Centric 320.46060F Disc Brake Rotor - Front or Rear Right
Centric GCX Rotor for Mitsubishi and Nissan
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.46060F, is a fully coated vented rotor built for select Mitsubishi Lancer, Mitsubishi Mirage, and Nissan Sentra applications. Its coated disc and hat surfaces help protect exposed metal areas, while the smooth braking surface supports consistent pad contact.
Key Features
- Fully coated disc finish with a coated hat for added corrosion resistance
- Vented rotor design with straight vanes
- Smooth surface type for even brake pad engagement
- Outside diameter: 256 mm (10.079 in.)
- Nominal thickness: 24.000 mm (0.945 in.)
- Discard thickness: 22.400 mm (0.882 in.)
- Center hole diameter: 64.000 mm (2.520 in.)
- 4-lug pattern with 100.000 mm bolt circle diameter
- Floating disc mounting and 2 miscellaneous holes
- ABS tone ring and bearings not included
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built for drivers who need a direct-fit replacement rotor with corrosion-resistant coating coverage on the disc and hat. Part number 320.46060F is a vented, smooth-surface rotor with straight vane construction, making it a practical choice for front brake service on 2002-2007 Mitsubishi Lancer and 2001-2002 Mitsubishi Mirage, as well as rear right service on 2000-2006 Nissan Sentra. It also fits 1998-2000 Mitsubishi Mirage front applications, including 14-inch wheel configurations noted for 1998 and 1999-2000 Mirage fitment.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Can Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Corrosion on exposed rotor areas from road moisture and salt
- Reduced braking consistency from rotor wear beyond discard thickness
- Noise or vibration related to rotor surface irregularity
- Fitment issues when replacing a worn OE-style rotor on supported Mitsubishi and Nissan models
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. This rotor is listed for front use on Mitsubishi Lancer and Mirage applications and rear right use on Nissan Sentra applications, so position matters during brake service. Inspect pads, caliper hardware, and hub surfaces at the same time to help ensure even bedding and proper brake performance. For 1998-2000 Mitsubishi Mirage applications, confirm the 14-inch wheel note before ordering.
Quality Assurance
Centric GCX Elemental Protection rotors are engineered with coated surfaces to help resist corrosion on the disc and hat areas while maintaining the specified braking dimensions for the listed applications. Part number 320.46060F is built to match the fitment and dimensional requirements shown for compatible Mitsubishi and Nissan brake service.
Original: $35.26
-65%$35.26
$12.34Centric 320.46060F Disc Brake Rotor - Front or Rear Right
Centric GCX Rotor for Mitsubishi and Nissan
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.46060F, is a fully coated vented rotor built for select Mitsubishi Lancer, Mitsubishi Mirage, and Nissan Sentra applications. Its coated disc and hat surfaces help protect exposed metal areas, while the smooth braking surface supports consistent pad contact.
Key Features
- Fully coated disc finish with a coated hat for added corrosion resistance
- Vented rotor design with straight vanes
- Smooth surface type for even brake pad engagement
- Outside diameter: 256 mm (10.079 in.)
- Nominal thickness: 24.000 mm (0.945 in.)
- Discard thickness: 22.400 mm (0.882 in.)
- Center hole diameter: 64.000 mm (2.520 in.)
- 4-lug pattern with 100.000 mm bolt circle diameter
- Floating disc mounting and 2 miscellaneous holes
- ABS tone ring and bearings not included
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built for drivers who need a direct-fit replacement rotor with corrosion-resistant coating coverage on the disc and hat. Part number 320.46060F is a vented, smooth-surface rotor with straight vane construction, making it a practical choice for front brake service on 2002-2007 Mitsubishi Lancer and 2001-2002 Mitsubishi Mirage, as well as rear right service on 2000-2006 Nissan Sentra. It also fits 1998-2000 Mitsubishi Mirage front applications, including 14-inch wheel configurations noted for 1998 and 1999-2000 Mirage fitment.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Can Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Corrosion on exposed rotor areas from road moisture and salt
- Reduced braking consistency from rotor wear beyond discard thickness
- Noise or vibration related to rotor surface irregularity
- Fitment issues when replacing a worn OE-style rotor on supported Mitsubishi and Nissan models
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. This rotor is listed for front use on Mitsubishi Lancer and Mirage applications and rear right use on Nissan Sentra applications, so position matters during brake service. Inspect pads, caliper hardware, and hub surfaces at the same time to help ensure even bedding and proper brake performance. For 1998-2000 Mitsubishi Mirage applications, confirm the 14-inch wheel note before ordering.
Quality Assurance
Centric GCX Elemental Protection rotors are engineered with coated surfaces to help resist corrosion on the disc and hat areas while maintaining the specified braking dimensions for the listed applications. Part number 320.46060F is built to match the fitment and dimensional requirements shown for compatible Mitsubishi and Nissan brake service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Rotor for Mitsubishi and Nissan
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.46060F, is a fully coated vented rotor built for select Mitsubishi Lancer, Mitsubishi Mirage, and Nissan Sentra applications. Its coated disc and hat surfaces help protect exposed metal areas, while the smooth braking surface supports consistent pad contact.
Key Features
- Fully coated disc finish with a coated hat for added corrosion resistance
- Vented rotor design with straight vanes
- Smooth surface type for even brake pad engagement
- Outside diameter: 256 mm (10.079 in.)
- Nominal thickness: 24.000 mm (0.945 in.)
- Discard thickness: 22.400 mm (0.882 in.)
- Center hole diameter: 64.000 mm (2.520 in.)
- 4-lug pattern with 100.000 mm bolt circle diameter
- Floating disc mounting and 2 miscellaneous holes
- ABS tone ring and bearings not included
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built for drivers who need a direct-fit replacement rotor with corrosion-resistant coating coverage on the disc and hat. Part number 320.46060F is a vented, smooth-surface rotor with straight vane construction, making it a practical choice for front brake service on 2002-2007 Mitsubishi Lancer and 2001-2002 Mitsubishi Mirage, as well as rear right service on 2000-2006 Nissan Sentra. It also fits 1998-2000 Mitsubishi Mirage front applications, including 14-inch wheel configurations noted for 1998 and 1999-2000 Mirage fitment.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Can Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Corrosion on exposed rotor areas from road moisture and salt
- Reduced braking consistency from rotor wear beyond discard thickness
- Noise or vibration related to rotor surface irregularity
- Fitment issues when replacing a worn OE-style rotor on supported Mitsubishi and Nissan models
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. This rotor is listed for front use on Mitsubishi Lancer and Mirage applications and rear right use on Nissan Sentra applications, so position matters during brake service. Inspect pads, caliper hardware, and hub surfaces at the same time to help ensure even bedding and proper brake performance. For 1998-2000 Mitsubishi Mirage applications, confirm the 14-inch wheel note before ordering.
Quality Assurance
Centric GCX Elemental Protection rotors are engineered with coated surfaces to help resist corrosion on the disc and hat areas while maintaining the specified braking dimensions for the listed applications. Part number 320.46060F is built to match the fitment and dimensional requirements shown for compatible Mitsubishi and Nissan brake service.
