Centric 320.35109F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for front brake service on select Mercedes-Benz applications, including C250, C300, C280, C200, C180, and E200 models. Part number 320.35109F combines OE-style fitment with a fully coated finish to help resist rust on exposed surfaces.
For drivers searching for a front brake rotor for Mercedes-Benz C250 or a 295mm front disc rotor for Mercedes-Benz C300, this GCX rotor is engineered to match the vehicle’s original metallurgy and braking profile.
Key Features
- Part number 320.35109F
- Fully coated disc finish with coated hat for added corrosion protection
- Vented rotor design with smooth surface type
- Curved vane style for heat management
- Application-specific coating pattern matched to brake pad friction type
- OE-matched metallurgy using enhanced carbon or high carbon alloy formulations
- Front axle fitment for select Mercedes-Benz models
Product Line Details
Centric’s GCX Elemental Protection line focuses on rotors that match original equipment performance while adding full-surface protection on non-mating areas. The GCX FC version uses Centric’s RS200 finish to help maintain appearance and reduce corrosion over time, making it a practical choice for daily-driven Mercedes-Benz brake repair.
Detailed Description
Centric 320.35109F is a vented front disc brake rotor with an 11.614-inch outside diameter, 2.539-inch overall height, 2.638-inch center hole diameter, and a 5-lug, 112 mm bolt circle. It also features a floating disc mounting design, 1 mounting hole, and a curved vane layout. The rotor is fully coated on non-mating surfaces and uses a coated hat finish to support long-term corrosion resistance.
This rotor is a direct-fit option for select Mercedes-Benz front brake applications, including 2016 Mercedes-Benz C250, 2012-2016 Mercedes-Benz E200, 2010-2015 Mercedes-Benz C250, 2012-2015 Mercedes-Benz C250, 2012 Mercedes-Benz C180, 2012 Mercedes-Benz C200, 2012 Mercedes-Benz C300, 2008-2011 Mercedes-Benz C300, and 2008-2009 Mercedes-Benz C280. It is a strong match for shoppers looking for a Mercedes-Benz C300 front brake rotor 295mm or a Centric GCX rotor for Mercedes-Benz C250 front service.
Common Problems This Rotor Helps Address
- Rust buildup on exposed rotor surfaces
- Brake pulsation caused by worn or below-spec rotors
- Noisy braking from uneven rotor wear
- Reduced braking consistency from heat-related rotor fatigue
- Fitment issues when replacing an OE-style front rotor on select Mercedes-Benz models
Installation Notes and Tips
Verify rotor diameter, hat height, center bore, and bolt pattern before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. Inspect pads, calipers, and hub surfaces during brake service to help ensure even contact and proper rotor seating. For best results, follow the vehicle manufacturer’s brake bedding procedure after installation.
Quality Assurance
Centric designs GCX rotors to align with OE performance targets and vehicle-specific metallurgy requirements. The brand’s application-specific coating pattern and corrosion-resistant finish are intended to support consistent brake service life and a clean appearance over time.
Centric 320.35109F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for front brake service on select Mercedes-Benz applications, including C250, C300, C280, C200, C180, and E200 models. Part number 320.35109F combines OE-style fitment with a fully coated finish to help resist rust on exposed surfaces.
For drivers searching for a front brake rotor for Mercedes-Benz C250 or a 295mm front disc rotor for Mercedes-Benz C300, this GCX rotor is engineered to match the vehicle’s original metallurgy and braking profile.
Key Features
- Part number 320.35109F
- Fully coated disc finish with coated hat for added corrosion protection
- Vented rotor design with smooth surface type
- Curved vane style for heat management
- Application-specific coating pattern matched to brake pad friction type
- OE-matched metallurgy using enhanced carbon or high carbon alloy formulations
- Front axle fitment for select Mercedes-Benz models
Product Line Details
Centric’s GCX Elemental Protection line focuses on rotors that match original equipment performance while adding full-surface protection on non-mating areas. The GCX FC version uses Centric’s RS200 finish to help maintain appearance and reduce corrosion over time, making it a practical choice for daily-driven Mercedes-Benz brake repair.
Detailed Description
Centric 320.35109F is a vented front disc brake rotor with an 11.614-inch outside diameter, 2.539-inch overall height, 2.638-inch center hole diameter, and a 5-lug, 112 mm bolt circle. It also features a floating disc mounting design, 1 mounting hole, and a curved vane layout. The rotor is fully coated on non-mating surfaces and uses a coated hat finish to support long-term corrosion resistance.
