Centric 320.33107H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Audi
Centric GCX Elemental Protection Disc Brake Rotor 320.33107H is built for front brake service on select Audi A4, A4 Quattro, A6, A6 Quattro, A8, and A8 Quattro applications. It combines a fully coated finish with high-carbon metallurgy to match OE-style braking performance while helping resist rust on exposed surfaces.
The GCX Elemental Protection line uses Centric’s RS200 coating on non-mating surfaces and application-specific coating patterns to work with the brake pad friction type. For Audi A4 Quattro and Audi A6 front brake replacement, this rotor is sized for a 312 mm front disc application and is engineered to align with the vehicle’s original metallurgy profile.
Key Features
- Part number 320.33107H
- Front disc brake rotor for select Audi models
- Fully coated disc finish with coated hat for corrosion resistance
- High-carbon rotor metallurgy for OE-style thermal and wear characteristics
- Vented rotor design with straight vanes
- Smooth surface type
- 312 mm outside diameter
- Floating disc mounting with 5 lug holes
- Center hole diameter: 68.0 mm
- Mounting bolt circle diameter: 112.0 mm
Product Details
Centric’s GCX Elemental Protection Disc Brake Rotors are engineered to match original equipment performance while adding protection against rust and corrosion on exposed areas. This rotor uses a fully coated disc finish and coated hat, which helps maintain appearance and surface protection over time. The high-carbon construction supports consistent braking behavior and is selected to mirror the OEM metallurgical profile used on the covered Audi applications.
Fits 2004-2006 Audi A4 Quattro, front; Fits 2002 Audi A4 Quattro, front; Fits 2002-2005 Audi A4, front; Fits 2002-2004 Audi A6, front; Fits 2003-2004 Audi A6 Quattro, front; Fits 2003 Audi A4 Quattro, front; Fits 2002 Audi A6 Quattro, front; Fits 2000-2001 Audi A6, front; Fits 1998-2001 Audi A6 Quattro, front; Fits 2000 Audi A8, front; Fits 2000 Audi A8 Quattro, front; Fits 1999 Audi A6, front; Fits 1997-1999 Audi A8, front; Fits 1997-1999 Audi A8 Quattro, front; Fits 1998 Audi A6, front.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Brake pulsation caused by worn or uneven rotors
- Reduced braking consistency from heat-stressed rotor surfaces
- Noise or vibration associated with rotor wear
- Replacement needs for Audi A4, A4 Quattro, A6, A6 Quattro, A8, and A8 Quattro front brake service
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and brake pad condition before installation. Clean the rotor’s friction surfaces before use to remove any protective residue, and inspect calipers, slides, and hardware for wear that could affect braking performance. This rotor is a front application and should be matched to the vehicle’s original brake setup, including the 312 mm front disc configuration where specified.
Quality Assurance
Centric designs the GCX line to align with OE performance targets and uses application-specific coating patterns plus high-carbon metallurgy for consistent fit and finish. Part number 320.33107H is part of Centric’s broader GCX coverage for late-model and earlier Audi brake applications.
Centric 320.33107H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Audi
Centric GCX Elemental Protection Disc Brake Rotor 320.33107H is built for front brake service on select Audi A4, A4 Quattro, A6, A6 Quattro, A8, and A8 Quattro applications. It combines a fully coated finish with high-carbon metallurgy to match OE-style braking performance while helping resist rust on exposed surfaces.
The GCX Elemental Protection line uses Centric’s RS200 coating on non-mating surfaces and application-specific coating patterns to work with the brake pad friction type. For Audi A4 Quattro and Audi A6 front brake replacement, this rotor is sized for a 312 mm front disc application and is engineered to align with the vehicle’s original metallurgy profile.
Key Features
- Part number 320.33107H
- Front disc brake rotor for select Audi models
- Fully coated disc finish with coated hat for corrosion resistance
- High-carbon rotor metallurgy for OE-style thermal and wear characteristics
- Vented rotor design with straight vanes
- Smooth surface type
- 312 mm outside diameter
- Floating disc mounting with 5 lug holes
- Center hole diameter: 68.0 mm
- Mounting bolt circle diameter: 112.0 mm
Product Details
Centric’s GCX Elemental Protection Disc Brake Rotors are engineered to match original equipment performance while adding protection against rust and corrosion on exposed areas. This rotor uses a fully coated disc finish and coated hat, which helps maintain appearance and surface protection over time. The high-carbon construction supports consistent braking behavior and is selected to mirror the OEM metallurgical profile used on the covered Audi applications.
