Centric 320.42047F Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor for Nissan 300ZX
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42047F, is built for rear brake service on select Nissan 300ZX applications. It is a fully coated, vented rotor with a smooth surface and corrosion-resistant finish on non-mating areas for OE-style performance and long-term appearance.
For drivers searching for a rear brake rotor for 1989-1996 Nissan 300ZX or a Centric 320.42047F rear rotor replacement, this GCX rotor is engineered around vehicle-specific metallurgy and coating patterns to match the brake pad friction type.
Key Features
- Part number 320.42047F
- Fits rear brake applications on 1989-1996 Nissan 300ZX
- Fully coated disc finish with coated hat for rust and corrosion resistance
- Vented rotor design with smooth surface type
- Outside diameter: 11.693 in. / 297.0 mm
- Nominal thickness: 0.709 in. / 18.0 mm
- Discard thickness: 0.630 in. / 16.0 mm
- 5-lug pattern with 4.500 in. / 114.3 mm bolt circle
- Center hole diameter: 2.677 in. / 68.0 mm
- Straight vane style and floating/DIH disc mounting
Product Details
Centric’s GCX Elemental Protection line focuses on OE performance with added surface protection. The rotor uses application-specific coating patterns and Centric’s metallurgical formulations to align with the OEM-style brake environment for the Nissan 300ZX. The fully coated finish helps protect exposed surfaces from rust while the smooth braking surface supports consistent pad contact.
This part number 320.42047F is a rear disc brake rotor for 1989-1996 Nissan 300ZX models, including the 1989 Nissan 300ZX rear application noted for vehicles built from 2/89 onward. It is a direct-fit style rotor for buyers looking for a rear brake rotor replacement for Nissan 300ZX models with vented rear discs.
What This Rotor Helps Address
- Rear rotor wear that affects braking consistency
- Surface rust on exposed rotor areas
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking performance from thin or heat-cycled rotors
- Uneven pad contact on aging rear brake components
Installation Notes and Tips
Verify rear fitment by year and build date before ordering. This rotor is listed for 1989-1996 Nissan 300ZX rear applications, with a specific note for 1989 vehicles built from 2/89. Confirm rotor dimensions, bolt pattern, center bore, and vented design against the original part before installation. Brake pads should be inspected and replaced if wear or glazing is present to support proper rotor break-in.
Quality Assurance
Centric designs the GCX line to match OE performance targets while using corrosion-resistant coatings on non-mating surfaces. The brand’s application-specific coating pattern and OEM-matched metallurgy are intended to support consistent fit and finish across covered vehicle applications. This part cross-references no additional part numbers in the provided data.
Centric 320.42047F Disc Brake Rotor - Rear
Centric GCX Rear Brake Rotor for Nissan 300ZX
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42047F, is built for rear brake service on select Nissan 300ZX applications. It is a fully coated, vented rotor with a smooth surface and corrosion-resistant finish on non-mating areas for OE-style performance and long-term appearance.
For drivers searching for a rear brake rotor for 1989-1996 Nissan 300ZX or a Centric 320.42047F rear rotor replacement, this GCX rotor is engineered around vehicle-specific metallurgy and coating patterns to match the brake pad friction type.
Key Features
- Part number 320.42047F
- Fits rear brake applications on 1989-1996 Nissan 300ZX
- Fully coated disc finish with coated hat for rust and corrosion resistance
- Vented rotor design with smooth surface type
- Outside diameter: 11.693 in. / 297.0 mm
- Nominal thickness: 0.709 in. / 18.0 mm
- Discard thickness: 0.630 in. / 16.0 mm
- 5-lug pattern with 4.500 in. / 114.3 mm bolt circle
- Center hole diameter: 2.677 in. / 68.0 mm
- Straight vane style and floating/DIH disc mounting
Product Details
Centric’s GCX Elemental Protection line focuses on OE performance with added surface protection. The rotor uses application-specific coating patterns and Centric’s metallurgical formulations to align with the OEM-style brake environment for the Nissan 300ZX. The fully coated finish helps protect exposed surfaces from rust while the smooth braking surface supports consistent pad contact.
