Centric 320.33111F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for OE-style braking performance with added resistance to rust and corrosion. This fully coated, vented front rotor is engineered for select Audi A6 and Audi A6 Quattro applications, including 2005-2011 Audi A6 and A6 Quattro front fitments.
Part number 320.33111F is part of Centric’s GCX Full Coating line, which uses application-specific coating patterns and rotor metallurgy to match the friction characteristics and OEM profile of the vehicle.
Key Features
- Fully coated disc brake rotor with coated hat and non-mating surfaces
- Vented rotor design with smooth braking surface
- Outside diameter: 12.638 in. / 321.0 mm
- Nominal thickness: 1.177 in. / 29.900 mm
- Discard thickness: 1.102 in. / 28.000 mm
- 5-lug pattern with 112.0 mm bolt circle diameter
- Floating disc mounting and straight vane style
- ABS tone ring not included
Product Details
Centric GCX rotors are engineered to align with OE performance targets while adding protection against surface corrosion. The RS200 finish is applied to the non-mating areas to help preserve appearance and durability over time, while the rotor metallurgy is matched to the vehicle’s OEM profile for consistent fit and braking behavior. This makes 320.33111F a practical choice for drivers looking for a front brake rotor for Audi A6 and Audi A6 Quattro models with the correct 321 mm front disc specification.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Front brake rotor wear that requires replacement
- Rust and corrosion on exposed rotor surfaces
- Brake pulsation caused by worn or uneven rotors
- Reduced braking consistency from rotor thickness loss
- Appearance issues from uncoated rotor surfaces
Installation Notes and Fitment
Fits 2006-2011 Audi A6, front.
Fits 2009-2011 Audi A6 Quattro, front, 321mm front disc; exc Armored.
Fits 2005-2008 Audi A6 Quattro, front.
Before installation, confirm rotor diameter, center hole diameter, bolt circle, and thickness against the existing brake setup. Replace rotors in line with the vehicle’s service procedure and inspect pads, caliper hardware, and hub condition for wear or corrosion that could affect braking performance.
Quality Assurance
Centric designs the GCX line to match OE performance requirements and uses application-specific coating and metallurgy to support consistent fitment across covered Audi applications. Part number 320.33111F is built for the listed front applications and dimensional specifications shown above.
Centric 320.33111F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for OE-style braking performance with added resistance to rust and corrosion. This fully coated, vented front rotor is engineered for select Audi A6 and Audi A6 Quattro applications, including 2005-2011 Audi A6 and A6 Quattro front fitments.
Part number 320.33111F is part of Centric’s GCX Full Coating line, which uses application-specific coating patterns and rotor metallurgy to match the friction characteristics and OEM profile of the vehicle.
Key Features
- Fully coated disc brake rotor with coated hat and non-mating surfaces
- Vented rotor design with smooth braking surface
- Outside diameter: 12.638 in. / 321.0 mm
- Nominal thickness: 1.177 in. / 29.900 mm
- Discard thickness: 1.102 in. / 28.000 mm
- 5-lug pattern with 112.0 mm bolt circle diameter
- Floating disc mounting and straight vane style
- ABS tone ring not included
Product Details
Centric GCX rotors are engineered to align with OE performance targets while adding protection against surface corrosion. The RS200 finish is applied to the non-mating areas to help preserve appearance and durability over time, while the rotor metallurgy is matched to the vehicle’s OEM profile for consistent fit and braking behavior. This makes 320.33111F a practical choice for drivers looking for a front brake rotor for Audi A6 and Audi A6 Quattro models with the correct 321 mm front disc specification.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Front brake rotor wear that requires replacement
- Rust and corrosion on exposed rotor surfaces
- Brake pulsation caused by worn or uneven rotors
- Reduced braking consistency from rotor thickness loss
- Appearance issues from uncoated rotor surfaces
Installation Notes and Fitment
Fits 2006-2011 Audi A6, front.
Fits 2009-2011 Audi A6 Quattro, front, 321mm front disc; exc Armored.
Fits 2005-2008 Audi A6 Quattro, front.
Before installation, confirm rotor diameter, center hole diameter, bolt circle, and thickness against the existing brake setup. Replace rotors in line with the vehicle’s service procedure and inspect pads, caliper hardware, and hub condition for wear or corrosion that could affect braking performance.
Quality Assurance
Centric designs the GCX line to match OE performance requirements and uses application-specific coating and metallurgy to support consistent fitment across covered Audi applications. Part number 320.33111F is built for the listed front applications and dimensional specifications shown above.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for OE-style braking performance with added resistance to rust and corrosion. This fully coated, vented front rotor is engineered for select Audi A6 and Audi A6 Quattro applications, including 2005-2011 Audi A6 and A6 Quattro front fitments.
Part number 320.33111F is part of Centric’s GCX Full Coating line, which uses application-specific coating patterns and rotor metallurgy to match the friction characteristics and OEM profile of the vehicle.
Key Features
- Fully coated disc brake rotor with coated hat and non-mating surfaces
- Vented rotor design with smooth braking surface
- Outside diameter: 12.638 in. / 321.0 mm
- Nominal thickness: 1.177 in. / 29.900 mm
- Discard thickness: 1.102 in. / 28.000 mm
- 5-lug pattern with 112.0 mm bolt circle diameter
- Floating disc mounting and straight vane style
- ABS tone ring not included
Product Details
Centric GCX rotors are engineered to align with OE performance targets while adding protection against surface corrosion. The RS200 finish is applied to the non-mating areas to help preserve appearance and durability over time, while the rotor metallurgy is matched to the vehicle’s OEM profile for consistent fit and braking behavior. This makes 320.33111F a practical choice for drivers looking for a front brake rotor for Audi A6 and Audi A6 Quattro models with the correct 321 mm front disc specification.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Front brake rotor wear that requires replacement
- Rust and corrosion on exposed rotor surfaces
- Brake pulsation caused by worn or uneven rotors
- Reduced braking consistency from rotor thickness loss
- Appearance issues from uncoated rotor surfaces
Installation Notes and Fitment
Fits 2006-2011 Audi A6, front.
Fits 2009-2011 Audi A6 Quattro, front, 321mm front disc; exc Armored.
Fits 2005-2008 Audi A6 Quattro, front.
Before installation, confirm rotor diameter, center hole diameter, bolt circle, and thickness against the existing brake setup. Replace rotors in line with the vehicle’s service procedure and inspect pads, caliper hardware, and hub condition for wear or corrosion that could affect braking performance.
Quality Assurance
Centric designs the GCX line to match OE performance requirements and uses application-specific coating and metallurgy to support consistent fitment across covered Audi applications. Part number 320.33111F is built for the listed front applications and dimensional specifications shown above.