Fits 2004-2006 Audi A4 Quattro, front; Fits 2002 Audi A4 Quattro, front; Fits 2002-2005 Audi A4, front; Fits 2002-2004 Audi A6, front; Fits 2003-2004 Audi A6 Quattro, front; Fits 2003 Audi A4 Quattro, front; Fits 2002 Audi A6 Quattro, front; Fits 2000-2001 Audi A6, front; Fits 1998-2001 Audi A6 Quattro, front; Fits 2000 Audi A8, front; Fits 2000 Audi A8 Quattro, front; Fits 1999 Audi A6, front; Fits 1997-1999 Audi A8, front; Fits 1997-1999 Audi A8 Quattro, front; Fits 1998 Audi A6, front.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Brake pulsation caused by worn or uneven rotors
- Reduced braking consistency from heat-stressed rotor surfaces
- Noise or vibration associated with rotor wear
- Replacement needs for Audi A4, A4 Quattro, A6, A6 Quattro, A8, and A8 Quattro front brake service
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and brake pad condition before installation. Clean the rotor’s friction surfaces before use to remove any protective residue, and inspect calipers, slides, and hardware for wear that could affect braking performance. This rotor is a front application and should be matched to the vehicle’s original brake setup, including the 312 mm front disc configuration where specified.
Quality Assurance
Centric designs the GCX line to align with OE performance targets and uses application-specific coating patterns plus high-carbon metallurgy for consistent fit and finish. Part number 320.33107H is part of Centric’s broader GCX coverage for late-model and earlier Audi brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for Audi
Centric GCX Elemental Protection Disc Brake Rotor 320.33107H is built for front brake service on select Audi A4, A4 Quattro, A6, A6 Quattro, A8, and A8 Quattro applications. It combines a fully coated finish with high-carbon metallurgy to match OE-style braking performance while helping resist rust on exposed surfaces.
The GCX Elemental Protection line uses Centric’s RS200 coating on non-mating surfaces and application-specific coating patterns to work with the brake pad friction type. For Audi A4 Quattro and Audi A6 front brake replacement, this rotor is sized for a 312 mm front disc application and is engineered to align with the vehicle’s original metallurgy profile.
Key Features
- Part number 320.33107H
- Front disc brake rotor for select Audi models
- Fully coated disc finish with coated hat for corrosion resistance
- High-carbon rotor metallurgy for OE-style thermal and wear characteristics
- Vented rotor design with straight vanes
- Smooth surface type
- 312 mm outside diameter
- Floating disc mounting with 5 lug holes
- Center hole diameter: 68.0 mm
- Mounting bolt circle diameter: 112.0 mm
Product Details
Centric’s GCX Elemental Protection Disc Brake Rotors are engineered to match original equipment performance while adding protection against rust and corrosion on exposed areas. This rotor uses a fully coated disc finish and coated hat, which helps maintain appearance and surface protection over time. The high-carbon construction supports consistent braking behavior and is selected to mirror the OEM metallurgical profile used on the covered Audi applications.
Fits 2004-2006 Audi A4 Quattro, front; Fits 2002 Audi A4 Quattro, front; Fits 2002-2005 Audi A4, front; Fits 2002-2004 Audi A6, front; Fits 2003-2004 Audi A6 Quattro, front; Fits 2003 Audi A4 Quattro, front; Fits 2002 Audi A6 Quattro, front; Fits 2000-2001 Audi A6, front; Fits 1998-2001 Audi A6 Quattro, front; Fits 2000 Audi A8, front; Fits 2000 Audi A8 Quattro, front; Fits 1999 Audi A6, front; Fits 1997-1999 Audi A8, front; Fits 1997-1999 Audi A8 Quattro, front; Fits 1998 Audi A6, front.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Brake pulsation caused by worn or uneven rotors
- Reduced braking consistency from heat-stressed rotor surfaces
- Noise or vibration associated with rotor wear
- Replacement needs for Audi A4, A4 Quattro, A6, A6 Quattro, A8, and A8 Quattro front brake service
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and brake pad condition before installation. Clean the rotor’s friction surfaces before use to remove any protective residue, and inspect calipers, slides, and hardware for wear that could affect braking performance. This rotor is a front application and should be matched to the vehicle’s original brake setup, including the 312 mm front disc configuration where specified.
Quality Assurance
Centric designs the GCX line to align with OE performance targets and uses application-specific coating patterns plus high-carbon metallurgy for consistent fit and finish. Part number 320.33107H is part of Centric’s broader GCX coverage for late-model and earlier Audi brake applications.
