Centric 320.44112F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Toyota
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.44112F, is a fully coated front rotor built for select Toyota applications. It combines a vented, smooth-surface design with coated hat and disc finishes to help maintain consistent braking performance in everyday driving.
Key Features
- Part number 320.44112F
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Fully coated disc finish with coated hat finish
- Vented rotor with straight vane style
- Smooth surface type
- Outside diameter: 318.500 mm (12.539 in.)
- Nominal thickness: 21.800 mm (0.858 in.)
- Discard thickness: 20.000 mm (0.787 in.)
- Center hole diameter: 108.100 mm (4.256 in.)
- 5.500 in. bolt circle with 6 lug holes
- Floating disc mounting
- No ABS tone ring included
- No bearings included
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built with full coating coverage to protect the rotor surfaces and hat area from corrosion exposure. This front vented rotor measures 318.500 mm in outside diameter and uses a straight vane internal design for stable heat management during repeated stops. The smooth braking surface and precise dimensions support direct replacement service on the listed Toyota Tacoma and Toyota 4Runner front brake applications. Part number 320.44112F is a fitment-specific choice for drivers searching for a front brake rotor for 2004 Toyota Tacoma 6 lug VSC or a front rotor for 1995-2002 Toyota 4Runner with the specified caliper casting and 319 mm disc setup.
Vehicle Fitment
- Fits 2004 Toyota Tacoma, front; 6 Lug; VSC.
- Fits 1997-2002 Toyota 4Runner, front; Front Disc Brake Caliper Casting# S13WM fits 319mm Disc.
- Fits 1995-1996 Toyota 4Runner, front; 319mm Front Disc; Fr 11/95; Front Caliper Casting# S13WM.
Common Repair Uses
- Front brake pulsation caused by rotor wear or thickness loss
- Corrosion on the braking surface or hat area
- Brake noise related to uneven rotor finish
- Reduced braking consistency from heat cycling
- Service replacement for worn Toyota Tacoma or Toyota 4Runner front rotors
Installation Notes
Verify rotor diameter, center hole, bolt circle, and caliper casting before installation. This rotor is for front applications only and does not include ABS tone ring or bearings. Confirm the vehicle uses the listed 319 mm or 318.5 mm front disc specification where noted, and inspect pads, calipers, and hub surfaces during brake service. Part number 320.44112F should be matched to the exact Toyota Tacoma or Toyota 4Runner fitment shown above.
Quality Assurance
Centric GCX rotors are engineered as direct-fit brake service components with coated surfaces for added elemental protection. The fully coated finish and application-specific dimensions support consistent replacement quality for the listed Toyota front brake applications.
Centric 320.44112F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Toyota
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.44112F, is a fully coated front rotor built for select Toyota applications. It combines a vented, smooth-surface design with coated hat and disc finishes to help maintain consistent braking performance in everyday driving.
Key Features
- Part number 320.44112F
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Fully coated disc finish with coated hat finish
- Vented rotor with straight vane style
- Smooth surface type
- Outside diameter: 318.500 mm (12.539 in.)
- Nominal thickness: 21.800 mm (0.858 in.)
- Discard thickness: 20.000 mm (0.787 in.)
- Center hole diameter: 108.100 mm (4.256 in.)
- 5.500 in. bolt circle with 6 lug holes
- Floating disc mounting
- No ABS tone ring included
- No bearings included
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built with full coating coverage to protect the rotor surfaces and hat area from corrosion exposure. This front vented rotor measures 318.500 mm in outside diameter and uses a straight vane internal design for stable heat management during repeated stops. The smooth braking surface and precise dimensions support direct replacement service on the listed Toyota Tacoma and Toyota 4Runner front brake applications. Part number 320.44112F is a fitment-specific choice for drivers searching for a front brake rotor for 2004 Toyota Tacoma 6 lug VSC or a front rotor for 1995-2002 Toyota 4Runner with the specified caliper casting and 319 mm disc setup.
