Centric 320.33096F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Audi
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33096F, is a front vented rotor built for Audi applications that require a 320 mm front disc. It combines a fully coated disc finish with a coated hat finish to help resist corrosion on exposed brake surfaces.
For Audi A4, A4 Quattro, A6, A6 Quattro, S4, and Allroad Quattro front brake service, this rotor is sized for direct replacement applications listed below. The smooth surface, straight vane design, and floating disc mounting support consistent braking performance in everyday driving.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.33096F
- Front position rotor for select Audi models
- Fully coated disc finish with coated hat finish
- Vented rotor construction with straight vane style
- Smooth surface type for brake pad contact
- Outside diameter: 12.587 in. / 319.700 mm
- Nominal thickness: 1.181 in. / 30.000 mm
- Discard thickness: 1.102 in. / 28.000 mm
- 5 lug holes, 112.700 mm bolt circle diameter
- Center hole diameter: 2.677 in. / 68.000 mm
Product Details
The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line focuses on corrosion protection across the rotor surfaces that are most exposed to moisture and road debris. On this rotor, the fully coated disc and coated hat finish help maintain a cleaner appearance while supporting long-term service in front brake applications. The floating disc mounting and vented construction are matched to the listed Audi fitments, including 2005-2009 Audi A4 front, 2007-2009 Audi A4 Quattro front, 2001-2005 Audi Allroad Quattro front, 2002-2004 Audi A6 front, 2002-2004 Audi A6 Quattro front, and 2000-2002 Audi S4 front. Part number 320.33096F is also listed for 2001-2008 Audi A4 front and 1998-2001 Audi A6 front applications with the specified 320 mm front disc configuration.
Common Brake Issues This Rotor Can Address
- Front brake rotor wear that requires replacement at the listed discard thickness
- Corrosion on exposed rotor surfaces and hat area
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced braking consistency from heat-stressed vented rotors
- Fitment concerns on Audi models with a 320 mm front disc setup
Installation Notes and Tips
Verify rotor diameter, center hole diameter, bolt circle, and front brake configuration before installation. This rotor is listed for front use only and does not include bearings or an ABS tone ring. Confirm pad condition, caliper hardware condition, and hub surface cleanliness during brake service to help ensure proper rotor seating on Audi A4, A4 Quattro, A6, A6 Quattro, S4, and Allroad Quattro applications.
Quality Assurance
Centric brake components are built for OE-style fitment and application-specific replacement use. This rotor is identified by part number 320.33096F and is engineered to match the listed Audi front brake specifications for the covered model years.
Centric 320.33096F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Audi
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33096F, is a front vented rotor built for Audi applications that require a 320 mm front disc. It combines a fully coated disc finish with a coated hat finish to help resist corrosion on exposed brake surfaces.
For Audi A4, A4 Quattro, A6, A6 Quattro, S4, and Allroad Quattro front brake service, this rotor is sized for direct replacement applications listed below. The smooth surface, straight vane design, and floating disc mounting support consistent braking performance in everyday driving.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.33096F
- Front position rotor for select Audi models
- Fully coated disc finish with coated hat finish
- Vented rotor construction with straight vane style
- Smooth surface type for brake pad contact
- Outside diameter: 12.587 in. / 319.700 mm
- Nominal thickness: 1.181 in. / 30.000 mm
- Discard thickness: 1.102 in. / 28.000 mm
- 5 lug holes, 112.700 mm bolt circle diameter
- Center hole diameter: 2.677 in. / 68.000 mm
Product Details
The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line focuses on corrosion protection across the rotor surfaces that are most exposed to moisture and road debris. On this rotor, the fully coated disc and coated hat finish help maintain a cleaner appearance while supporting long-term service in front brake applications. The floating disc mounting and vented construction are matched to the listed Audi fitments, including 2005-2009 Audi A4 front, 2007-2009 Audi A4 Quattro front, 2001-2005 Audi Allroad Quattro front, 2002-2004 Audi A6 front, 2002-2004 Audi A6 Quattro front, and 2000-2002 Audi S4 front. Part number 320.33096F is also listed for 2001-2008 Audi A4 front and 1998-2001 Audi A6 front applications with the specified 320 mm front disc configuration.
Common Brake Issues This Rotor Can Address
- Front brake rotor wear that requires replacement at the listed discard thickness
- Corrosion on exposed rotor surfaces and hat area
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced braking consistency from heat-stressed vented rotors
- Fitment concerns on Audi models with a 320 mm front disc setup
Installation Notes and Tips
Verify rotor diameter, center hole diameter, bolt circle, and front brake configuration before installation. This rotor is listed for front use only and does not include bearings or an ABS tone ring. Confirm pad condition, caliper hardware condition, and hub surface cleanliness during brake service to help ensure proper rotor seating on Audi A4, A4 Quattro, A6, A6 Quattro, S4, and Allroad Quattro applications.
Quality Assurance
Centric brake components are built for OE-style fitment and application-specific replacement use. This rotor is identified by part number 320.33096F and is engineered to match the listed Audi front brake specifications for the covered model years.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for Audi
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33096F, is a front vented rotor built for Audi applications that require a 320 mm front disc. It combines a fully coated disc finish with a coated hat finish to help resist corrosion on exposed brake surfaces.
For Audi A4, A4 Quattro, A6, A6 Quattro, S4, and Allroad Quattro front brake service, this rotor is sized for direct replacement applications listed below. The smooth surface, straight vane design, and floating disc mounting support consistent braking performance in everyday driving.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.33096F
- Front position rotor for select Audi models
- Fully coated disc finish with coated hat finish
- Vented rotor construction with straight vane style
- Smooth surface type for brake pad contact
- Outside diameter: 12.587 in. / 319.700 mm
- Nominal thickness: 1.181 in. / 30.000 mm
- Discard thickness: 1.102 in. / 28.000 mm
- 5 lug holes, 112.700 mm bolt circle diameter
- Center hole diameter: 2.677 in. / 68.000 mm
Product Details
The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line focuses on corrosion protection across the rotor surfaces that are most exposed to moisture and road debris. On this rotor, the fully coated disc and coated hat finish help maintain a cleaner appearance while supporting long-term service in front brake applications. The floating disc mounting and vented construction are matched to the listed Audi fitments, including 2005-2009 Audi A4 front, 2007-2009 Audi A4 Quattro front, 2001-2005 Audi Allroad Quattro front, 2002-2004 Audi A6 front, 2002-2004 Audi A6 Quattro front, and 2000-2002 Audi S4 front. Part number 320.33096F is also listed for 2001-2008 Audi A4 front and 1998-2001 Audi A6 front applications with the specified 320 mm front disc configuration.
Common Brake Issues This Rotor Can Address
- Front brake rotor wear that requires replacement at the listed discard thickness
- Corrosion on exposed rotor surfaces and hat area
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced braking consistency from heat-stressed vented rotors
- Fitment concerns on Audi models with a 320 mm front disc setup
Installation Notes and Tips
Verify rotor diameter, center hole diameter, bolt circle, and front brake configuration before installation. This rotor is listed for front use only and does not include bearings or an ABS tone ring. Confirm pad condition, caliper hardware condition, and hub surface cleanliness during brake service to help ensure proper rotor seating on Audi A4, A4 Quattro, A6, A6 Quattro, S4, and Allroad Quattro applications.
Quality Assurance
Centric brake components are built for OE-style fitment and application-specific replacement use. This rotor is identified by part number 320.33096F and is engineered to match the listed Audi front brake specifications for the covered model years.
