Centric 320.35062H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.35062H, is a front vented rotor built for OE-style braking performance and corrosion resistance. It uses a fully coated finish on non-mating surfaces and a high-carbon rotor metallurgy to support consistent braking on select Mercedes-Benz applications.
Compatible With 2003-2006 Mercedes-Benz E500 and 2004-2006 Mercedes-Benz SL500 front brake applications, this rotor is sized for a 312 mm front disc setup and is engineered to match the original vehicle profile. The Centric 320.35062H is also listed for 2006 Mercedes-Benz E350 front use with the noted chassis and package restrictions.
Key Features
- Part number 320.35062H front disc brake rotor
- Fully coated disc finish and coated hat for added rust and corrosion protection
- High-carbon rotor construction for OE-matched metallurgy
- Vented rotor design with curved vane style
- Smooth surface type for consistent pad contact
- 5-lug pattern with 112 mm bolt circle diameter
- 312 mm outside diameter and 28 mm nominal thickness
Centric GCX Rotor Line Details
Centric’s GCX Elemental Protection rotor line is application-specific, with coating patterns and metallurgy selected to align with the brake pad friction type and the vehicle’s original equipment profile. The RS200-style coating on non-mating surfaces helps protect exposed areas from rust while maintaining the braking surfaces needed for proper pad engagement. For buyers searching for a Mercedes-Benz E500 front brake rotor or a Mercedes-Benz SL500 front rotor, the GCX line is built to deliver OE-level fit and finish.
Detailed Description
The Centric 320.35062H is a front disc brake rotor designed for select Mercedes-Benz E500, SL500, and E350 models. It measures 12.283 inches in outside diameter, 2.543 inches in overall height, and 1.102 inches in nominal thickness, with a 2.638-inch center hole and floating disc mounting. The vented construction and curved vanes support heat management during repeated stops, while the fully coated finish helps preserve the rotor’s appearance and resist corrosion on exposed surfaces.
This rotor is a direct-fit choice for drivers replacing worn front brake rotors on 2003-2006 Mercedes-Benz E500, 2004-2006 Mercedes-Benz SL500, and 2006 Mercedes-Benz E350 vehicles within the listed chassis and equipment notes. If you are searching for a Centric GCX front rotor for Mercedes-Benz E500 or a coated front brake rotor for Mercedes-Benz SL500, part number 320.35062H matches the specified application data.
What This Rotor Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from heat-related rotor fatigue
- Uneven pad contact from worn or scored front rotors
- Replacement needs for a 312 mm front disc brake setup
Installation Notes and Tips
Verify the vehicle’s front brake configuration before ordering, especially for 2006 Mercedes-Benz E350 models with the chassis cutoff and sport package exclusion noted in the fitment data. Confirm rotor dimensions, bolt pattern, and center bore against the original part before installation. New brake pads and proper rotor break-in procedures help support even pad transfer and stable braking performance.
Fits 2003 Mercedes-Benz E500, front. Fits 2004-2005 Mercedes-Benz E500, front. Fits 2004 Mercedes-Benz SL500, front, from chassis F063165. Fits 2005-2006 Mercedes-Benz SL500, front. Fits 2006 Mercedes-Benz E500, front. Fits 2006 Mercedes-Benz E350, front, to chassis A870950 and except Sport Pkg.
Quality Assurance
Centric designs the GCX rotor line to align with OE performance targets and vehicle-specific metallurgy requirements. The application-specific coating pattern and high-carbon construction are intended to support long-term corrosion protection and consistent fitment on the listed Mercedes-Benz front brake applications.
Centric 320.35062H Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.35062H, is a front vented rotor built for OE-style braking performance and corrosion resistance. It uses a fully coated finish on non-mating surfaces and a high-carbon rotor metallurgy to support consistent braking on select Mercedes-Benz applications.
Compatible With 2003-2006 Mercedes-Benz E500 and 2004-2006 Mercedes-Benz SL500 front brake applications, this rotor is sized for a 312 mm front disc setup and is engineered to match the original vehicle profile. The Centric 320.35062H is also listed for 2006 Mercedes-Benz E350 front use with the noted chassis and package restrictions.
Key Features
- Part number 320.35062H front disc brake rotor
- Fully coated disc finish and coated hat for added rust and corrosion protection
- High-carbon rotor construction for OE-matched metallurgy
- Vented rotor design with curved vane style
- Smooth surface type for consistent pad contact
- 5-lug pattern with 112 mm bolt circle diameter
- 312 mm outside diameter and 28 mm nominal thickness
Centric GCX Rotor Line Details
Centric’s GCX Elemental Protection rotor line is application-specific, with coating patterns and metallurgy selected to align with the brake pad friction type and the vehicle’s original equipment profile. The RS200-style coating on non-mating surfaces helps protect exposed areas from rust while maintaining the braking surfaces needed for proper pad engagement. For buyers searching for a Mercedes-Benz E500 front brake rotor or a Mercedes-Benz SL500 front rotor, the GCX line is built to deliver OE-level fit and finish.
Detailed Description
The Centric 320.35062H is a front disc brake rotor designed for select Mercedes-Benz E500, SL500, and E350 models. It measures 12.283 inches in outside diameter, 2.543 inches in overall height, and 1.102 inches in nominal thickness, with a 2.638-inch center hole and floating disc mounting. The vented construction and curved vanes support heat management during repeated stops, while the fully coated finish helps preserve the rotor’s appearance and resist corrosion on exposed surfaces.
