Centric 320.33104H Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor for Audi A6
Centric GCX Elemental Protection Disc Brake Rotor 320.33104H is built for rear brake service on select Audi A6 and Audi A6 Quattro applications. It combines a fully coated finish with high carbon metallurgy to match OE-style braking performance while helping resist rust and corrosion.
The GCX and GCX FC rotor line uses application-specific coating patterns and Centric’s RS200 finish on non-mating surfaces. For Audi A6 and Audi A6 Quattro rear brake repair, this rotor is engineered to deliver consistent fitment, smooth braking surfaces, and long-term appearance protection.
Key Features
- Part number 320.33104H
- Rear disc brake rotor for select Audi A6 and Audi A6 Quattro models
- Fully coated disc finish with coated hat surface
- High carbon rotor metallurgy for OE-style material matching
- Solid rotor design with smooth surface type
- Outside diameter: 301.8 mm (11.882 in)
- Nominal thickness: 12.0 mm (0.472 in)
- Discard thickness: 10.0 mm (0.394 in)
- 5-lug pattern with 112.2 mm bolt circle
- Center hole diameter: 68.0 mm
Product Details
Centric’s GCX Elemental Protection line is designed around vehicle-specific metallurgy and coating patterns. This rotor uses a high carbon alloy profile to align with OEM-style brake system requirements, while the full coating helps protect non-mating surfaces from rust and corrosion. The result is a rear rotor that maintains a cleaner appearance and supports stable braking performance over time. Part number 320.33104H is a direct fit for the listed rear applications, including Audi A6 Quattro rear brake service and Audi A6 rear brake replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Helps Address
- Rear brake pulsation caused by worn or uneven rotor surfaces
- Rust buildup on exposed rotor areas
- Corrosion on the hat and non-friction surfaces
- Brake noise related to rotor wear or surface inconsistency
- Reduced braking feel from rotor thickness loss
Installation Notes and Tips
- Verify rear fitment by year, model, and brake configuration before installation.
- Inspect pads, calipers, and hub surfaces before mounting the new rotor.
- Clean the rotor friction surfaces before service to remove any protective residue.
- Measure rotor thickness and compare it to discard specifications during brake inspection.
- Follow the vehicle manufacturer’s brake service procedures for bedding and torque.
Quality Assurance
Centric GCX rotors are engineered to match OE performance targets and use Centric’s RS200 coating on non-mating surfaces for added rust and corrosion protection. The GCX line is built with application-specific coating patterns and high carbon metallurgy to support consistent brake service on the listed Audi A6 and Audi A6 Quattro rear applications.
Original: $48.62
-65%$48.62
$17.02Centric 320.33104H Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor for Audi A6
Centric GCX Elemental Protection Disc Brake Rotor 320.33104H is built for rear brake service on select Audi A6 and Audi A6 Quattro applications. It combines a fully coated finish with high carbon metallurgy to match OE-style braking performance while helping resist rust and corrosion.
The GCX and GCX FC rotor line uses application-specific coating patterns and Centric’s RS200 finish on non-mating surfaces. For Audi A6 and Audi A6 Quattro rear brake repair, this rotor is engineered to deliver consistent fitment, smooth braking surfaces, and long-term appearance protection.
