Centric 320.42075F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42075F, is a front vented rotor built for select Nissan applications. It features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping resist corrosion on exposed metal surfaces.
Compatible With 2003-2005 Nissan Murano, 2004-2005 Nissan Maxima, and 2005 Nissan Altima front brake applications, this rotor is sized for direct-fit replacement use on the listed vehicles. The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line focuses on corrosion protection across the rotor surfaces, including the hat area, for a cleaner appearance and longer-lasting finish in everyday driving conditions.
Key Features
- Part number 320.42075F
- Front disc brake rotor for select Nissan models
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vane style
- Smooth surface type for brake pad contact
- 5-lug pattern with 114.3 mm bolt circle
- Outside diameter: 319.6 mm (12.583 in.)
- Nominal thickness: 28.0 mm (1.102 in.)
- Discard thickness: 26.0 mm (1.024 in.)
Product Line Details
Centric GCX Elemental Protection Disc Brake Rotors - Full Coating are built around corrosion-resistant surface treatment on both the disc and hat areas. That coating helps protect the rotor from environmental exposure before and after installation, making it a practical choice for drivers replacing worn front rotors on Nissan Altima, Nissan Maxima, or Nissan Murano models.
Detailed Description
This Centric front brake rotor uses a floating disc mounting design, a 68.0 mm center hole diameter, and a 114.3 mm bolt circle to match the listed fitments. The vented construction and straight vane layout support heat management during repeated stops, while the smooth braking surface provides a conventional pad contact area for service replacement. The rotor weighs 20.5 lb and measures 49.2 mm in overall height, with a 12.8 mm lug hole diameter.
This part cross-references no listed interchange numbers for the same application. For buyers searching by vehicle, this is a Centric 320.42075F front rotor for 2003-2005 Nissan Murano, 2004-2005 Nissan Maxima, and 2005 Nissan Altima front brake service.
What It Helps Address
- Front brake rotor wear and minimum-thickness replacement needs
- Brake pulsation caused by rotor surface deterioration
- Corrosion on exposed rotor and hat surfaces
- Uneven braking feel from worn or heat-affected rotors
- Service replacement for Nissan Altima, Maxima, and Murano front brake systems
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub fitment before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect brake pads and caliper hardware for wear before returning the vehicle to service. After installation, follow the vehicle manufacturer’s brake bedding procedure to help establish proper pad-to-rotor contact.
Quality Assurance
Centric GCX Elemental Protection rotors are manufactured to match the listed dimensions and fitment requirements for the specified Nissan front applications. Confirm vehicle year, model, and front position before ordering to ensure correct application.
Centric 320.42075F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42075F, is a front vented rotor built for select Nissan applications. It features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping resist corrosion on exposed metal surfaces.
Compatible With 2003-2005 Nissan Murano, 2004-2005 Nissan Maxima, and 2005 Nissan Altima front brake applications, this rotor is sized for direct-fit replacement use on the listed vehicles. The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line focuses on corrosion protection across the rotor surfaces, including the hat area, for a cleaner appearance and longer-lasting finish in everyday driving conditions.
Key Features
- Part number 320.42075F
- Front disc brake rotor for select Nissan models
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vane style
- Smooth surface type for brake pad contact
- 5-lug pattern with 114.3 mm bolt circle
- Outside diameter: 319.6 mm (12.583 in.)
- Nominal thickness: 28.0 mm (1.102 in.)
- Discard thickness: 26.0 mm (1.024 in.)
Product Line Details
Centric GCX Elemental Protection Disc Brake Rotors - Full Coating are built around corrosion-resistant surface treatment on both the disc and hat areas. That coating helps protect the rotor from environmental exposure before and after installation, making it a practical choice for drivers replacing worn front rotors on Nissan Altima, Nissan Maxima, or Nissan Murano models.
