Centric 320.33108H Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor Overview
Centric GCX Elemental Protection Disc Brake Rotor 320.33108H is a rear solid rotor built to match OE performance while adding full-surface corrosion protection. It is a fitment-specific replacement for select Audi A4 and Audi A4 Quattro applications from 2001-2008, including rear brake service on the 2001-2008 Audi A4 and 2002-2006 Audi A4 Quattro.
The GCX rotor line uses Centric’s application-specific coating strategy and metallurgy to align with the brake pad friction type and the vehicle’s OEM-style material profile. For Audi A4 rear brake rotor replacement, 320.33108H is engineered for consistent fit, smooth braking contact, and long-term surface protection.
Key Features
- Part number 320.33108H
- Rear disc brake rotor for select Audi A4 and Audi A4 Quattro models
- Fully coated disc finish with coated hat for rust and corrosion resistance
- Solid rotor design with smooth surface type
- High carbon metallurgy for OE-style thermal and structural characteristics
- Outside diameter: 255.000 mm (10.039 in)
- Nominal thickness: 11.900 mm (0.469 in)
- Discard thickness: 10.000 mm (0.394 in)
- 5-lug pattern with 112.000 mm bolt circle diameter
- Center hole diameter: 68.000 mm
- Floating disc mounting with 1 miscellaneous hole
Product Details
Centric’s GCX Elemental Protection Disc Brake Rotors are built for drivers who want a direct-fit rear rotor with corrosion-resistant coating on non-mating surfaces. The GCX FC design and RS200 finish help protect the hat and outer surfaces from rust while leaving the braking surface ready for proper pad contact. This makes 320.33108H a practical choice for Audi A4 rear brake service where OE-style fitment, material consistency, and clean appearance matter. If you are searching for a rear brake rotor for 2001-2008 Audi A4 or 2002-2006 Audi A4 Quattro, this rotor matches the listed application data and dimensions.
This part cross-references no listed interchange part numbers in the provided data.
Common Problems This Rotor Helps Address
- Rear brake pulsation caused by worn or uneven rotor surfaces
- Brake noise related to rotor scoring or surface irregularity
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from rotor wear beyond discard thickness
- Fitment issues during rear brake rotor replacement on listed Audi applications
Installation Notes and Tips
Verify rear axle fitment by year, model, and notes before installation. Confirm rotor dimensions, 5-lug bolt pattern, 112.000 mm bolt circle diameter, and 68.000 mm center hole diameter against the vehicle hub. Inspect pads, caliper hardware, and hub condition before installing the new rotor, and clean the hub mounting surface to support proper rotor seating. For best results, follow the vehicle manufacturer’s brake service procedures and bed-in recommendations for the pad material being used.
Quality Assurance
Centric GCX rotors are engineered to match OE performance targets and use application-specific coating and metallurgy to support consistent fit and corrosion protection. The GCX line is built around Centric’s broad vehicle coverage and OE-style material profiling for dependable brake service on listed Audi applications.
Centric 320.33108H Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor Overview
Centric GCX Elemental Protection Disc Brake Rotor 320.33108H is a rear solid rotor built to match OE performance while adding full-surface corrosion protection. It is a fitment-specific replacement for select Audi A4 and Audi A4 Quattro applications from 2001-2008, including rear brake service on the 2001-2008 Audi A4 and 2002-2006 Audi A4 Quattro.
The GCX rotor line uses Centric’s application-specific coating strategy and metallurgy to align with the brake pad friction type and the vehicle’s OEM-style material profile. For Audi A4 rear brake rotor replacement, 320.33108H is engineered for consistent fit, smooth braking contact, and long-term surface protection.
Key Features
- Part number 320.33108H
- Rear disc brake rotor for select Audi A4 and Audi A4 Quattro models
- Fully coated disc finish with coated hat for rust and corrosion resistance
- Solid rotor design with smooth surface type
- High carbon metallurgy for OE-style thermal and structural characteristics
- Outside diameter: 255.000 mm (10.039 in)
- Nominal thickness: 11.900 mm (0.469 in)
- Discard thickness: 10.000 mm (0.394 in)
- 5-lug pattern with 112.000 mm bolt circle diameter
- Center hole diameter: 68.000 mm
- Floating disc mounting with 1 miscellaneous hole
Product Details
Centric’s GCX Elemental Protection Disc Brake Rotors are built for drivers who want a direct-fit rear rotor with corrosion-resistant coating on non-mating surfaces. The GCX FC design and RS200 finish help protect the hat and outer surfaces from rust while leaving the braking surface ready for proper pad contact. This makes 320.33108H a practical choice for Audi A4 rear brake service where OE-style fitment, material consistency, and clean appearance matter. If you are searching for a rear brake rotor for 2001-2008 Audi A4 or 2002-2006 Audi A4 Quattro, this rotor matches the listed application data and dimensions.