This rotor is a direct-fit option for select Mercedes-Benz front brake applications, including 2016 Mercedes-Benz C250, 2012-2016 Mercedes-Benz E200, 2010-2015 Mercedes-Benz C250, 2012-2015 Mercedes-Benz C250, 2012 Mercedes-Benz C180, 2012 Mercedes-Benz C200, 2012 Mercedes-Benz C300, 2008-2011 Mercedes-Benz C300, and 2008-2009 Mercedes-Benz C280. It is a strong match for shoppers looking for a Mercedes-Benz C300 front brake rotor 295mm or a Centric GCX rotor for Mercedes-Benz C250 front service.
Common Problems This Rotor Helps Address
- Rust buildup on exposed rotor surfaces
- Brake pulsation caused by worn or below-spec rotors
- Noisy braking from uneven rotor wear
- Reduced braking consistency from heat-related rotor fatigue
- Fitment issues when replacing an OE-style front rotor on select Mercedes-Benz models
Installation Notes and Tips
Verify rotor diameter, hat height, center bore, and bolt pattern before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. Inspect pads, calipers, and hub surfaces during brake service to help ensure even contact and proper rotor seating. For best results, follow the vehicle manufacturer’s brake bedding procedure after installation.
Quality Assurance
Centric designs GCX rotors to align with OE performance targets and vehicle-specific metallurgy requirements. The brand’s application-specific coating pattern and corrosion-resistant finish are intended to support consistent brake service life and a clean appearance over time.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor is built for front brake service on select Mercedes-Benz applications, including C250, C300, C280, C200, C180, and E200 models. Part number 320.35109F combines OE-style fitment with a fully coated finish to help resist rust on exposed surfaces.
For drivers searching for a front brake rotor for Mercedes-Benz C250 or a 295mm front disc rotor for Mercedes-Benz C300, this GCX rotor is engineered to match the vehicle’s original metallurgy and braking profile.
Key Features
- Part number 320.35109F
- Fully coated disc finish with coated hat for added corrosion protection
- Vented rotor design with smooth surface type
- Curved vane style for heat management
- Application-specific coating pattern matched to brake pad friction type
- OE-matched metallurgy using enhanced carbon or high carbon alloy formulations
- Front axle fitment for select Mercedes-Benz models
Product Line Details
Centric’s GCX Elemental Protection line focuses on rotors that match original equipment performance while adding full-surface protection on non-mating areas. The GCX FC version uses Centric’s RS200 finish to help maintain appearance and reduce corrosion over time, making it a practical choice for daily-driven Mercedes-Benz brake repair.
Detailed Description
Centric 320.35109F is a vented front disc brake rotor with an 11.614-inch outside diameter, 2.539-inch overall height, 2.638-inch center hole diameter, and a 5-lug, 112 mm bolt circle. It also features a floating disc mounting design, 1 mounting hole, and a curved vane layout. The rotor is fully coated on non-mating surfaces and uses a coated hat finish to support long-term corrosion resistance.
This rotor is a direct-fit option for select Mercedes-Benz front brake applications, including 2016 Mercedes-Benz C250, 2012-2016 Mercedes-Benz E200, 2010-2015 Mercedes-Benz C250, 2012-2015 Mercedes-Benz C250, 2012 Mercedes-Benz C180, 2012 Mercedes-Benz C200, 2012 Mercedes-Benz C300, 2008-2011 Mercedes-Benz C300, and 2008-2009 Mercedes-Benz C280. It is a strong match for shoppers looking for a Mercedes-Benz C300 front brake rotor 295mm or a Centric GCX rotor for Mercedes-Benz C250 front service.
Common Problems This Rotor Helps Address
- Rust buildup on exposed rotor surfaces
- Brake pulsation caused by worn or below-spec rotors
- Noisy braking from uneven rotor wear
- Reduced braking consistency from heat-related rotor fatigue
- Fitment issues when replacing an OE-style front rotor on select Mercedes-Benz models
Installation Notes and Tips
Verify rotor diameter, hat height, center bore, and bolt pattern before installation. This rotor is for front position use only and does not include ABS tone ring or bearings. Inspect pads, calipers, and hub surfaces during brake service to help ensure even contact and proper rotor seating. For best results, follow the vehicle manufacturer’s brake bedding procedure after installation.
Quality Assurance
Centric designs GCX rotors to align with OE performance targets and vehicle-specific metallurgy requirements. The brand’s application-specific coating pattern and corrosion-resistant finish are intended to support consistent brake service life and a clean appearance over time.