This part number 320.42047F is a rear disc brake rotor for 1989-1996 Nissan 300ZX models, including the 1989 Nissan 300ZX rear application noted for vehicles built from 2/89 onward. It is a direct-fit style rotor for buyers looking for a rear brake rotor replacement for Nissan 300ZX models with vented rear discs.
What This Rotor Helps Address
- Rear rotor wear that affects braking consistency
- Surface rust on exposed rotor areas
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking performance from thin or heat-cycled rotors
- Uneven pad contact on aging rear brake components
Installation Notes and Tips
Verify rear fitment by year and build date before ordering. This rotor is listed for 1989-1996 Nissan 300ZX rear applications, with a specific note for 1989 vehicles built from 2/89. Confirm rotor dimensions, bolt pattern, center bore, and vented design against the original part before installation. Brake pads should be inspected and replaced if wear or glazing is present to support proper rotor break-in.
Quality Assurance
Centric designs the GCX line to match OE performance targets while using corrosion-resistant coatings on non-mating surfaces. The brand’s application-specific coating pattern and OEM-matched metallurgy are intended to support consistent fit and finish across covered vehicle applications. This part cross-references no additional part numbers in the provided data.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Rear Brake Rotor for Nissan 300ZX
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42047F, is built for rear brake service on select Nissan 300ZX applications. It is a fully coated, vented rotor with a smooth surface and corrosion-resistant finish on non-mating areas for OE-style performance and long-term appearance.
For drivers searching for a rear brake rotor for 1989-1996 Nissan 300ZX or a Centric 320.42047F rear rotor replacement, this GCX rotor is engineered around vehicle-specific metallurgy and coating patterns to match the brake pad friction type.
Key Features
- Part number 320.42047F
- Fits rear brake applications on 1989-1996 Nissan 300ZX
- Fully coated disc finish with coated hat for rust and corrosion resistance
- Vented rotor design with smooth surface type
- Outside diameter: 11.693 in. / 297.0 mm
- Nominal thickness: 0.709 in. / 18.0 mm
- Discard thickness: 0.630 in. / 16.0 mm
- 5-lug pattern with 4.500 in. / 114.3 mm bolt circle
- Center hole diameter: 2.677 in. / 68.0 mm
- Straight vane style and floating/DIH disc mounting
Product Details
Centric’s GCX Elemental Protection line focuses on OE performance with added surface protection. The rotor uses application-specific coating patterns and Centric’s metallurgical formulations to align with the OEM-style brake environment for the Nissan 300ZX. The fully coated finish helps protect exposed surfaces from rust while the smooth braking surface supports consistent pad contact.
This part number 320.42047F is a rear disc brake rotor for 1989-1996 Nissan 300ZX models, including the 1989 Nissan 300ZX rear application noted for vehicles built from 2/89 onward. It is a direct-fit style rotor for buyers looking for a rear brake rotor replacement for Nissan 300ZX models with vented rear discs.
What This Rotor Helps Address
- Rear rotor wear that affects braking consistency
- Surface rust on exposed rotor areas
- Brake pulsation caused by worn or out-of-spec rotors
- Reduced braking performance from thin or heat-cycled rotors
- Uneven pad contact on aging rear brake components
Installation Notes and Tips
Verify rear fitment by year and build date before ordering. This rotor is listed for 1989-1996 Nissan 300ZX rear applications, with a specific note for 1989 vehicles built from 2/89. Confirm rotor dimensions, bolt pattern, center bore, and vented design against the original part before installation. Brake pads should be inspected and replaced if wear or glazing is present to support proper rotor break-in.
Quality Assurance
Centric designs the GCX line to match OE performance targets while using corrosion-resistant coatings on non-mating surfaces. The brand’s application-specific coating pattern and OEM-matched metallurgy are intended to support consistent fit and finish across covered vehicle applications. This part cross-references no additional part numbers in the provided data.