This part cross-references no listed interchange part numbers in the provided data.
Common Problems This Rotor Helps Address
- Rear brake pulsation caused by worn or uneven rotor surfaces
- Brake noise related to rotor scoring or surface irregularity
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from rotor wear beyond discard thickness
- Fitment issues during rear brake rotor replacement on listed Audi applications
Installation Notes and Tips
Verify rear axle fitment by year, model, and notes before installation. Confirm rotor dimensions, 5-lug bolt pattern, 112.000 mm bolt circle diameter, and 68.000 mm center hole diameter against the vehicle hub. Inspect pads, caliper hardware, and hub condition before installing the new rotor, and clean the hub mounting surface to support proper rotor seating. For best results, follow the vehicle manufacturer’s brake service procedures and bed-in recommendations for the pad material being used.
Quality Assurance
Centric GCX rotors are engineered to match OE performance targets and use application-specific coating and metallurgy to support consistent fit and corrosion protection. The GCX line is built around Centric’s broad vehicle coverage and OE-style material profiling for dependable brake service on listed Audi applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Rear Brake Rotor Overview
Centric GCX Elemental Protection Disc Brake Rotor 320.33108H is a rear solid rotor built to match OE performance while adding full-surface corrosion protection. It is a fitment-specific replacement for select Audi A4 and Audi A4 Quattro applications from 2001-2008, including rear brake service on the 2001-2008 Audi A4 and 2002-2006 Audi A4 Quattro.
The GCX rotor line uses Centric’s application-specific coating strategy and metallurgy to align with the brake pad friction type and the vehicle’s OEM-style material profile. For Audi A4 rear brake rotor replacement, 320.33108H is engineered for consistent fit, smooth braking contact, and long-term surface protection.
Key Features
- Part number 320.33108H
- Rear disc brake rotor for select Audi A4 and Audi A4 Quattro models
- Fully coated disc finish with coated hat for rust and corrosion resistance
- Solid rotor design with smooth surface type
- High carbon metallurgy for OE-style thermal and structural characteristics
- Outside diameter: 255.000 mm (10.039 in)
- Nominal thickness: 11.900 mm (0.469 in)
- Discard thickness: 10.000 mm (0.394 in)
- 5-lug pattern with 112.000 mm bolt circle diameter
- Center hole diameter: 68.000 mm
- Floating disc mounting with 1 miscellaneous hole
Product Details
Centric’s GCX Elemental Protection Disc Brake Rotors are built for drivers who want a direct-fit rear rotor with corrosion-resistant coating on non-mating surfaces. The GCX FC design and RS200 finish help protect the hat and outer surfaces from rust while leaving the braking surface ready for proper pad contact. This makes 320.33108H a practical choice for Audi A4 rear brake service where OE-style fitment, material consistency, and clean appearance matter. If you are searching for a rear brake rotor for 2001-2008 Audi A4 or 2002-2006 Audi A4 Quattro, this rotor matches the listed application data and dimensions.
This part cross-references no listed interchange part numbers in the provided data.
Common Problems This Rotor Helps Address
- Rear brake pulsation caused by worn or uneven rotor surfaces
- Brake noise related to rotor scoring or surface irregularity
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from rotor wear beyond discard thickness
- Fitment issues during rear brake rotor replacement on listed Audi applications
Installation Notes and Tips
Verify rear axle fitment by year, model, and notes before installation. Confirm rotor dimensions, 5-lug bolt pattern, 112.000 mm bolt circle diameter, and 68.000 mm center hole diameter against the vehicle hub. Inspect pads, caliper hardware, and hub condition before installing the new rotor, and clean the hub mounting surface to support proper rotor seating. For best results, follow the vehicle manufacturer’s brake service procedures and bed-in recommendations for the pad material being used.
Quality Assurance
Centric GCX rotors are engineered to match OE performance targets and use application-specific coating and metallurgy to support consistent fit and corrosion protection. The GCX line is built around Centric’s broad vehicle coverage and OE-style material profiling for dependable brake service on listed Audi applications.
