Centric 320.33096H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Audi
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33096H, is built for front brake applications that need OE-style fit and corrosion resistance. It uses a fully coated finish on non-mating surfaces and a high-carbon rotor metallurgy to support consistent braking performance on Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, and S4 models.
Key Features
- Part number 320.33096H for front disc brake applications
- Fully coated disc finish with coated hat for rust and corrosion protection
- High carbon content rotor metallurgy matched to OEM-style profiles
- Vented rotor design with smooth surface type
- Outside diameter: 319.7 mm (12.587 in.)
- Nominal thickness: 30.0 mm (1.181 in.); discard thickness: 28.0 mm (1.102 in.)
- 5-lug pattern with 112.7 mm bolt circle and 68.0 mm center hole
- Straight vane style and floating disc mounting
GCX Elemental Protection Line
Centric’s GCX line is application-specific, with coating patterns and metallurgy selected to match OE brake pad friction characteristics and vehicle requirements. The GCX Elemental Protection Disc Brake Rotors - Full Coating, High Carbon Content line is focused on long-term surface protection and OE-level fitment, making it a practical choice for Audi front brake rotor replacement service.
Detailed Description
Centric 320.33096H is a vented front brake rotor engineered for select Audi platforms that use a 320 mm front disc. It is listed for 2001-2008 Audi A4 front, 2005-2009 Audi A4 front, 2007-2009 Audi A4 Quattro front, 2005-2006 Audi A4 Quattro front with chassis break 8E-5-400 001, 2001-2005 Audi Allroad Quattro front, 2002-2004 Audi A6 Quattro front with 2-pad front caliper, 2000-2002 Audi S4 front, 1998-2001 Audi A6 front, and 2000-2001 Audi A6 Quattro front. The fully coated finish helps protect exposed surfaces from rust, while the smooth braking surface and high-carbon construction support stable rotor performance in everyday driving.
This part cross-references common aftermarket rotor applications for the same vehicle platforms; verify exact OE dimensions and brake package details before ordering.
What It Helps Address
- Front brake rotor wear on Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, and S4 models
- Surface rust on exposed rotor areas
- Brake pulsation caused by worn or uneven rotors
- Noisy braking from rotor surface degradation
- Fitment issues on vehicles requiring a 320 mm front disc and 5-lug, 112.7 mm bolt circle setup
Installation Notes and Tips
Confirm rotor diameter, thickness, center hole diameter, and caliper configuration before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. For best results, inspect pads, calipers, and hub surfaces during brake service, and follow the vehicle manufacturer’s torque specifications during installation.
Quality Assurance
Centric designs GCX rotors to match OE performance targets while improving protection against rust and corrosion. The application-specific coating pattern and high-carbon metallurgy are intended to align with the brake system requirements of the listed Audi fitments, including 2001-2008 Audi A4 front and 2007-2009 Audi A4 Quattro front applications.
Centric 320.33096H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Audi
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33096H, is built for front brake applications that need OE-style fit and corrosion resistance. It uses a fully coated finish on non-mating surfaces and a high-carbon rotor metallurgy to support consistent braking performance on Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, and S4 models.
Key Features
- Part number 320.33096H for front disc brake applications
- Fully coated disc finish with coated hat for rust and corrosion protection
- High carbon content rotor metallurgy matched to OEM-style profiles
- Vented rotor design with smooth surface type
- Outside diameter: 319.7 mm (12.587 in.)
- Nominal thickness: 30.0 mm (1.181 in.); discard thickness: 28.0 mm (1.102 in.)
- 5-lug pattern with 112.7 mm bolt circle and 68.0 mm center hole
- Straight vane style and floating disc mounting
GCX Elemental Protection Line
Centric’s GCX line is application-specific, with coating patterns and metallurgy selected to match OE brake pad friction characteristics and vehicle requirements. The GCX Elemental Protection Disc Brake Rotors - Full Coating, High Carbon Content line is focused on long-term surface protection and OE-level fitment, making it a practical choice for Audi front brake rotor replacement service.
