Centric 320.35057F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Mercedes-Benz
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.35057F, is a front vented rotor built for select Mercedes-Benz applications. It combines a fully coated disc finish with a coated hat to help resist corrosion while maintaining a smooth braking surface.
Compatible with 1996-2007 Mercedes-Benz C230, C240, C280, E300, and SLK230 front brake applications, this rotor is sized for vehicles using a 5-lug, 112 mm bolt circle and a 288 mm outside diameter. The Centric 320.35057F is a direct-fit replacement for drivers servicing front brake wear on covered Mercedes-Benz models.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Part number 320.35057F
- Fully coated disc finish with coated hat finish for added corrosion resistance
- Vented rotor design with pillar vane style
- Smooth surface type for consistent pad contact
- Floating disc mounting configuration
- 5 lug holes with 112 mm bolt circle diameter
- Front rotor application for select Mercedes-Benz models
Product Details
The Centric GCX line focuses on corrosion protection for daily-driven brake systems, and this rotor follows that approach with full coating coverage on the disc and hat. The rotor measures 288.000 mm in outside diameter, 25.000 mm nominal thickness, and 22.400 mm discard thickness, with a 46.500 mm overall height and 67.000 mm center hole diameter. It also uses a pillar vane vented construction to support heat management during braking.
Use part number 320.35057F when replacing a worn front rotor on Mercedes-Benz C230, C240, C280, E300, or SLK230 models listed in the fitment data. The Centric 320.35057F is a practical choice for front brake service where corrosion protection and OE-style dimensions matter.
What This Rotor Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Corrosion on exposed rotor surfaces and hat areas
- Reduced braking consistency from a worn front rotor
- Noise or vibration related to uneven rotor surfaces
- Front brake service needs on aging Mercedes-Benz platforms
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and caliper clearance before installation. This rotor is for front applications only and is listed for Mercedes-Benz C230, C240, C280, E300, and SLK230 models with the specified brake configurations, including C230 applications without the Sport Package and certain single-piston front caliper setups. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before completing brake service.
For fitment confirmation, use the vehicle notes exactly as listed: 2006-2007 Mercedes-Benz C230 front without Sport Package; 2004-2005 Mercedes-Benz C230 front single piston front caliper; 2001-2005 Mercedes-Benz C240 front; 1998-2004 Mercedes-Benz SLK230 front; 1996-2000 Mercedes-Benz C280 front; and 1996-1997 Mercedes-Benz E300 front.
Quality Assurance
Centric manufactures brake components for OE-style service applications, and the GCX Elemental Protection line is built around coated rotor construction for improved surface protection in demanding driving conditions. Part number 320.35057F is engineered to match the listed Mercedes-Benz front brake fitments and dimensional requirements.
Centric 320.35057F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Mercedes-Benz
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.35057F, is a front vented rotor built for select Mercedes-Benz applications. It combines a fully coated disc finish with a coated hat to help resist corrosion while maintaining a smooth braking surface.
Compatible with 1996-2007 Mercedes-Benz C230, C240, C280, E300, and SLK230 front brake applications, this rotor is sized for vehicles using a 5-lug, 112 mm bolt circle and a 288 mm outside diameter. The Centric 320.35057F is a direct-fit replacement for drivers servicing front brake wear on covered Mercedes-Benz models.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Part number 320.35057F
- Fully coated disc finish with coated hat finish for added corrosion resistance
- Vented rotor design with pillar vane style
- Smooth surface type for consistent pad contact
- Floating disc mounting configuration
- 5 lug holes with 112 mm bolt circle diameter
- Front rotor application for select Mercedes-Benz models
Product Details
The Centric GCX line focuses on corrosion protection for daily-driven brake systems, and this rotor follows that approach with full coating coverage on the disc and hat. The rotor measures 288.000 mm in outside diameter, 25.000 mm nominal thickness, and 22.400 mm discard thickness, with a 46.500 mm overall height and 67.000 mm center hole diameter. It also uses a pillar vane vented construction to support heat management during braking.
