Centric 320.42061F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42061F, is a front vented rotor built for specific Nissan applications. It features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping resist corrosion on exposed metal surfaces.
Fits 1999 Nissan Sentra, front, for models produced before December 1999. Fits 1998 Nissan Sentra, front. Fits 1995-1998 Nissan 200SX, front.
Key Features
- Part number 320.42061F for direct application lookup
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Fully coated disc finish with coated hat for added surface protection
- Vented rotor design with straight vane style
- Smooth friction surface
- Floating disc mounting design
- 4-lug pattern with 100 mm bolt circle
- Outside diameter: 246.7 mm (9.713 in.)
- Nominal thickness: 18.0 mm (0.709 in.); discard thickness: 16.0 mm (0.630 in.)
Product Details
The Centric GCX line focuses on elemental protection through full coating coverage, making this rotor a practical choice for front brake service on Nissan Sentra and Nissan 200SX models listed above. The vented construction and straight vane layout support heat management during repeated stops, while the smooth surface and precise dimensions help maintain proper rotor fitment and brake pad contact. Part number 320.42061F is specified for front axle use on the confirmed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Can Address
- Front brake pulsation caused by rotor wear or thickness variation
- Corrosion on exposed rotor surfaces and hat area
- Noise or uneven braking from worn friction surfaces
- Reduced braking consistency from heat buildup in a worn rotor
- Service replacement for a rotor that has reached discard thickness
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and center hole diameter before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. For the 1999 Nissan Sentra, confirm the vehicle was produced before December 1999 before ordering part number 320.42061F.
Quality Assurance
Centric GCX rotors are built with coated surfaces and application-specific dimensions to support accurate fitment on the listed Nissan models. Confirm all measurements and vehicle details against the application data before installation.
Centric 320.42061F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42061F, is a front vented rotor built for specific Nissan applications. It features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping resist corrosion on exposed metal surfaces.
Fits 1999 Nissan Sentra, front, for models produced before December 1999. Fits 1998 Nissan Sentra, front. Fits 1995-1998 Nissan 200SX, front.
Key Features
- Part number 320.42061F for direct application lookup
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Fully coated disc finish with coated hat for added surface protection
- Vented rotor design with straight vane style
- Smooth friction surface
- Floating disc mounting design
- 4-lug pattern with 100 mm bolt circle
- Outside diameter: 246.7 mm (9.713 in.)
- Nominal thickness: 18.0 mm (0.709 in.); discard thickness: 16.0 mm (0.630 in.)
Product Details
The Centric GCX line focuses on elemental protection through full coating coverage, making this rotor a practical choice for front brake service on Nissan Sentra and Nissan 200SX models listed above. The vented construction and straight vane layout support heat management during repeated stops, while the smooth surface and precise dimensions help maintain proper rotor fitment and brake pad contact. Part number 320.42061F is specified for front axle use on the confirmed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Can Address
- Front brake pulsation caused by rotor wear or thickness variation
- Corrosion on exposed rotor surfaces and hat area
- Noise or uneven braking from worn friction surfaces
- Reduced braking consistency from heat buildup in a worn rotor
- Service replacement for a rotor that has reached discard thickness
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and center hole diameter before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. For the 1999 Nissan Sentra, confirm the vehicle was produced before December 1999 before ordering part number 320.42061F.
Quality Assurance
Centric GCX rotors are built with coated surfaces and application-specific dimensions to support accurate fitment on the listed Nissan models. Confirm all measurements and vehicle details against the application data before installation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42061F, is a front vented rotor built for specific Nissan applications. It features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping resist corrosion on exposed metal surfaces.
Fits 1999 Nissan Sentra, front, for models produced before December 1999. Fits 1998 Nissan Sentra, front. Fits 1995-1998 Nissan 200SX, front.
Key Features
- Part number 320.42061F for direct application lookup
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Fully coated disc finish with coated hat for added surface protection
- Vented rotor design with straight vane style
- Smooth friction surface
- Floating disc mounting design
- 4-lug pattern with 100 mm bolt circle
- Outside diameter: 246.7 mm (9.713 in.)
- Nominal thickness: 18.0 mm (0.709 in.); discard thickness: 16.0 mm (0.630 in.)
Product Details
The Centric GCX line focuses on elemental protection through full coating coverage, making this rotor a practical choice for front brake service on Nissan Sentra and Nissan 200SX models listed above. The vented construction and straight vane layout support heat management during repeated stops, while the smooth surface and precise dimensions help maintain proper rotor fitment and brake pad contact. Part number 320.42061F is specified for front axle use on the confirmed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Can Address
- Front brake pulsation caused by rotor wear or thickness variation
- Corrosion on exposed rotor surfaces and hat area
- Noise or uneven braking from worn friction surfaces
- Reduced braking consistency from heat buildup in a worn rotor
- Service replacement for a rotor that has reached discard thickness
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and center hole diameter before installation. Clean the hub mounting surface thoroughly to reduce runout concerns, and inspect pads, calipers, and hardware condition during brake service. For the 1999 Nissan Sentra, confirm the vehicle was produced before December 1999 before ordering part number 320.42061F.
Quality Assurance
Centric GCX rotors are built with coated surfaces and application-specific dimensions to support accurate fitment on the listed Nissan models. Confirm all measurements and vehicle details against the application data before installation.