Detailed Description
Centric 320.33096H is a vented front brake rotor engineered for select Audi platforms that use a 320 mm front disc. It is listed for 2001-2008 Audi A4 front, 2005-2009 Audi A4 front, 2007-2009 Audi A4 Quattro front, 2005-2006 Audi A4 Quattro front with chassis break 8E-5-400 001, 2001-2005 Audi Allroad Quattro front, 2002-2004 Audi A6 Quattro front with 2-pad front caliper, 2000-2002 Audi S4 front, 1998-2001 Audi A6 front, and 2000-2001 Audi A6 Quattro front. The fully coated finish helps protect exposed surfaces from rust, while the smooth braking surface and high-carbon construction support stable rotor performance in everyday driving.
This part cross-references common aftermarket rotor applications for the same vehicle platforms; verify exact OE dimensions and brake package details before ordering.
What It Helps Address
- Front brake rotor wear on Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, and S4 models
- Surface rust on exposed rotor areas
- Brake pulsation caused by worn or uneven rotors
- Noisy braking from rotor surface degradation
- Fitment issues on vehicles requiring a 320 mm front disc and 5-lug, 112.7 mm bolt circle setup
Installation Notes and Tips
Confirm rotor diameter, thickness, center hole diameter, and caliper configuration before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. For best results, inspect pads, calipers, and hub surfaces during brake service, and follow the vehicle manufacturer’s torque specifications during installation.
Quality Assurance
Centric designs GCX rotors to match OE performance targets while improving protection against rust and corrosion. The application-specific coating pattern and high-carbon metallurgy are intended to align with the brake system requirements of the listed Audi fitments, including 2001-2008 Audi A4 front and 2007-2009 Audi A4 Quattro front applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for Audi
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33096H, is built for front brake applications that need OE-style fit and corrosion resistance. It uses a fully coated finish on non-mating surfaces and a high-carbon rotor metallurgy to support consistent braking performance on Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, and S4 models.
Key Features
- Part number 320.33096H for front disc brake applications
- Fully coated disc finish with coated hat for rust and corrosion protection
- High carbon content rotor metallurgy matched to OEM-style profiles
- Vented rotor design with smooth surface type
- Outside diameter: 319.7 mm (12.587 in.)
- Nominal thickness: 30.0 mm (1.181 in.); discard thickness: 28.0 mm (1.102 in.)
- 5-lug pattern with 112.7 mm bolt circle and 68.0 mm center hole
- Straight vane style and floating disc mounting
GCX Elemental Protection Line
Centric’s GCX line is application-specific, with coating patterns and metallurgy selected to match OE brake pad friction characteristics and vehicle requirements. The GCX Elemental Protection Disc Brake Rotors - Full Coating, High Carbon Content line is focused on long-term surface protection and OE-level fitment, making it a practical choice for Audi front brake rotor replacement service.
Detailed Description
Centric 320.33096H is a vented front brake rotor engineered for select Audi platforms that use a 320 mm front disc. It is listed for 2001-2008 Audi A4 front, 2005-2009 Audi A4 front, 2007-2009 Audi A4 Quattro front, 2005-2006 Audi A4 Quattro front with chassis break 8E-5-400 001, 2001-2005 Audi Allroad Quattro front, 2002-2004 Audi A6 Quattro front with 2-pad front caliper, 2000-2002 Audi S4 front, 1998-2001 Audi A6 front, and 2000-2001 Audi A6 Quattro front. The fully coated finish helps protect exposed surfaces from rust, while the smooth braking surface and high-carbon construction support stable rotor performance in everyday driving.
This part cross-references common aftermarket rotor applications for the same vehicle platforms; verify exact OE dimensions and brake package details before ordering.
What It Helps Address
- Front brake rotor wear on Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, and S4 models
- Surface rust on exposed rotor areas
- Brake pulsation caused by worn or uneven rotors
- Noisy braking from rotor surface degradation
- Fitment issues on vehicles requiring a 320 mm front disc and 5-lug, 112.7 mm bolt circle setup
Installation Notes and Tips
Confirm rotor diameter, thickness, center hole diameter, and caliper configuration before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. For best results, inspect pads, calipers, and hub surfaces during brake service, and follow the vehicle manufacturer’s torque specifications during installation.
Quality Assurance
Centric designs GCX rotors to match OE performance targets while improving protection against rust and corrosion. The application-specific coating pattern and high-carbon metallurgy are intended to align with the brake system requirements of the listed Audi fitments, including 2001-2008 Audi A4 front and 2007-2009 Audi A4 Quattro front applications.