Use part number 320.35057F when replacing a worn front rotor on Mercedes-Benz C230, C240, C280, E300, or SLK230 models listed in the fitment data. The Centric 320.35057F is a practical choice for front brake service where corrosion protection and OE-style dimensions matter.
What This Rotor Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Corrosion on exposed rotor surfaces and hat areas
- Reduced braking consistency from a worn front rotor
- Noise or vibration related to uneven rotor surfaces
- Front brake service needs on aging Mercedes-Benz platforms
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and caliper clearance before installation. This rotor is for front applications only and is listed for Mercedes-Benz C230, C240, C280, E300, and SLK230 models with the specified brake configurations, including C230 applications without the Sport Package and certain single-piston front caliper setups. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before completing brake service.
For fitment confirmation, use the vehicle notes exactly as listed: 2006-2007 Mercedes-Benz C230 front without Sport Package; 2004-2005 Mercedes-Benz C230 front single piston front caliper; 2001-2005 Mercedes-Benz C240 front; 1998-2004 Mercedes-Benz SLK230 front; 1996-2000 Mercedes-Benz C280 front; and 1996-1997 Mercedes-Benz E300 front.
Quality Assurance
Centric manufactures brake components for OE-style service applications, and the GCX Elemental Protection line is built around coated rotor construction for improved surface protection in demanding driving conditions. Part number 320.35057F is engineered to match the listed Mercedes-Benz front brake fitments and dimensional requirements.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for Mercedes-Benz
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.35057F, is a front vented rotor built for select Mercedes-Benz applications. It combines a fully coated disc finish with a coated hat to help resist corrosion while maintaining a smooth braking surface.
Compatible with 1996-2007 Mercedes-Benz C230, C240, C280, E300, and SLK230 front brake applications, this rotor is sized for vehicles using a 5-lug, 112 mm bolt circle and a 288 mm outside diameter. The Centric 320.35057F is a direct-fit replacement for drivers servicing front brake wear on covered Mercedes-Benz models.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Part number 320.35057F
- Fully coated disc finish with coated hat finish for added corrosion resistance
- Vented rotor design with pillar vane style
- Smooth surface type for consistent pad contact
- Floating disc mounting configuration
- 5 lug holes with 112 mm bolt circle diameter
- Front rotor application for select Mercedes-Benz models
Product Details
The Centric GCX line focuses on corrosion protection for daily-driven brake systems, and this rotor follows that approach with full coating coverage on the disc and hat. The rotor measures 288.000 mm in outside diameter, 25.000 mm nominal thickness, and 22.400 mm discard thickness, with a 46.500 mm overall height and 67.000 mm center hole diameter. It also uses a pillar vane vented construction to support heat management during braking.
Use part number 320.35057F when replacing a worn front rotor on Mercedes-Benz C230, C240, C280, E300, or SLK230 models listed in the fitment data. The Centric 320.35057F is a practical choice for front brake service where corrosion protection and OE-style dimensions matter.
What This Rotor Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Corrosion on exposed rotor surfaces and hat areas
- Reduced braking consistency from a worn front rotor
- Noise or vibration related to uneven rotor surfaces
- Front brake service needs on aging Mercedes-Benz platforms
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and caliper clearance before installation. This rotor is for front applications only and is listed for Mercedes-Benz C230, C240, C280, E300, and SLK230 models with the specified brake configurations, including C230 applications without the Sport Package and certain single-piston front caliper setups. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition before completing brake service.
For fitment confirmation, use the vehicle notes exactly as listed: 2006-2007 Mercedes-Benz C230 front without Sport Package; 2004-2005 Mercedes-Benz C230 front single piston front caliper; 2001-2005 Mercedes-Benz C240 front; 1998-2004 Mercedes-Benz SLK230 front; 1996-2000 Mercedes-Benz C280 front; and 1996-1997 Mercedes-Benz E300 front.
Quality Assurance
Centric manufactures brake components for OE-style service applications, and the GCX Elemental Protection line is built around coated rotor construction for improved surface protection in demanding driving conditions. Part number 320.35057F is engineered to match the listed Mercedes-Benz front brake fitments and dimensional requirements.
