Centric 320.65108F Disc Brake Rotor - Rear
Rear Brake Rotor for Ford Escape and Mercury Mariner
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.65108F, is a rear solid rotor built for specific Ford, Mercury, and Mazda applications. It features a fully coated disc finish and coated hat finish to help protect exposed metal surfaces while maintaining a smooth braking surface.
Compatible with 2005-2010 Ford Escape rear, 2005-2009 Mercury Mariner rear, and 2005-2006 Mazda Tribute rear, this Centric rotor is sized for direct-fit service on the listed vehicles. The 320.65108F rotor uses a 5-lug pattern, 11.890-inch outside diameter, and 0.472-inch nominal thickness for the specified rear brake setup.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating product line
- Fully coated disc finish with coated hat finish
- Smooth surface type for rear brake service
- Solid rotor construction
- 5-lug mounting pattern with 4.500-inch bolt circle diameter
- Outside diameter: 11.890 inches (302 mm)
- Nominal thickness: 0.472 inches (12 mm)
- Discard thickness: 0.433 inches (11 mm)
- Center hole diameter: 2.835 inches (72 mm)
- Overall height: 2.205 inches (56 mm)
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor finishes for everyday brake service. On this rear disc brake rotor, the full coating covers the disc and hat areas to help reduce surface rust on exposed metal, while the smooth braking surface supports consistent pad contact. Part number 320.65108F is engineered for the rear position on the listed Ford Escape, Mercury Mariner, and Mazda Tribute applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Addresses
- Rear brake pulsation from rotor wear or thickness variation
- Surface rust on exposed rotor areas
- Brake noise caused by uneven rotor surfaces
- Reduced braking consistency from worn rear rotors
- Service replacement for a damaged or below-spec rear rotor
Installation Notes and Tips
Verify rear fitment by year, make, model, and position before installation. Inspect pads, caliper hardware, and hub condition during service, and clean the hub mounting surface so the rotor seats evenly. Measure rotor thickness and compare it to the discard thickness specification before reuse or replacement decisions. Confirm the 5-lug pattern and center hole dimensions match the vehicle before assembly.
Quality Assurance
Centric GCX Elemental Protection rotors are built with coated surfaces and application-specific dimensions to support consistent fitment on the listed rear brake applications. Part number 320.65108F is specified for 2005-2010 Ford Escape rear, 2005-2009 Mercury Mariner rear, and 2005-2006 Mazda Tribute rear.
Original: $44.25
-65%$44.25
$15.49Centric 320.65108F Disc Brake Rotor - Rear
Rear Brake Rotor for Ford Escape and Mercury Mariner
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.65108F, is a rear solid rotor built for specific Ford, Mercury, and Mazda applications. It features a fully coated disc finish and coated hat finish to help protect exposed metal surfaces while maintaining a smooth braking surface.
Compatible with 2005-2010 Ford Escape rear, 2005-2009 Mercury Mariner rear, and 2005-2006 Mazda Tribute rear, this Centric rotor is sized for direct-fit service on the listed vehicles. The 320.65108F rotor uses a 5-lug pattern, 11.890-inch outside diameter, and 0.472-inch nominal thickness for the specified rear brake setup.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating product line
- Fully coated disc finish with coated hat finish
- Smooth surface type for rear brake service
- Solid rotor construction
- 5-lug mounting pattern with 4.500-inch bolt circle diameter
- Outside diameter: 11.890 inches (302 mm)
- Nominal thickness: 0.472 inches (12 mm)
- Discard thickness: 0.433 inches (11 mm)
- Center hole diameter: 2.835 inches (72 mm)
- Overall height: 2.205 inches (56 mm)
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor finishes for everyday brake service. On this rear disc brake rotor, the full coating covers the disc and hat areas to help reduce surface rust on exposed metal, while the smooth braking surface supports consistent pad contact. Part number 320.65108F is engineered for the rear position on the listed Ford Escape, Mercury Mariner, and Mazda Tribute applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Addresses
- Rear brake pulsation from rotor wear or thickness variation
- Surface rust on exposed rotor areas
- Brake noise caused by uneven rotor surfaces
- Reduced braking consistency from worn rear rotors
- Service replacement for a damaged or below-spec rear rotor
Installation Notes and Tips
Verify rear fitment by year, make, model, and position before installation. Inspect pads, caliper hardware, and hub condition during service, and clean the hub mounting surface so the rotor seats evenly. Measure rotor thickness and compare it to the discard thickness specification before reuse or replacement decisions. Confirm the 5-lug pattern and center hole dimensions match the vehicle before assembly.
Quality Assurance
Centric GCX Elemental Protection rotors are built with coated surfaces and application-specific dimensions to support consistent fitment on the listed rear brake applications. Part number 320.65108F is specified for 2005-2010 Ford Escape rear, 2005-2009 Mercury Mariner rear, and 2005-2006 Mazda Tribute rear.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Brake Rotor for Ford Escape and Mercury Mariner
Centric GCX Elemental Protection Disc Brake Rotor, part number 320.65108F, is a rear solid rotor built for specific Ford, Mercury, and Mazda applications. It features a fully coated disc finish and coated hat finish to help protect exposed metal surfaces while maintaining a smooth braking surface.
Compatible with 2005-2010 Ford Escape rear, 2005-2009 Mercury Mariner rear, and 2005-2006 Mazda Tribute rear, this Centric rotor is sized for direct-fit service on the listed vehicles. The 320.65108F rotor uses a 5-lug pattern, 11.890-inch outside diameter, and 0.472-inch nominal thickness for the specified rear brake setup.
Key Features
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating product line
- Fully coated disc finish with coated hat finish
- Smooth surface type for rear brake service
- Solid rotor construction
- 5-lug mounting pattern with 4.500-inch bolt circle diameter
- Outside diameter: 11.890 inches (302 mm)
- Nominal thickness: 0.472 inches (12 mm)
- Discard thickness: 0.433 inches (11 mm)
- Center hole diameter: 2.835 inches (72 mm)
- Overall height: 2.205 inches (56 mm)
Product Details
The Centric GCX Elemental Protection line focuses on corrosion-resistant rotor finishes for everyday brake service. On this rear disc brake rotor, the full coating covers the disc and hat areas to help reduce surface rust on exposed metal, while the smooth braking surface supports consistent pad contact. Part number 320.65108F is engineered for the rear position on the listed Ford Escape, Mercury Mariner, and Mazda Tribute applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Rotor Addresses
- Rear brake pulsation from rotor wear or thickness variation
- Surface rust on exposed rotor areas
- Brake noise caused by uneven rotor surfaces
- Reduced braking consistency from worn rear rotors
- Service replacement for a damaged or below-spec rear rotor
Installation Notes and Tips
Verify rear fitment by year, make, model, and position before installation. Inspect pads, caliper hardware, and hub condition during service, and clean the hub mounting surface so the rotor seats evenly. Measure rotor thickness and compare it to the discard thickness specification before reuse or replacement decisions. Confirm the 5-lug pattern and center hole dimensions match the vehicle before assembly.
Quality Assurance
Centric GCX Elemental Protection rotors are built with coated surfaces and application-specific dimensions to support consistent fitment on the listed rear brake applications. Part number 320.65108F is specified for 2005-2010 Ford Escape rear, 2005-2009 Mercury Mariner rear, and 2005-2006 Mazda Tribute rear.
