Centric 320.34050H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for BMW X5
Centric GCX Elemental Protection Disc Brake Rotor 320.34050H is a front vented rotor engineered for OE-style braking performance with added resistance to rust and corrosion. It is built for 2000-2006 BMW X5 applications and uses a fully coated finish on non-mating surfaces for long-term appearance and protection.
Key Features
- Part number: 320.34050H
- Fits 2000-2004 BMW X5, front
- Fits 2005-2006 BMW X5, front
- Fully coated disc finish with coated hat for corrosion resistance
- Vented rotor design with straight vane style
- High carbon content metallurgy for OE-matched rotor performance
- Surface type: smooth
- Outside diameter: 332.0 mm (13.071 in)
- Nominal thickness: 30.0 mm (1.181 in)
- Discard thickness: 28.4 mm (1.118 in)
- 5-lug pattern with 120.0 mm bolt circle
Product Details
The Centric GCX line is built around application-specific rotor metallurgy and coating patterns to match original equipment requirements. For BMW X5 front brake service, this rotor uses a high carbon alloy profile and Centric’s RS200-style protective coating on non-mating surfaces to help maintain a cleaner rotor surface and reduce corrosion exposure over time. The 332 mm vented design, floating mounting style, and smooth braking surface support consistent front brake operation on the BMW X5. This part number, 320.34050H, is a direct-fit front rotor choice for 2000-2006 BMW X5 models listed below.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Corrosion buildup after winter driving or moisture exposure
- Brake pulsation caused by worn or below-spec rotors
- Noise or uneven braking from rotor surface wear
- Loss of braking consistency from rotor thickness reduction
Installation Notes and Tips
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is for front position BMW X5 applications only and uses a vented, smooth-face design. Inspect pads, calipers, and hub surfaces during brake service to ensure proper rotor seating and even braking contact. Confirm fitment by year and brake configuration before ordering; 320.34050H is listed for 2000-2004 BMW X5 front and 2005-2006 BMW X5 front applications.
Quality Assurance
Centric GCX rotors are engineered to align with OE performance targets while adding elemental protection against rust and corrosion. The GCX product line uses application-specific coating patterns and rotor metallurgy to match vehicle requirements, and Centric supports broad coverage across a large range of late-model and earlier vehicles. Part number 320.34050H is built for the BMW X5 front brake application shown in the fitment data.
Centric 320.34050H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for BMW X5
Centric GCX Elemental Protection Disc Brake Rotor 320.34050H is a front vented rotor engineered for OE-style braking performance with added resistance to rust and corrosion. It is built for 2000-2006 BMW X5 applications and uses a fully coated finish on non-mating surfaces for long-term appearance and protection.
Key Features
- Part number: 320.34050H
- Fits 2000-2004 BMW X5, front
- Fits 2005-2006 BMW X5, front
- Fully coated disc finish with coated hat for corrosion resistance
- Vented rotor design with straight vane style
- High carbon content metallurgy for OE-matched rotor performance
- Surface type: smooth
- Outside diameter: 332.0 mm (13.071 in)
- Nominal thickness: 30.0 mm (1.181 in)
- Discard thickness: 28.4 mm (1.118 in)
- 5-lug pattern with 120.0 mm bolt circle
Product Details
The Centric GCX line is built around application-specific rotor metallurgy and coating patterns to match original equipment requirements. For BMW X5 front brake service, this rotor uses a high carbon alloy profile and Centric’s RS200-style protective coating on non-mating surfaces to help maintain a cleaner rotor surface and reduce corrosion exposure over time. The 332 mm vented design, floating mounting style, and smooth braking surface support consistent front brake operation on the BMW X5. This part number, 320.34050H, is a direct-fit front rotor choice for 2000-2006 BMW X5 models listed below.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Corrosion buildup after winter driving or moisture exposure
- Brake pulsation caused by worn or below-spec rotors
- Noise or uneven braking from rotor surface wear
- Loss of braking consistency from rotor thickness reduction
Installation Notes and Tips
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is for front position BMW X5 applications only and uses a vented, smooth-face design. Inspect pads, calipers, and hub surfaces during brake service to ensure proper rotor seating and even braking contact. Confirm fitment by year and brake configuration before ordering; 320.34050H is listed for 2000-2004 BMW X5 front and 2005-2006 BMW X5 front applications.
Quality Assurance
Centric GCX rotors are engineered to align with OE performance targets while adding elemental protection against rust and corrosion. The GCX product line uses application-specific coating patterns and rotor metallurgy to match vehicle requirements, and Centric supports broad coverage across a large range of late-model and earlier vehicles. Part number 320.34050H is built for the BMW X5 front brake application shown in the fitment data.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for BMW X5
Centric GCX Elemental Protection Disc Brake Rotor 320.34050H is a front vented rotor engineered for OE-style braking performance with added resistance to rust and corrosion. It is built for 2000-2006 BMW X5 applications and uses a fully coated finish on non-mating surfaces for long-term appearance and protection.
Key Features
- Part number: 320.34050H
- Fits 2000-2004 BMW X5, front
- Fits 2005-2006 BMW X5, front
- Fully coated disc finish with coated hat for corrosion resistance
- Vented rotor design with straight vane style
- High carbon content metallurgy for OE-matched rotor performance
- Surface type: smooth
- Outside diameter: 332.0 mm (13.071 in)
- Nominal thickness: 30.0 mm (1.181 in)
- Discard thickness: 28.4 mm (1.118 in)
- 5-lug pattern with 120.0 mm bolt circle
Product Details
The Centric GCX line is built around application-specific rotor metallurgy and coating patterns to match original equipment requirements. For BMW X5 front brake service, this rotor uses a high carbon alloy profile and Centric’s RS200-style protective coating on non-mating surfaces to help maintain a cleaner rotor surface and reduce corrosion exposure over time. The 332 mm vented design, floating mounting style, and smooth braking surface support consistent front brake operation on the BMW X5. This part number, 320.34050H, is a direct-fit front rotor choice for 2000-2006 BMW X5 models listed below.
What This Rotor Helps Address
- Front brake rotor rust on exposed surfaces
- Corrosion buildup after winter driving or moisture exposure
- Brake pulsation caused by worn or below-spec rotors
- Noise or uneven braking from rotor surface wear
- Loss of braking consistency from rotor thickness reduction
Installation Notes and Tips
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is for front position BMW X5 applications only and uses a vented, smooth-face design. Inspect pads, calipers, and hub surfaces during brake service to ensure proper rotor seating and even braking contact. Confirm fitment by year and brake configuration before ordering; 320.34050H is listed for 2000-2004 BMW X5 front and 2005-2006 BMW X5 front applications.
Quality Assurance
Centric GCX rotors are engineered to align with OE performance targets while adding elemental protection against rust and corrosion. The GCX product line uses application-specific coating patterns and rotor metallurgy to match vehicle requirements, and Centric supports broad coverage across a large range of late-model and earlier vehicles. Part number 320.34050H is built for the BMW X5 front brake application shown in the fitment data.
