Centric 320.34077F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for BMW
Centric GCX Elemental Protection Disc Brake Rotor 320.34077F is a front vented rotor built for BMW applications that call for a 299.8 mm disc. It features a fully coated disc finish and coated hat finish to help resist corrosion on exposed surfaces.
Compatible With 2006-2015 BMW 320i, 2009-2013 BMW 125i, 2008-2013 BMW 128i, 2011 BMW 120i, 2006-2007 BMW 323i, 2007 BMW 328i, 2007 BMW 328xi, 2006 BMW 325i, and 2006 BMW 325xi, front.
Key Features
- Part number 320.34077F
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating product line
- Front disc brake rotor for BMW fitments listed below
- Vented rotor design with straight vane style
- Fully coated disc finish and coated hat finish
- Smooth surface type for brake pad contact
- Outside diameter: 11.803 in. / 299.800 mm
- Nominal thickness: 0.945 in. / 24.000 mm
- Discard thickness: 0.882 in. / 22.400 mm
- Center hole diameter: 3.110 in. / 79.000 mm
- 5 lug holes with 4.724 in. / 120.000 mm bolt circle
- Floating disc mounting with 1 miscellaneous hole
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor surfaces for daily-driven vehicles exposed to moisture, road salt, and stop-and-go braking. This Centric brake rotor uses a vented construction and smooth friction surface to support consistent front braking performance on BMW 3 Series and related models, including BMW 320i, BMW 128i, and BMW 328i applications. Part number 320.34077F is specified with a 299.8 mm outside diameter, 24.0 mm nominal thickness, and 22.4 mm discard thickness for proper service replacement selection.
What This Rotor Helps Address
- Front brake pulsation caused by worn or out-of-spec rotors
- Corrosion on exposed rotor surfaces and hat areas
- Reduced braking consistency from heat-stressed vented rotors
- Brake noise related to uneven rotor wear
- Fitment issues when replacing a 299.8 mm BMW front disc rotor
Installation Notes and Tips
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is for front applications only and does not include ABS tone ring or bearings. Confirm pad condition, caliper operation, and hub surface cleanliness during brake service to help ensure even rotor seating and proper braking feel.
Quality Assurance
Centric GCX rotors are built to OE-style dimensional standards for the listed BMW applications and are finished for added surface protection. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Centric 320.34077F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for BMW
Centric GCX Elemental Protection Disc Brake Rotor 320.34077F is a front vented rotor built for BMW applications that call for a 299.8 mm disc. It features a fully coated disc finish and coated hat finish to help resist corrosion on exposed surfaces.
Compatible With 2006-2015 BMW 320i, 2009-2013 BMW 125i, 2008-2013 BMW 128i, 2011 BMW 120i, 2006-2007 BMW 323i, 2007 BMW 328i, 2007 BMW 328xi, 2006 BMW 325i, and 2006 BMW 325xi, front.
Key Features
- Part number 320.34077F
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating product line
- Front disc brake rotor for BMW fitments listed below
- Vented rotor design with straight vane style
- Fully coated disc finish and coated hat finish
- Smooth surface type for brake pad contact
- Outside diameter: 11.803 in. / 299.800 mm
- Nominal thickness: 0.945 in. / 24.000 mm
- Discard thickness: 0.882 in. / 22.400 mm
- Center hole diameter: 3.110 in. / 79.000 mm
- 5 lug holes with 4.724 in. / 120.000 mm bolt circle
- Floating disc mounting with 1 miscellaneous hole
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor surfaces for daily-driven vehicles exposed to moisture, road salt, and stop-and-go braking. This Centric brake rotor uses a vented construction and smooth friction surface to support consistent front braking performance on BMW 3 Series and related models, including BMW 320i, BMW 128i, and BMW 328i applications. Part number 320.34077F is specified with a 299.8 mm outside diameter, 24.0 mm nominal thickness, and 22.4 mm discard thickness for proper service replacement selection.
What This Rotor Helps Address
- Front brake pulsation caused by worn or out-of-spec rotors
- Corrosion on exposed rotor surfaces and hat areas
- Reduced braking consistency from heat-stressed vented rotors
- Brake noise related to uneven rotor wear
- Fitment issues when replacing a 299.8 mm BMW front disc rotor
Installation Notes and Tips
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is for front applications only and does not include ABS tone ring or bearings. Confirm pad condition, caliper operation, and hub surface cleanliness during brake service to help ensure even rotor seating and proper braking feel.
Quality Assurance
Centric GCX rotors are built to OE-style dimensional standards for the listed BMW applications and are finished for added surface protection. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for BMW
Centric GCX Elemental Protection Disc Brake Rotor 320.34077F is a front vented rotor built for BMW applications that call for a 299.8 mm disc. It features a fully coated disc finish and coated hat finish to help resist corrosion on exposed surfaces.
Compatible With 2006-2015 BMW 320i, 2009-2013 BMW 125i, 2008-2013 BMW 128i, 2011 BMW 120i, 2006-2007 BMW 323i, 2007 BMW 328i, 2007 BMW 328xi, 2006 BMW 325i, and 2006 BMW 325xi, front.
Key Features
- Part number 320.34077F
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating product line
- Front disc brake rotor for BMW fitments listed below
- Vented rotor design with straight vane style
- Fully coated disc finish and coated hat finish
- Smooth surface type for brake pad contact
- Outside diameter: 11.803 in. / 299.800 mm
- Nominal thickness: 0.945 in. / 24.000 mm
- Discard thickness: 0.882 in. / 22.400 mm
- Center hole diameter: 3.110 in. / 79.000 mm
- 5 lug holes with 4.724 in. / 120.000 mm bolt circle
- Floating disc mounting with 1 miscellaneous hole
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor surfaces for daily-driven vehicles exposed to moisture, road salt, and stop-and-go braking. This Centric brake rotor uses a vented construction and smooth friction surface to support consistent front braking performance on BMW 3 Series and related models, including BMW 320i, BMW 128i, and BMW 328i applications. Part number 320.34077F is specified with a 299.8 mm outside diameter, 24.0 mm nominal thickness, and 22.4 mm discard thickness for proper service replacement selection.
What This Rotor Helps Address
- Front brake pulsation caused by worn or out-of-spec rotors
- Corrosion on exposed rotor surfaces and hat areas
- Reduced braking consistency from heat-stressed vented rotors
- Brake noise related to uneven rotor wear
- Fitment issues when replacing a 299.8 mm BMW front disc rotor
Installation Notes and Tips
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is for front applications only and does not include ABS tone ring or bearings. Confirm pad condition, caliper operation, and hub surface cleanliness during brake service to help ensure even rotor seating and proper braking feel.
Quality Assurance
Centric GCX rotors are built to OE-style dimensional standards for the listed BMW applications and are finished for added surface protection. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
