Polo front fitments.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking consistency from uneven rotor wear
- Noise or rough pad contact from damaged rotor surfaces
- Fitment issues when replacing an OE-style 288 mm front rotor
Installation Notes and Tips
Verify rotor diameter, center bore, bolt circle, and vented construction before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. Inspect pads, caliper condition, and hub surface before mounting the new rotor to help ensure proper brake operation. For best results, follow the vehicle manufacturer’s brake service procedure and bed in new pads according to the pad maker’s instructions.
Quality Assurance
Centric designs the GCX line to match OE performance targets while using corrosion-protective coatings and vehicle-specific metallurgy. The brand’s application coverage spans a wide range of import vehicles, including Volkswagen Polo, Audi A1, and Volkswagen Jetta front brake applications. No warranty information was provided in the product data.