Detailed Description
This Centric front brake rotor uses a floating disc mounting design, a 68.0 mm center hole diameter, and a 114.3 mm bolt circle to match the listed fitments. The vented construction and straight vane layout support heat management during repeated stops, while the smooth braking surface provides a conventional pad contact area for service replacement. The rotor weighs 20.5 lb and measures 49.2 mm in overall height, with a 12.8 mm lug hole diameter.
This part cross-references no listed interchange numbers for the same application. For buyers searching by vehicle, this is a Centric 320.42075F front rotor for 2003-2005 Nissan Murano, 2004-2005 Nissan Maxima, and 2005 Nissan Altima front brake service.
What It Helps Address
- Front brake rotor wear and minimum-thickness replacement needs
- Brake pulsation caused by rotor surface deterioration
- Corrosion on exposed rotor and hat surfaces
- Uneven braking feel from worn or heat-affected rotors
- Service replacement for Nissan Altima, Maxima, and Murano front brake systems
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub fitment before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect brake pads and caliper hardware for wear before returning the vehicle to service. After installation, follow the vehicle manufacturer’s brake bedding procedure to help establish proper pad-to-rotor contact.
Quality Assurance
Centric GCX Elemental Protection rotors are manufactured to match the listed dimensions and fitment requirements for the specified Nissan front applications. Confirm vehicle year, model, and front position before ordering to ensure correct application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.42075F, is a front vented rotor built for select Nissan applications. It features a fully coated disc finish, coated hat, and smooth surface to support consistent braking performance while helping resist corrosion on exposed metal surfaces.
Compatible With 2003-2005 Nissan Murano, 2004-2005 Nissan Maxima, and 2005 Nissan Altima front brake applications, this rotor is sized for direct-fit replacement use on the listed vehicles. The Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line focuses on corrosion protection across the rotor surfaces, including the hat area, for a cleaner appearance and longer-lasting finish in everyday driving conditions.
Key Features
- Part number 320.42075F
- Front disc brake rotor for select Nissan models
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vane style
- Smooth surface type for brake pad contact
- 5-lug pattern with 114.3 mm bolt circle
- Outside diameter: 319.6 mm (12.583 in.)
- Nominal thickness: 28.0 mm (1.102 in.)
- Discard thickness: 26.0 mm (1.024 in.)
Product Line Details
Centric GCX Elemental Protection Disc Brake Rotors - Full Coating are built around corrosion-resistant surface treatment on both the disc and hat areas. That coating helps protect the rotor from environmental exposure before and after installation, making it a practical choice for drivers replacing worn front rotors on Nissan Altima, Nissan Maxima, or Nissan Murano models.
Detailed Description
This Centric front brake rotor uses a floating disc mounting design, a 68.0 mm center hole diameter, and a 114.3 mm bolt circle to match the listed fitments. The vented construction and straight vane layout support heat management during repeated stops, while the smooth braking surface provides a conventional pad contact area for service replacement. The rotor weighs 20.5 lb and measures 49.2 mm in overall height, with a 12.8 mm lug hole diameter.
This part cross-references no listed interchange numbers for the same application. For buyers searching by vehicle, this is a Centric 320.42075F front rotor for 2003-2005 Nissan Murano, 2004-2005 Nissan Maxima, and 2005 Nissan Altima front brake service.
What It Helps Address
- Front brake rotor wear and minimum-thickness replacement needs
- Brake pulsation caused by rotor surface deterioration
- Corrosion on exposed rotor and hat surfaces
- Uneven braking feel from worn or heat-affected rotors
- Service replacement for Nissan Altima, Maxima, and Murano front brake systems
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and hub fitment before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect brake pads and caliper hardware for wear before returning the vehicle to service. After installation, follow the vehicle manufacturer’s brake bedding procedure to help establish proper pad-to-rotor contact.
Quality Assurance
Centric GCX Elemental Protection rotors are manufactured to match the listed dimensions and fitment requirements for the specified Nissan front applications. Confirm vehicle year, model, and front position before ordering to ensure correct application.
