Centric 320.40059F Disc Brake Rotor - Rear
Rear Brake Rotor for 2002-2004 Honda Odyssey
Centric GCX Elemental Protection Disc Brake Rotors - Full Coating are built for rear brake service on the 2002-2004 Honda Odyssey. Part number 320.40059F features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping protect exposed metal surfaces from corrosion.
This Centric GCX rotor is a solid rear disc brake rotor with a 12.323-inch outside diameter, 0.433-inch nominal thickness, and 0.354-inch discard thickness. It uses a 5-lug pattern with a 4.500-inch bolt circle and a 2.528-inch center hole diameter. The floating / DIH disc mounting specification and 13.5 lb weight align with the OE-style rear brake rotor application for the Honda Odyssey.
Key Features
- Fits 2002-2004 Honda Odyssey, rear
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Part number 320.40059F
- Fully coated disc finish with coated hat for added surface protection
- Smooth, solid rotor design for rear brake applications
- 5-lug rotor with 4.500-inch bolt circle and 2.528-inch center hole
- Outside diameter: 12.323 inches; nominal thickness: 0.433 inches
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor surfaces for drivers who want a clean, service-ready brake component. On this rear Honda Odyssey application, the fully coated finish helps protect the rotor’s non-friction surfaces, while the smooth braking surface supports even pad contact. If you are replacing worn rear brake rotors on a 2002, 2003, or 2004 Odyssey, 320.40059F provides the correct fitment and dimensions for the listed vehicle application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Reasons for Replacement
- Rear brake pulsation or vibration during stopping
- Visible rotor corrosion on the hat or non-friction surfaces
- Brake noise caused by uneven rotor wear
- Reduced braking smoothness from rotor thickness loss
- Service replacement for a worn rear rotor on a Honda Odyssey
Installation Notes and Tips
Verify rear fitment before installation on the 2002-2004 Honda Odyssey and confirm rotor dimensions against the existing part. Inspect pads, caliper hardware, and hub surfaces for wear or contamination before installing the new rotor. Clean the rotor friction surface before service and follow the vehicle manufacturer’s brake bedding procedure after installation.
Quality Assurance
Centric GCX rotors are engineered as OE-style replacement brake components with coated surfaces for corrosion protection in everyday service. Part number 320.40059F is specified for the rear position on the listed Honda Odyssey applications and is built to the published rotor dimensions for accurate replacement fitment.
Centric 320.40059F Disc Brake Rotor - Rear
Rear Brake Rotor for 2002-2004 Honda Odyssey
Centric GCX Elemental Protection Disc Brake Rotors - Full Coating are built for rear brake service on the 2002-2004 Honda Odyssey. Part number 320.40059F features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping protect exposed metal surfaces from corrosion.
This Centric GCX rotor is a solid rear disc brake rotor with a 12.323-inch outside diameter, 0.433-inch nominal thickness, and 0.354-inch discard thickness. It uses a 5-lug pattern with a 4.500-inch bolt circle and a 2.528-inch center hole diameter. The floating / DIH disc mounting specification and 13.5 lb weight align with the OE-style rear brake rotor application for the Honda Odyssey.
Key Features
- Fits 2002-2004 Honda Odyssey, rear
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Part number 320.40059F
- Fully coated disc finish with coated hat for added surface protection
- Smooth, solid rotor design for rear brake applications
- 5-lug rotor with 4.500-inch bolt circle and 2.528-inch center hole
- Outside diameter: 12.323 inches; nominal thickness: 0.433 inches
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor surfaces for drivers who want a clean, service-ready brake component. On this rear Honda Odyssey application, the fully coated finish helps protect the rotor’s non-friction surfaces, while the smooth braking surface supports even pad contact. If you are replacing worn rear brake rotors on a 2002, 2003, or 2004 Odyssey, 320.40059F provides the correct fitment and dimensions for the listed vehicle application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Reasons for Replacement
- Rear brake pulsation or vibration during stopping
- Visible rotor corrosion on the hat or non-friction surfaces
- Brake noise caused by uneven rotor wear
- Reduced braking smoothness from rotor thickness loss
- Service replacement for a worn rear rotor on a Honda Odyssey
Installation Notes and Tips
Verify rear fitment before installation on the 2002-2004 Honda Odyssey and confirm rotor dimensions against the existing part. Inspect pads, caliper hardware, and hub surfaces for wear or contamination before installing the new rotor. Clean the rotor friction surface before service and follow the vehicle manufacturer’s brake bedding procedure after installation.
Quality Assurance
Centric GCX rotors are engineered as OE-style replacement brake components with coated surfaces for corrosion protection in everyday service. Part number 320.40059F is specified for the rear position on the listed Honda Odyssey applications and is built to the published rotor dimensions for accurate replacement fitment.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Rotor for 2002-2004 Honda Odyssey
Centric GCX Elemental Protection Disc Brake Rotors - Full Coating are built for rear brake service on the 2002-2004 Honda Odyssey. Part number 320.40059F features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping protect exposed metal surfaces from corrosion.
This Centric GCX rotor is a solid rear disc brake rotor with a 12.323-inch outside diameter, 0.433-inch nominal thickness, and 0.354-inch discard thickness. It uses a 5-lug pattern with a 4.500-inch bolt circle and a 2.528-inch center hole diameter. The floating / DIH disc mounting specification and 13.5 lb weight align with the OE-style rear brake rotor application for the Honda Odyssey.
Key Features
- Fits 2002-2004 Honda Odyssey, rear
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Part number 320.40059F
- Fully coated disc finish with coated hat for added surface protection
- Smooth, solid rotor design for rear brake applications
- 5-lug rotor with 4.500-inch bolt circle and 2.528-inch center hole
- Outside diameter: 12.323 inches; nominal thickness: 0.433 inches
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor surfaces for drivers who want a clean, service-ready brake component. On this rear Honda Odyssey application, the fully coated finish helps protect the rotor’s non-friction surfaces, while the smooth braking surface supports even pad contact. If you are replacing worn rear brake rotors on a 2002, 2003, or 2004 Odyssey, 320.40059F provides the correct fitment and dimensions for the listed vehicle application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Reasons for Replacement
- Rear brake pulsation or vibration during stopping
- Visible rotor corrosion on the hat or non-friction surfaces
- Brake noise caused by uneven rotor wear
- Reduced braking smoothness from rotor thickness loss
- Service replacement for a worn rear rotor on a Honda Odyssey
Installation Notes and Tips
Verify rear fitment before installation on the 2002-2004 Honda Odyssey and confirm rotor dimensions against the existing part. Inspect pads, caliper hardware, and hub surfaces for wear or contamination before installing the new rotor. Clean the rotor friction surface before service and follow the vehicle manufacturer’s brake bedding procedure after installation.
Quality Assurance
Centric GCX rotors are engineered as OE-style replacement brake components with coated surfaces for corrosion protection in everyday service. Part number 320.40059F is specified for the rear position on the listed Honda Odyssey applications and is built to the published rotor dimensions for accurate replacement fitment.