Key Features
- Part number 320.33104H
- Rear disc brake rotor for select Audi A6 and Audi A6 Quattro models
- Fully coated disc finish with coated hat surface
- High carbon rotor metallurgy for OE-style material matching
- Solid rotor design with smooth surface type
- Outside diameter: 301.8 mm (11.882 in)
- Nominal thickness: 12.0 mm (0.472 in)
- Discard thickness: 10.0 mm (0.394 in)
- 5-lug pattern with 112.2 mm bolt circle
- Center hole diameter: 68.0 mm
Product Details
Centric’s GCX Elemental Protection line is designed around vehicle-specific metallurgy and coating patterns. This rotor uses a high carbon alloy profile to align with OEM-style brake system requirements, while the full coating helps protect non-mating surfaces from rust and corrosion. The result is a rear rotor that maintains a cleaner appearance and supports stable braking performance over time. Part number 320.33104H is a direct fit for the listed rear applications, including Audi A6 Quattro rear brake service and Audi A6 rear brake replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Helps Address
- Rear brake pulsation caused by worn or uneven rotor surfaces
- Rust buildup on exposed rotor areas
- Corrosion on the hat and non-friction surfaces
- Brake noise related to rotor wear or surface inconsistency
- Reduced braking feel from rotor thickness loss
Installation Notes and Tips
- Verify rear fitment by year, model, and brake configuration before installation.
- Inspect pads, calipers, and hub surfaces before mounting the new rotor.
- Clean the rotor friction surfaces before service to remove any protective residue.
- Measure rotor thickness and compare it to discard specifications during brake inspection.
- Follow the vehicle manufacturer’s brake service procedures for bedding and torque.
Quality Assurance
Centric GCX rotors are engineered to match OE performance targets and use Centric’s RS200 coating on non-mating surfaces for added rust and corrosion protection. The GCX line is built with application-specific coating patterns and high carbon metallurgy to support consistent brake service on the listed Audi A6 and Audi A6 Quattro rear applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Rear Brake Rotor for Audi A6
Centric GCX Elemental Protection Disc Brake Rotor 320.33104H is built for rear brake service on select Audi A6 and Audi A6 Quattro applications. It combines a fully coated finish with high carbon metallurgy to match OE-style braking performance while helping resist rust and corrosion.
The GCX and GCX FC rotor line uses application-specific coating patterns and Centric’s RS200 finish on non-mating surfaces. For Audi A6 and Audi A6 Quattro rear brake repair, this rotor is engineered to deliver consistent fitment, smooth braking surfaces, and long-term appearance protection.
Key Features
- Part number 320.33104H
- Rear disc brake rotor for select Audi A6 and Audi A6 Quattro models
- Fully coated disc finish with coated hat surface
- High carbon rotor metallurgy for OE-style material matching
- Solid rotor design with smooth surface type
- Outside diameter: 301.8 mm (11.882 in)
- Nominal thickness: 12.0 mm (0.472 in)
- Discard thickness: 10.0 mm (0.394 in)
- 5-lug pattern with 112.2 mm bolt circle
- Center hole diameter: 68.0 mm
Product Details
Centric’s GCX Elemental Protection line is designed around vehicle-specific metallurgy and coating patterns. This rotor uses a high carbon alloy profile to align with OEM-style brake system requirements, while the full coating helps protect non-mating surfaces from rust and corrosion. The result is a rear rotor that maintains a cleaner appearance and supports stable braking performance over time. Part number 320.33104H is a direct fit for the listed rear applications, including Audi A6 Quattro rear brake service and Audi A6 rear brake replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Helps Address
- Rear brake pulsation caused by worn or uneven rotor surfaces
- Rust buildup on exposed rotor areas
- Corrosion on the hat and non-friction surfaces
- Brake noise related to rotor wear or surface inconsistency
- Reduced braking feel from rotor thickness loss
Installation Notes and Tips
- Verify rear fitment by year, model, and brake configuration before installation.
- Inspect pads, calipers, and hub surfaces before mounting the new rotor.
- Clean the rotor friction surfaces before service to remove any protective residue.
- Measure rotor thickness and compare it to discard specifications during brake inspection.
- Follow the vehicle manufacturer’s brake service procedures for bedding and torque.
Quality Assurance
Centric GCX rotors are engineered to match OE performance targets and use Centric’s RS200 coating on non-mating surfaces for added rust and corrosion protection. The GCX line is built with application-specific coating patterns and high carbon metallurgy to support consistent brake service on the listed Audi A6 and Audi A6 Quattro rear applications.
