Centric 320.65100F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor
The Centric GCX Elemental Protection Disc Brake Rotor - Full Coating is built for front brake service on select Ford F-150 and Lincoln Mark LT applications. Part number 320.65100F uses a fully coated finish and application-specific metallurgy to support OE-style braking performance while helping resist rust on exposed surfaces.
Key Features
- Part number 320.65100F
- Front disc brake rotor for 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT
- Fully coated disc finish with coated hat for corrosion resistance on non-mating surfaces
- Vented rotor design with smooth surface type
- 330 mm outside diameter, 90.2 mm center hole diameter, and 6-lug bolt pattern
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line uses application-specific coating patterns and OE-matched metallurgy
Product Details
Centric’s GCX rotor line is engineered around vehicle-specific brake pad friction needs and OEM-style metallurgical profiles. This rotor uses a straight vane, vented construction and a fully coated disc finish to help maintain appearance and reduce corrosion on the hat and non-mating surfaces. For drivers searching for a front brake rotor for a 2004-2008 Ford F-150 6 lug disc setup or a 2006-2008 Lincoln Mark LT front rotor, 320.65100F provides the fitment and dimensions needed for a direct replacement service.
This part cross-references Raybestos Brakes 680180FZN for the same application.
Common Issues This Rotor Can Address
- Front brake pulsation caused by worn or uneven rotor surfaces
- Rust buildup on exposed rotor areas
- Reduced braking consistency from rotor wear beyond service limits
- Noise or vibration related to rotor condition
- Replacement needs after brake caliper or pad service on 6-lug front applications
Installation Notes and Tips
Verify front axle fitment, 6-lug configuration, and rotor dimensions before installation. Measure discard thickness against the service limit and inspect the caliper, pads, and hub mounting surface for wear or corrosion before installing part number 320.65100F. Proper brake bedding after installation helps establish even pad transfer on the new rotor surface.
Quality Assurance
Centric GCX rotors are built to match OE performance targets and use coated non-mating surfaces for added corrosion protection. The GCX line is application-specific, with coating patterns and metallurgy selected to align with the vehicle’s brake system requirements.
Original: $68.51
-65%$68.51
$23.98Centric 320.65100F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor
The Centric GCX Elemental Protection Disc Brake Rotor - Full Coating is built for front brake service on select Ford F-150 and Lincoln Mark LT applications. Part number 320.65100F uses a fully coated finish and application-specific metallurgy to support OE-style braking performance while helping resist rust on exposed surfaces.
Key Features
- Part number 320.65100F
- Front disc brake rotor for 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT
- Fully coated disc finish with coated hat for corrosion resistance on non-mating surfaces
- Vented rotor design with smooth surface type
- 330 mm outside diameter, 90.2 mm center hole diameter, and 6-lug bolt pattern
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line uses application-specific coating patterns and OE-matched metallurgy
Product Details
Centric’s GCX rotor line is engineered around vehicle-specific brake pad friction needs and OEM-style metallurgical profiles. This rotor uses a straight vane, vented construction and a fully coated disc finish to help maintain appearance and reduce corrosion on the hat and non-mating surfaces. For drivers searching for a front brake rotor for a 2004-2008 Ford F-150 6 lug disc setup or a 2006-2008 Lincoln Mark LT front rotor, 320.65100F provides the fitment and dimensions needed for a direct replacement service.
This part cross-references Raybestos Brakes 680180FZN for the same application.
Common Issues This Rotor Can Address
- Front brake pulsation caused by worn or uneven rotor surfaces
- Rust buildup on exposed rotor areas
- Reduced braking consistency from rotor wear beyond service limits
- Noise or vibration related to rotor condition
- Replacement needs after brake caliper or pad service on 6-lug front applications
Installation Notes and Tips
Verify front axle fitment, 6-lug configuration, and rotor dimensions before installation. Measure discard thickness against the service limit and inspect the caliper, pads, and hub mounting surface for wear or corrosion before installing part number 320.65100F. Proper brake bedding after installation helps establish even pad transfer on the new rotor surface.
Quality Assurance
Centric GCX rotors are built to match OE performance targets and use coated non-mating surfaces for added corrosion protection. The GCX line is application-specific, with coating patterns and metallurgy selected to align with the vehicle’s brake system requirements.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor
The Centric GCX Elemental Protection Disc Brake Rotor - Full Coating is built for front brake service on select Ford F-150 and Lincoln Mark LT applications. Part number 320.65100F uses a fully coated finish and application-specific metallurgy to support OE-style braking performance while helping resist rust on exposed surfaces.
Key Features
- Part number 320.65100F
- Front disc brake rotor for 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT
- Fully coated disc finish with coated hat for corrosion resistance on non-mating surfaces
- Vented rotor design with smooth surface type
- 330 mm outside diameter, 90.2 mm center hole diameter, and 6-lug bolt pattern
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line uses application-specific coating patterns and OE-matched metallurgy
Product Details
Centric’s GCX rotor line is engineered around vehicle-specific brake pad friction needs and OEM-style metallurgical profiles. This rotor uses a straight vane, vented construction and a fully coated disc finish to help maintain appearance and reduce corrosion on the hat and non-mating surfaces. For drivers searching for a front brake rotor for a 2004-2008 Ford F-150 6 lug disc setup or a 2006-2008 Lincoln Mark LT front rotor, 320.65100F provides the fitment and dimensions needed for a direct replacement service.
This part cross-references Raybestos Brakes 680180FZN for the same application.
Common Issues This Rotor Can Address
- Front brake pulsation caused by worn or uneven rotor surfaces
- Rust buildup on exposed rotor areas
- Reduced braking consistency from rotor wear beyond service limits
- Noise or vibration related to rotor condition
- Replacement needs after brake caliper or pad service on 6-lug front applications
Installation Notes and Tips
Verify front axle fitment, 6-lug configuration, and rotor dimensions before installation. Measure discard thickness against the service limit and inspect the caliper, pads, and hub mounting surface for wear or corrosion before installing part number 320.65100F. Proper brake bedding after installation helps establish even pad transfer on the new rotor surface.
Quality Assurance
Centric GCX rotors are built to match OE performance targets and use coated non-mating surfaces for added corrosion protection. The GCX line is application-specific, with coating patterns and metallurgy selected to align with the vehicle’s brake system requirements.