Vehicle Fitment
- Fits 2004 Toyota Tacoma, front; 6 Lug; VSC.
- Fits 1997-2002 Toyota 4Runner, front; Front Disc Brake Caliper Casting# S13WM fits 319mm Disc.
- Fits 1995-1996 Toyota 4Runner, front; 319mm Front Disc; Fr 11/95; Front Caliper Casting# S13WM.
Common Repair Uses
- Front brake pulsation caused by rotor wear or thickness loss
- Corrosion on the braking surface or hat area
- Brake noise related to uneven rotor finish
- Reduced braking consistency from heat cycling
- Service replacement for worn Toyota Tacoma or Toyota 4Runner front rotors
Installation Notes
Verify rotor diameter, center hole, bolt circle, and caliper casting before installation. This rotor is for front applications only and does not include ABS tone ring or bearings. Confirm the vehicle uses the listed 319 mm or 318.5 mm front disc specification where noted, and inspect pads, calipers, and hub surfaces during brake service. Part number 320.44112F should be matched to the exact Toyota Tacoma or Toyota 4Runner fitment shown above.
Quality Assurance
Centric GCX rotors are engineered as direct-fit brake service components with coated surfaces for added elemental protection. The fully coated finish and application-specific dimensions support consistent replacement quality for the listed Toyota front brake applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for Toyota
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.44112F, is a fully coated front rotor built for select Toyota applications. It combines a vented, smooth-surface design with coated hat and disc finishes to help maintain consistent braking performance in everyday driving.
Key Features
- Part number 320.44112F
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating
- Fully coated disc finish with coated hat finish
- Vented rotor with straight vane style
- Smooth surface type
- Outside diameter: 318.500 mm (12.539 in.)
- Nominal thickness: 21.800 mm (0.858 in.)
- Discard thickness: 20.000 mm (0.787 in.)
- Center hole diameter: 108.100 mm (4.256 in.)
- 5.500 in. bolt circle with 6 lug holes
- Floating disc mounting
- No ABS tone ring included
- No bearings included
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built with full coating coverage to protect the rotor surfaces and hat area from corrosion exposure. This front vented rotor measures 318.500 mm in outside diameter and uses a straight vane internal design for stable heat management during repeated stops. The smooth braking surface and precise dimensions support direct replacement service on the listed Toyota Tacoma and Toyota 4Runner front brake applications. Part number 320.44112F is a fitment-specific choice for drivers searching for a front brake rotor for 2004 Toyota Tacoma 6 lug VSC or a front rotor for 1995-2002 Toyota 4Runner with the specified caliper casting and 319 mm disc setup.
Vehicle Fitment
- Fits 2004 Toyota Tacoma, front; 6 Lug; VSC.
- Fits 1997-2002 Toyota 4Runner, front; Front Disc Brake Caliper Casting# S13WM fits 319mm Disc.
- Fits 1995-1996 Toyota 4Runner, front; 319mm Front Disc; Fr 11/95; Front Caliper Casting# S13WM.
Common Repair Uses
- Front brake pulsation caused by rotor wear or thickness loss
- Corrosion on the braking surface or hat area
- Brake noise related to uneven rotor finish
- Reduced braking consistency from heat cycling
- Service replacement for worn Toyota Tacoma or Toyota 4Runner front rotors
Installation Notes
Verify rotor diameter, center hole, bolt circle, and caliper casting before installation. This rotor is for front applications only and does not include ABS tone ring or bearings. Confirm the vehicle uses the listed 319 mm or 318.5 mm front disc specification where noted, and inspect pads, calipers, and hub surfaces during brake service. Part number 320.44112F should be matched to the exact Toyota Tacoma or Toyota 4Runner fitment shown above.
Quality Assurance
Centric GCX rotors are engineered as direct-fit brake service components with coated surfaces for added elemental protection. The fully coated finish and application-specific dimensions support consistent replacement quality for the listed Toyota front brake applications.
