Centric 320.48008F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Suzuki
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.48008F, is a front vented rotor built for select Suzuki applications. It combines a fully coated disc finish with a coated hat to help resist corrosion while maintaining a smooth braking surface.
Compatible with 1999-2005 Suzuki Grand Vitara front and 2002-2006 Suzuki XL-7 front, this rotor is sized for direct-fit service on vehicles using a 310 mm outside diameter and 5-lug, 5.500-inch bolt pattern. The Centric 320.48008F is a practical OE-style replacement for drivers looking to restore front brake performance and appearance.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.48008F
- Fully coated disc finish with coated hat finish for added corrosion resistance
- Vented rotor design with straight vane style
- Smooth surface type for consistent pad contact
- 310 mm outside diameter, 22 mm nominal thickness, 20 mm discard thickness
- Floating disc mounting with 5 lug holes and 2 miscellaneous holes
- Front position application for select Suzuki Grand Vitara and Suzuki XL-7 models
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection across the rotor surfaces that are exposed to the elements. On this rotor, the coated disc and coated hat help preserve the part’s finish, while the vented construction and straight vanes support heat management during repeated braking. The Centric 320.48008F is engineered for front brake service on 1999-2005 Suzuki Grand Vitara and 2002-2006 Suzuki XL-7 models, making it a direct replacement choice when the original rotor is worn, scored, or rusted.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Front brake pulsation caused by rotor wear or uneven surfaces
- Brake noise related to damaged or rusted rotor faces
- Reduced braking consistency from heat-affected rotor condition
- Visible corrosion on the rotor hat and outer surfaces
- Service replacement needs for Suzuki Grand Vitara and Suzuki XL-7 front brakes
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and wheel bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. After installation, follow the brake pad manufacturer’s bedding procedure to help establish even pad transfer on the new rotor surface.
Quality Assurance
Centric GCX rotors are built as coated replacement brake components for corrosion resistance and consistent service fitment. Confirm vehicle application by year, make, model, and front position before ordering the Centric 320.48008F.
Centric 320.48008F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Suzuki
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.48008F, is a front vented rotor built for select Suzuki applications. It combines a fully coated disc finish with a coated hat to help resist corrosion while maintaining a smooth braking surface.
Compatible with 1999-2005 Suzuki Grand Vitara front and 2002-2006 Suzuki XL-7 front, this rotor is sized for direct-fit service on vehicles using a 310 mm outside diameter and 5-lug, 5.500-inch bolt pattern. The Centric 320.48008F is a practical OE-style replacement for drivers looking to restore front brake performance and appearance.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.48008F
- Fully coated disc finish with coated hat finish for added corrosion resistance
- Vented rotor design with straight vane style
- Smooth surface type for consistent pad contact
- 310 mm outside diameter, 22 mm nominal thickness, 20 mm discard thickness
- Floating disc mounting with 5 lug holes and 2 miscellaneous holes
- Front position application for select Suzuki Grand Vitara and Suzuki XL-7 models
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection across the rotor surfaces that are exposed to the elements. On this rotor, the coated disc and coated hat help preserve the part’s finish, while the vented construction and straight vanes support heat management during repeated braking. The Centric 320.48008F is engineered for front brake service on 1999-2005 Suzuki Grand Vitara and 2002-2006 Suzuki XL-7 models, making it a direct replacement choice when the original rotor is worn, scored, or rusted.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Front brake pulsation caused by rotor wear or uneven surfaces
- Brake noise related to damaged or rusted rotor faces
- Reduced braking consistency from heat-affected rotor condition
- Visible corrosion on the rotor hat and outer surfaces
- Service replacement needs for Suzuki Grand Vitara and Suzuki XL-7 front brakes
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and wheel bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. After installation, follow the brake pad manufacturer’s bedding procedure to help establish even pad transfer on the new rotor surface.
Quality Assurance
Centric GCX rotors are built as coated replacement brake components for corrosion resistance and consistent service fitment. Confirm vehicle application by year, make, model, and front position before ordering the Centric 320.48008F.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for Suzuki
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.48008F, is a front vented rotor built for select Suzuki applications. It combines a fully coated disc finish with a coated hat to help resist corrosion while maintaining a smooth braking surface.
Compatible with 1999-2005 Suzuki Grand Vitara front and 2002-2006 Suzuki XL-7 front, this rotor is sized for direct-fit service on vehicles using a 310 mm outside diameter and 5-lug, 5.500-inch bolt pattern. The Centric 320.48008F is a practical OE-style replacement for drivers looking to restore front brake performance and appearance.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.48008F
- Fully coated disc finish with coated hat finish for added corrosion resistance
- Vented rotor design with straight vane style
- Smooth surface type for consistent pad contact
- 310 mm outside diameter, 22 mm nominal thickness, 20 mm discard thickness
- Floating disc mounting with 5 lug holes and 2 miscellaneous holes
- Front position application for select Suzuki Grand Vitara and Suzuki XL-7 models
Product Details
The Centric GCX Elemental Protection line focuses on corrosion protection across the rotor surfaces that are exposed to the elements. On this rotor, the coated disc and coated hat help preserve the part’s finish, while the vented construction and straight vanes support heat management during repeated braking. The Centric 320.48008F is engineered for front brake service on 1999-2005 Suzuki Grand Vitara and 2002-2006 Suzuki XL-7 models, making it a direct replacement choice when the original rotor is worn, scored, or rusted.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Front brake pulsation caused by rotor wear or uneven surfaces
- Brake noise related to damaged or rusted rotor faces
- Reduced braking consistency from heat-affected rotor condition
- Visible corrosion on the rotor hat and outer surfaces
- Service replacement needs for Suzuki Grand Vitara and Suzuki XL-7 front brakes
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and wheel bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. After installation, follow the brake pad manufacturer’s bedding procedure to help establish even pad transfer on the new rotor surface.
Quality Assurance
Centric GCX rotors are built as coated replacement brake components for corrosion resistance and consistent service fitment. Confirm vehicle application by year, make, model, and front position before ordering the Centric 320.48008F.
