Centric 320.40032F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Prelude
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.40032F, is a front vented rotor built for 1992-1996 Honda Prelude applications. It combines a fully coated disc finish with a coated hat to help protect exposed metal surfaces while maintaining a smooth braking surface.
For drivers searching for a 1992 Honda Prelude front brake rotor, a 1993-1996 Honda Prelude front disc brake rotor, or a Centric 320.40032F replacement rotor, this part is built around the listed OE-style dimensions and fitment.
Key Features
- Fits 1992-1996 Honda Prelude, front
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.40032F
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vanes
- Smooth surface type for consistent pad contact
- Outside diameter: 260.000 mm (10.236 in)
- Nominal thickness: 23.000 mm (0.906 in)
- Discard thickness: 21.000 mm (0.827 in)
- 4-lug pattern with 114.300 mm bolt circle
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection across the rotor surfaces that are most exposed during service. On this 320.40032F rotor, the fully coated disc finish and coated hat finish help preserve the rotor’s appearance and surface integrity, while the vented construction supports heat management during repeated braking. The floating disc mounting, 64.100 mm center hole diameter, and 4-hole mounting pattern align with the specified Honda Prelude front brake application.
Use this rotor when replacing worn front brake rotors on a Honda Prelude and when you need a direct-fit replacement identified as Centric 320.40032F. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Reduced braking performance from worn front rotors
- Surface corrosion on exposed rotor areas
- Noise or vibration related to uneven rotor surfaces
- Service replacement for a damaged or out-of-spec front rotor
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and wheel clearance before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. After installation, follow the brake pad manufacturer’s bedding procedure to help establish even pad transfer on the new rotor.
Quality Assurance
Centric GCX Elemental Protection rotors are built with coated surfaces and OE-style dimensional specifications for service replacement use. Part number 320.40032F is listed for 1992-1996 Honda Prelude front applications.
Centric 320.40032F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Prelude
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.40032F, is a front vented rotor built for 1992-1996 Honda Prelude applications. It combines a fully coated disc finish with a coated hat to help protect exposed metal surfaces while maintaining a smooth braking surface.
For drivers searching for a 1992 Honda Prelude front brake rotor, a 1993-1996 Honda Prelude front disc brake rotor, or a Centric 320.40032F replacement rotor, this part is built around the listed OE-style dimensions and fitment.
Key Features
- Fits 1992-1996 Honda Prelude, front
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.40032F
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vanes
- Smooth surface type for consistent pad contact
- Outside diameter: 260.000 mm (10.236 in)
- Nominal thickness: 23.000 mm (0.906 in)
- Discard thickness: 21.000 mm (0.827 in)
- 4-lug pattern with 114.300 mm bolt circle
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection across the rotor surfaces that are most exposed during service. On this 320.40032F rotor, the fully coated disc finish and coated hat finish help preserve the rotor’s appearance and surface integrity, while the vented construction supports heat management during repeated braking. The floating disc mounting, 64.100 mm center hole diameter, and 4-hole mounting pattern align with the specified Honda Prelude front brake application.
Use this rotor when replacing worn front brake rotors on a Honda Prelude and when you need a direct-fit replacement identified as Centric 320.40032F. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Reduced braking performance from worn front rotors
- Surface corrosion on exposed rotor areas
- Noise or vibration related to uneven rotor surfaces
- Service replacement for a damaged or out-of-spec front rotor
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and wheel clearance before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. After installation, follow the brake pad manufacturer’s bedding procedure to help establish even pad transfer on the new rotor.
Quality Assurance
Centric GCX Elemental Protection rotors are built with coated surfaces and OE-style dimensional specifications for service replacement use. Part number 320.40032F is listed for 1992-1996 Honda Prelude front applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for Prelude
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.40032F, is a front vented rotor built for 1992-1996 Honda Prelude applications. It combines a fully coated disc finish with a coated hat to help protect exposed metal surfaces while maintaining a smooth braking surface.
For drivers searching for a 1992 Honda Prelude front brake rotor, a 1993-1996 Honda Prelude front disc brake rotor, or a Centric 320.40032F replacement rotor, this part is built around the listed OE-style dimensions and fitment.
Key Features
- Fits 1992-1996 Honda Prelude, front
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.40032F
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vanes
- Smooth surface type for consistent pad contact
- Outside diameter: 260.000 mm (10.236 in)
- Nominal thickness: 23.000 mm (0.906 in)
- Discard thickness: 21.000 mm (0.827 in)
- 4-lug pattern with 114.300 mm bolt circle
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection across the rotor surfaces that are most exposed during service. On this 320.40032F rotor, the fully coated disc finish and coated hat finish help preserve the rotor’s appearance and surface integrity, while the vented construction supports heat management during repeated braking. The floating disc mounting, 64.100 mm center hole diameter, and 4-hole mounting pattern align with the specified Honda Prelude front brake application.
Use this rotor when replacing worn front brake rotors on a Honda Prelude and when you need a direct-fit replacement identified as Centric 320.40032F. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation caused by rotor wear or thickness variation
- Reduced braking performance from worn front rotors
- Surface corrosion on exposed rotor areas
- Noise or vibration related to uneven rotor surfaces
- Service replacement for a damaged or out-of-spec front rotor
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and wheel clearance before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. After installation, follow the brake pad manufacturer’s bedding procedure to help establish even pad transfer on the new rotor.
Quality Assurance
Centric GCX Elemental Protection rotors are built with coated surfaces and OE-style dimensional specifications for service replacement use. Part number 320.40032F is listed for 1992-1996 Honda Prelude front applications.