This rotor is a direct-fit choice for drivers replacing worn front brake rotors on 2003-2006 Mercedes-Benz E500, 2004-2006 Mercedes-Benz SL500, and 2006 Mercedes-Benz E350 vehicles within the listed chassis and equipment notes. If you are searching for a Centric GCX front rotor for Mercedes-Benz E500 or a coated front brake rotor for Mercedes-Benz SL500, part number 320.35062H matches the specified application data.
What This Rotor Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from heat-related rotor fatigue
- Uneven pad contact from worn or scored front rotors
- Replacement needs for a 312 mm front disc brake setup
Installation Notes and Tips
Verify the vehicle’s front brake configuration before ordering, especially for 2006 Mercedes-Benz E350 models with the chassis cutoff and sport package exclusion noted in the fitment data. Confirm rotor dimensions, bolt pattern, and center bore against the original part before installation. New brake pads and proper rotor break-in procedures help support even pad transfer and stable braking performance.
Fits 2003 Mercedes-Benz E500, front. Fits 2004-2005 Mercedes-Benz E500, front. Fits 2004 Mercedes-Benz SL500, front, from chassis F063165. Fits 2005-2006 Mercedes-Benz SL500, front. Fits 2006 Mercedes-Benz E500, front. Fits 2006 Mercedes-Benz E350, front, to chassis A870950 and except Sport Pkg.
Quality Assurance
Centric designs the GCX rotor line to align with OE performance targets and vehicle-specific metallurgy requirements. The application-specific coating pattern and high-carbon construction are intended to support long-term corrosion protection and consistent fitment on the listed Mercedes-Benz front brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.35062H, is a front vented rotor built for OE-style braking performance and corrosion resistance. It uses a fully coated finish on non-mating surfaces and a high-carbon rotor metallurgy to support consistent braking on select Mercedes-Benz applications.
Compatible With 2003-2006 Mercedes-Benz E500 and 2004-2006 Mercedes-Benz SL500 front brake applications, this rotor is sized for a 312 mm front disc setup and is engineered to match the original vehicle profile. The Centric 320.35062H is also listed for 2006 Mercedes-Benz E350 front use with the noted chassis and package restrictions.
Key Features
- Part number 320.35062H front disc brake rotor
- Fully coated disc finish and coated hat for added rust and corrosion protection
- High-carbon rotor construction for OE-matched metallurgy
- Vented rotor design with curved vane style
- Smooth surface type for consistent pad contact
- 5-lug pattern with 112 mm bolt circle diameter
- 312 mm outside diameter and 28 mm nominal thickness
Centric GCX Rotor Line Details
Centric’s GCX Elemental Protection rotor line is application-specific, with coating patterns and metallurgy selected to align with the brake pad friction type and the vehicle’s original equipment profile. The RS200-style coating on non-mating surfaces helps protect exposed areas from rust while maintaining the braking surfaces needed for proper pad engagement. For buyers searching for a Mercedes-Benz E500 front brake rotor or a Mercedes-Benz SL500 front rotor, the GCX line is built to deliver OE-level fit and finish.
Detailed Description
The Centric 320.35062H is a front disc brake rotor designed for select Mercedes-Benz E500, SL500, and E350 models. It measures 12.283 inches in outside diameter, 2.543 inches in overall height, and 1.102 inches in nominal thickness, with a 2.638-inch center hole and floating disc mounting. The vented construction and curved vanes support heat management during repeated stops, while the fully coated finish helps preserve the rotor’s appearance and resist corrosion on exposed surfaces.
This rotor is a direct-fit choice for drivers replacing worn front brake rotors on 2003-2006 Mercedes-Benz E500, 2004-2006 Mercedes-Benz SL500, and 2006 Mercedes-Benz E350 vehicles within the listed chassis and equipment notes. If you are searching for a Centric GCX front rotor for Mercedes-Benz E500 or a coated front brake rotor for Mercedes-Benz SL500, part number 320.35062H matches the specified application data.
What This Rotor Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from heat-related rotor fatigue
- Uneven pad contact from worn or scored front rotors
- Replacement needs for a 312 mm front disc brake setup
Installation Notes and Tips
Verify the vehicle’s front brake configuration before ordering, especially for 2006 Mercedes-Benz E350 models with the chassis cutoff and sport package exclusion noted in the fitment data. Confirm rotor dimensions, bolt pattern, and center bore against the original part before installation. New brake pads and proper rotor break-in procedures help support even pad transfer and stable braking performance.
Fits 2003 Mercedes-Benz E500, front. Fits 2004-2005 Mercedes-Benz E500, front. Fits 2004 Mercedes-Benz SL500, front, from chassis F063165. Fits 2005-2006 Mercedes-Benz SL500, front. Fits 2006 Mercedes-Benz E500, front. Fits 2006 Mercedes-Benz E350, front, to chassis A870950 and except Sport Pkg.
Quality Assurance
Centric designs the GCX rotor line to align with OE performance targets and vehicle-specific metallurgy requirements. The application-specific coating pattern and high-carbon construction are intended to support long-term corrosion protection and consistent fitment on the listed Mercedes-Benz front brake applications.
