Centric 320.34049F Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor Protection
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.34049F, is built for rear brake service on select BMW applications. It uses a fully coated finish on non-mating surfaces to help resist rust and corrosion while maintaining OE-style braking performance.
Compatible with 1999-2006 BMW 323i, 328i, 328Ci, 325i, and 325Ci rear brake applications, this Centric rotor is engineered for a direct-fit replacement on the listed vehicles.
Key Features
- Fully coated disc finish with coated hat for added corrosion resistance
- Vented rotor design with smooth surface type
- Application-specific metallurgy to match OEM-style rotor requirements
- Centric RS200 coating on non-mating surfaces for long-term appearance and protection
- Rear position rotor for select BMW 3 Series models
- Part number 320.34049F for accurate catalog matching
Product Details
The Centric GCX Elemental Protection line is designed around vehicle-specific coating patterns and metallurgy. This rotor uses a high-carbon style formulation matched to OEM profiles where required, helping support consistent brake feel and wear characteristics. The 11.575-inch outside diameter, 0.748-inch nominal thickness, 2.350-inch overall height, 5-lug pattern, and 120 mm bolt circle reflect the listed rear fitment for BMW 323i, 328i, 328Ci, 325i, and 325Ci models. If you are replacing a rear brake rotor on a BMW 325Ci or BMW 328i, part number 320.34049F provides a cataloged OE-style solution with corrosion protection built into the finish.
What This Rotor Helps Address
- Rust buildup on exposed rotor surfaces
- Corrosion on the hat and non-mating areas
- Brake pulsation caused by worn rear rotors
- Reduced braking consistency from rotor wear
- Visual deterioration from untreated rotor surfaces
Installation Notes and Tips
Install on the rear axle only for the listed BMW applications. Verify rotor dimensions, hub fit, and brake pad condition before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Always confirm left/right rear brake service requirements and inspect calipers, pads, and hardware during rotor replacement.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets while using corrosion-resistant coatings and application-specific metallurgy. Part number 320.34049F is cataloged for the listed BMW rear applications, including 1999-2000 BMW 328i, 2000 BMW 328Ci, 2000-2001 BMW 323i, 2001-2005 BMW 325i, and 2001-2006 BMW 325Ci.
Centric 320.34049F Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor Protection
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.34049F, is built for rear brake service on select BMW applications. It uses a fully coated finish on non-mating surfaces to help resist rust and corrosion while maintaining OE-style braking performance.
Compatible with 1999-2006 BMW 323i, 328i, 328Ci, 325i, and 325Ci rear brake applications, this Centric rotor is engineered for a direct-fit replacement on the listed vehicles.
Key Features
- Fully coated disc finish with coated hat for added corrosion resistance
- Vented rotor design with smooth surface type
- Application-specific metallurgy to match OEM-style rotor requirements
- Centric RS200 coating on non-mating surfaces for long-term appearance and protection
- Rear position rotor for select BMW 3 Series models
- Part number 320.34049F for accurate catalog matching
Product Details
The Centric GCX Elemental Protection line is designed around vehicle-specific coating patterns and metallurgy. This rotor uses a high-carbon style formulation matched to OEM profiles where required, helping support consistent brake feel and wear characteristics. The 11.575-inch outside diameter, 0.748-inch nominal thickness, 2.350-inch overall height, 5-lug pattern, and 120 mm bolt circle reflect the listed rear fitment for BMW 323i, 328i, 328Ci, 325i, and 325Ci models. If you are replacing a rear brake rotor on a BMW 325Ci or BMW 328i, part number 320.34049F provides a cataloged OE-style solution with corrosion protection built into the finish.
What This Rotor Helps Address
- Rust buildup on exposed rotor surfaces
- Corrosion on the hat and non-mating areas
- Brake pulsation caused by worn rear rotors
- Reduced braking consistency from rotor wear
- Visual deterioration from untreated rotor surfaces
Installation Notes and Tips
Install on the rear axle only for the listed BMW applications. Verify rotor dimensions, hub fit, and brake pad condition before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Always confirm left/right rear brake service requirements and inspect calipers, pads, and hardware during rotor replacement.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets while using corrosion-resistant coatings and application-specific metallurgy. Part number 320.34049F is cataloged for the listed BMW rear applications, including 1999-2000 BMW 328i, 2000 BMW 328Ci, 2000-2001 BMW 323i, 2001-2005 BMW 325i, and 2001-2006 BMW 325Ci.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Rear Brake Rotor Protection
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.34049F, is built for rear brake service on select BMW applications. It uses a fully coated finish on non-mating surfaces to help resist rust and corrosion while maintaining OE-style braking performance.
Compatible with 1999-2006 BMW 323i, 328i, 328Ci, 325i, and 325Ci rear brake applications, this Centric rotor is engineered for a direct-fit replacement on the listed vehicles.
Key Features
- Fully coated disc finish with coated hat for added corrosion resistance
- Vented rotor design with smooth surface type
- Application-specific metallurgy to match OEM-style rotor requirements
- Centric RS200 coating on non-mating surfaces for long-term appearance and protection
- Rear position rotor for select BMW 3 Series models
- Part number 320.34049F for accurate catalog matching
Product Details
The Centric GCX Elemental Protection line is designed around vehicle-specific coating patterns and metallurgy. This rotor uses a high-carbon style formulation matched to OEM profiles where required, helping support consistent brake feel and wear characteristics. The 11.575-inch outside diameter, 0.748-inch nominal thickness, 2.350-inch overall height, 5-lug pattern, and 120 mm bolt circle reflect the listed rear fitment for BMW 323i, 328i, 328Ci, 325i, and 325Ci models. If you are replacing a rear brake rotor on a BMW 325Ci or BMW 328i, part number 320.34049F provides a cataloged OE-style solution with corrosion protection built into the finish.
What This Rotor Helps Address
- Rust buildup on exposed rotor surfaces
- Corrosion on the hat and non-mating areas
- Brake pulsation caused by worn rear rotors
- Reduced braking consistency from rotor wear
- Visual deterioration from untreated rotor surfaces
Installation Notes and Tips
Install on the rear axle only for the listed BMW applications. Verify rotor dimensions, hub fit, and brake pad condition before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Always confirm left/right rear brake service requirements and inspect calipers, pads, and hardware during rotor replacement.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets while using corrosion-resistant coatings and application-specific metallurgy. Part number 320.34049F is cataloged for the listed BMW rear applications, including 1999-2000 BMW 328i, 2000 BMW 328Ci, 2000-2001 BMW 323i, 2001-2005 BMW 325i, and 2001-2006 BMW 325Ci.
