Centric 320.35169H Disc Brake Rotor - Rear
Centric GCX Rear Rotor for Metris
Centric GCX Elemental Protection Disc Brake Rotor 320.35169H is built for rear brake service on the 2016-2022 Mercedes-Benz Metris. It combines a fully coated finish with high-carbon metallurgy to support OE-style braking performance while helping resist rust and corrosion on exposed surfaces.
For Mercedes-Benz Metris rear brake repair, this rotor is engineered to match the vehicle’s original fit and material profile. The Centric GCX line uses application-specific coating patterns and rotor metallurgy to align with brake pad friction needs and OEM-style performance targets.
Key Features
- Part number 320.35169H
- Fits 2016-2022 Mercedes-Benz Metris, rear
- Fully coated disc finish with coated hat surface
- High-carbon rotor construction for OE-style metallurgy
- Smooth solid rotor design
- Outside diameter: 300 mm (11.811 in)
- Nominal thickness: 12.000 mm (0.472 in)
- Discard thickness: 9.000 mm (0.354 in)
- 5-lug mounting pattern with 112 mm bolt circle
- Center hole diameter: 67.000 mm
Product Details
The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating, High Carbon Content line is designed around vehicle-specific rotor metallurgy and coating placement. On this Mercedes-Benz Metris rear application, the rotor features Centric’s RS200 coating on non-mating surfaces to help protect against corrosion while maintaining the friction surface needed for braking performance. The smooth, solid rotor profile and high-carbon alloy construction support consistent operation in everyday driving and brake service replacement. Part number 320.35169H is a direct-fit rear rotor choice for 2016-2022 Mercedes-Benz Metris models.
Common Problems This Rotor Can Address
- Rear rotor rust on exposed surfaces
- Brake pulsation caused by worn rotor thickness
- Uneven braking feel from rotor wear
- Corrosion buildup on the hat and non-mating surfaces
- OE rotor replacement needs on Mercedes-Benz Metris rear brake service
Installation Notes and Tips
Verify rotor dimensions, hub condition, and brake pad wear before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Because this is a rear rotor for the Mercedes-Benz Metris, confirm the vehicle’s rear brake configuration and compare the old rotor to the listed dimensions before assembly. Part number 320.35169H should be matched to the confirmed rear fitment for 2016-2022 Mercedes-Benz Metris applications.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets and uses application-specific metallurgy and coating patterns to support consistent fit and corrosion protection. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Original: $51.62
-65%$51.62
$18.07Centric 320.35169H Disc Brake Rotor - Rear
Centric GCX Rear Rotor for Metris
Centric GCX Elemental Protection Disc Brake Rotor 320.35169H is built for rear brake service on the 2016-2022 Mercedes-Benz Metris. It combines a fully coated finish with high-carbon metallurgy to support OE-style braking performance while helping resist rust and corrosion on exposed surfaces.
For Mercedes-Benz Metris rear brake repair, this rotor is engineered to match the vehicle’s original fit and material profile. The Centric GCX line uses application-specific coating patterns and rotor metallurgy to align with brake pad friction needs and OEM-style performance targets.
Key Features
- Part number 320.35169H
- Fits 2016-2022 Mercedes-Benz Metris, rear
- Fully coated disc finish with coated hat surface
- High-carbon rotor construction for OE-style metallurgy
- Smooth solid rotor design
- Outside diameter: 300 mm (11.811 in)
- Nominal thickness: 12.000 mm (0.472 in)
- Discard thickness: 9.000 mm (0.354 in)
- 5-lug mounting pattern with 112 mm bolt circle
- Center hole diameter: 67.000 mm
Product Details
The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating, High Carbon Content line is designed around vehicle-specific rotor metallurgy and coating placement. On this Mercedes-Benz Metris rear application, the rotor features Centric’s RS200 coating on non-mating surfaces to help protect against corrosion while maintaining the friction surface needed for braking performance. The smooth, solid rotor profile and high-carbon alloy construction support consistent operation in everyday driving and brake service replacement. Part number 320.35169H is a direct-fit rear rotor choice for 2016-2022 Mercedes-Benz Metris models.
Common Problems This Rotor Can Address
- Rear rotor rust on exposed surfaces
- Brake pulsation caused by worn rotor thickness
- Uneven braking feel from rotor wear
- Corrosion buildup on the hat and non-mating surfaces
- OE rotor replacement needs on Mercedes-Benz Metris rear brake service
Installation Notes and Tips
Verify rotor dimensions, hub condition, and brake pad wear before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Because this is a rear rotor for the Mercedes-Benz Metris, confirm the vehicle’s rear brake configuration and compare the old rotor to the listed dimensions before assembly. Part number 320.35169H should be matched to the confirmed rear fitment for 2016-2022 Mercedes-Benz Metris applications.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets and uses application-specific metallurgy and coating patterns to support consistent fit and corrosion protection. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Rear Rotor for Metris
Centric GCX Elemental Protection Disc Brake Rotor 320.35169H is built for rear brake service on the 2016-2022 Mercedes-Benz Metris. It combines a fully coated finish with high-carbon metallurgy to support OE-style braking performance while helping resist rust and corrosion on exposed surfaces.
For Mercedes-Benz Metris rear brake repair, this rotor is engineered to match the vehicle’s original fit and material profile. The Centric GCX line uses application-specific coating patterns and rotor metallurgy to align with brake pad friction needs and OEM-style performance targets.
Key Features
- Part number 320.35169H
- Fits 2016-2022 Mercedes-Benz Metris, rear
- Fully coated disc finish with coated hat surface
- High-carbon rotor construction for OE-style metallurgy
- Smooth solid rotor design
- Outside diameter: 300 mm (11.811 in)
- Nominal thickness: 12.000 mm (0.472 in)
- Discard thickness: 9.000 mm (0.354 in)
- 5-lug mounting pattern with 112 mm bolt circle
- Center hole diameter: 67.000 mm
Product Details
The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating, High Carbon Content line is designed around vehicle-specific rotor metallurgy and coating placement. On this Mercedes-Benz Metris rear application, the rotor features Centric’s RS200 coating on non-mating surfaces to help protect against corrosion while maintaining the friction surface needed for braking performance. The smooth, solid rotor profile and high-carbon alloy construction support consistent operation in everyday driving and brake service replacement. Part number 320.35169H is a direct-fit rear rotor choice for 2016-2022 Mercedes-Benz Metris models.
Common Problems This Rotor Can Address
- Rear rotor rust on exposed surfaces
- Brake pulsation caused by worn rotor thickness
- Uneven braking feel from rotor wear
- Corrosion buildup on the hat and non-mating surfaces
- OE rotor replacement needs on Mercedes-Benz Metris rear brake service
Installation Notes and Tips
Verify rotor dimensions, hub condition, and brake pad wear before installation. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true. Because this is a rear rotor for the Mercedes-Benz Metris, confirm the vehicle’s rear brake configuration and compare the old rotor to the listed dimensions before assembly. Part number 320.35169H should be matched to the confirmed rear fitment for 2016-2022 Mercedes-Benz Metris applications.
Quality Assurance
Centric designs the GCX rotor line to match OE performance targets and uses application-specific metallurgy and coating patterns to support consistent fit and corrosion protection. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
