Centric 320.33123H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33123H, is a front vented rotor built for Audi applications that use a 320 mm front disc. It combines a fully coated disc finish with a coated hat finish to help resist corrosion on exposed surfaces.
For drivers searching for a front brake rotor for Audi A4, Audi A4 Quattro, Audi A5, Audi A5 Quattro, or Audi Q5, this Centric rotor is matched to the listed fitments and brake configurations. The 320.33123H rotor uses a smooth surface, pillar vane design, and floating disc mounting for the specified vehicles.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotor with full coating
- Part number 320.33123H
- Front position rotor for listed Audi applications
- Vented rotor design with pillar vane style
- Fully coated disc finish and coated hat finish
- 320 mm outside diameter with 29.8 mm nominal thickness
- 68 mm center hole diameter and 112 mm bolt circle diameter
- 5-lug pattern with floating disc mounting
- Smooth surface type for brake service replacement
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection for brake rotor surfaces that are exposed to moisture, road salt, and everyday driving conditions. This rotor is a vented, high-carbon content disc brake rotor with a smooth braking surface and coated exterior areas, making it a direct-fit replacement for the specified front brake applications. The 320.33123H is listed for 2008-2012 Audi A4, A4 Quattro, A5, A5 Quattro, and Q5 front brake setups, including 320 mm front disc applications with TRW/Girling front brakes where noted.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Front brake pulsation caused by rotor wear or thickness variation
- Corrosion on the rotor hat or outer surfaces
- Noise from worn or uneven braking surfaces
- Reduced braking consistency from heat-stressed rotors
- Service replacement for a damaged or below-spec front rotor
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and brake package before installation. This rotor is listed for front use only and does not include ABS tone ring or bearings. Confirm the vehicle’s brake setup matches the noted 320 mm front disc and TRW/Girling front brake applications where applicable. Clean the rotor surface before installation and follow the vehicle manufacturer’s torque and bedding procedures after service.
Quality Assurance
Centric GCX rotors are built with coated surfaces and high-carbon content construction for consistent service replacement in the listed Audi front brake applications. Part number 320.33123H is cataloged for direct fitment on the specified vehicles and brake configurations.
Original: $74.75
-65%$74.75
$26.16Centric 320.33123H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33123H, is a front vented rotor built for Audi applications that use a 320 mm front disc. It combines a fully coated disc finish with a coated hat finish to help resist corrosion on exposed surfaces.
For drivers searching for a front brake rotor for Audi A4, Audi A4 Quattro, Audi A5, Audi A5 Quattro, or Audi Q5, this Centric rotor is matched to the listed fitments and brake configurations. The 320.33123H rotor uses a smooth surface, pillar vane design, and floating disc mounting for the specified vehicles.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotor with full coating
- Part number 320.33123H
- Front position rotor for listed Audi applications
- Vented rotor design with pillar vane style
- Fully coated disc finish and coated hat finish
- 320 mm outside diameter with 29.8 mm nominal thickness
- 68 mm center hole diameter and 112 mm bolt circle diameter
- 5-lug pattern with floating disc mounting
- Smooth surface type for brake service replacement
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection for brake rotor surfaces that are exposed to moisture, road salt, and everyday driving conditions. This rotor is a vented, high-carbon content disc brake rotor with a smooth braking surface and coated exterior areas, making it a direct-fit replacement for the specified front brake applications. The 320.33123H is listed for 2008-2012 Audi A4, A4 Quattro, A5, A5 Quattro, and Q5 front brake setups, including 320 mm front disc applications with TRW/Girling front brakes where noted.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Front brake pulsation caused by rotor wear or thickness variation
- Corrosion on the rotor hat or outer surfaces
- Noise from worn or uneven braking surfaces
- Reduced braking consistency from heat-stressed rotors
- Service replacement for a damaged or below-spec front rotor
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and brake package before installation. This rotor is listed for front use only and does not include ABS tone ring or bearings. Confirm the vehicle’s brake setup matches the noted 320 mm front disc and TRW/Girling front brake applications where applicable. Clean the rotor surface before installation and follow the vehicle manufacturer’s torque and bedding procedures after service.
Quality Assurance
Centric GCX rotors are built with coated surfaces and high-carbon content construction for consistent service replacement in the listed Audi front brake applications. Part number 320.33123H is cataloged for direct fitment on the specified vehicles and brake configurations.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.33123H, is a front vented rotor built for Audi applications that use a 320 mm front disc. It combines a fully coated disc finish with a coated hat finish to help resist corrosion on exposed surfaces.
For drivers searching for a front brake rotor for Audi A4, Audi A4 Quattro, Audi A5, Audi A5 Quattro, or Audi Q5, this Centric rotor is matched to the listed fitments and brake configurations. The 320.33123H rotor uses a smooth surface, pillar vane design, and floating disc mounting for the specified vehicles.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotor with full coating
- Part number 320.33123H
- Front position rotor for listed Audi applications
- Vented rotor design with pillar vane style
- Fully coated disc finish and coated hat finish
- 320 mm outside diameter with 29.8 mm nominal thickness
- 68 mm center hole diameter and 112 mm bolt circle diameter
- 5-lug pattern with floating disc mounting
- Smooth surface type for brake service replacement
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection for brake rotor surfaces that are exposed to moisture, road salt, and everyday driving conditions. This rotor is a vented, high-carbon content disc brake rotor with a smooth braking surface and coated exterior areas, making it a direct-fit replacement for the specified front brake applications. The 320.33123H is listed for 2008-2012 Audi A4, A4 Quattro, A5, A5 Quattro, and Q5 front brake setups, including 320 mm front disc applications with TRW/Girling front brakes where noted.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Front brake pulsation caused by rotor wear or thickness variation
- Corrosion on the rotor hat or outer surfaces
- Noise from worn or uneven braking surfaces
- Reduced braking consistency from heat-stressed rotors
- Service replacement for a damaged or below-spec front rotor
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and brake package before installation. This rotor is listed for front use only and does not include ABS tone ring or bearings. Confirm the vehicle’s brake setup matches the noted 320 mm front disc and TRW/Girling front brake applications where applicable. Clean the rotor surface before installation and follow the vehicle manufacturer’s torque and bedding procedures after service.
Quality Assurance
Centric GCX rotors are built with coated surfaces and high-carbon content construction for consistent service replacement in the listed Audi front brake applications. Part number 320.33123H is cataloged for direct fitment on the specified vehicles and brake configurations.
