Centric 320.67048F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor - Full Coating is built for OE-style braking performance with added resistance to rust and corrosion. This front vented rotor is engineered for 2000-2001 Dodge Ram 1500 and 2000-2001 Dodge Ramcharger applications, making it a direct-fit option for drivers replacing worn front brake rotors.
Part number 320.67048F uses a fully coated disc finish and coated hat finish to help maintain appearance and protect non-mating surfaces over time. For shoppers looking for a front brake rotor for Dodge Ram 1500 or Dodge Ramcharger, 320.67048F combines application-specific metallurgy with a smooth braking surface.
Key Features
- Fits 2000-2001 Dodge Ram 1500, front
- Fits 2000-2001 Dodge Ramcharger, front
- Part number 320.67048F
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vane style
- Smooth surface type for consistent pad contact
- Floating disc mounting and 5-lug pattern
- Outside diameter: 304.0 mm (11.969 in)
- Nominal thickness: 30.0 mm; discard thickness: 28.39 mm
Product Details
Centric’s GCX Elemental Protection line is built around vehicle-specific rotor metallurgy and coating patterns. This rotor uses Centric’s RS200 coating on non-mating surfaces to help resist corrosion while maintaining OE-type fit and function. The rotor’s 79.8 mm center hole, 139.7 mm bolt circle, and 69.8 mm overall height align with the listed front applications, while the vented, straight-vane construction supports heat management during repeated stops.
Part number 320.67048F is a practical choice for Dodge Ram 1500 front brake rotor replacement and Dodge Ramcharger front brake rotor replacement when the goal is to restore braking feel and replace a worn or rusted rotor with a coated unit. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Can Address
- Brake pulsation caused by rotor wear or thickness variation
- Visible rust on exposed rotor surfaces
- Reduced braking consistency from worn front rotors
- Noise related to uneven rotor surfaces
- Loss of OE-style braking performance on the front axle
Installation Notes and Tips
Verify rotor diameter, thickness, bolt pattern, and center bore before installation. Clean the hub mounting surface thoroughly so the floating mount seats evenly, and inspect pads, calipers, and hardware condition before reassembly. Because this rotor is fully coated, avoid contaminating the braking surface during handling and follow standard brake service procedures for bedding-in new rotors and pads.
Quality Assurance
Centric designs GCX rotors to match OE performance targets while using corrosion-resistant coatings and application-specific metallurgy. Part number 320.67048F is manufactured for the listed 2000-2001 Dodge Ram 1500 and Dodge Ramcharger front applications, with specifications that support direct replacement use.
Original: $57.37
-65%$57.37
$20.08Centric 320.67048F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor - Full Coating is built for OE-style braking performance with added resistance to rust and corrosion. This front vented rotor is engineered for 2000-2001 Dodge Ram 1500 and 2000-2001 Dodge Ramcharger applications, making it a direct-fit option for drivers replacing worn front brake rotors.
Part number 320.67048F uses a fully coated disc finish and coated hat finish to help maintain appearance and protect non-mating surfaces over time. For shoppers looking for a front brake rotor for Dodge Ram 1500 or Dodge Ramcharger, 320.67048F combines application-specific metallurgy with a smooth braking surface.
Key Features
- Fits 2000-2001 Dodge Ram 1500, front
- Fits 2000-2001 Dodge Ramcharger, front
- Part number 320.67048F
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vane style
- Smooth surface type for consistent pad contact
- Floating disc mounting and 5-lug pattern
- Outside diameter: 304.0 mm (11.969 in)
- Nominal thickness: 30.0 mm; discard thickness: 28.39 mm
Product Details
Centric’s GCX Elemental Protection line is built around vehicle-specific rotor metallurgy and coating patterns. This rotor uses Centric’s RS200 coating on non-mating surfaces to help resist corrosion while maintaining OE-type fit and function. The rotor’s 79.8 mm center hole, 139.7 mm bolt circle, and 69.8 mm overall height align with the listed front applications, while the vented, straight-vane construction supports heat management during repeated stops.
Part number 320.67048F is a practical choice for Dodge Ram 1500 front brake rotor replacement and Dodge Ramcharger front brake rotor replacement when the goal is to restore braking feel and replace a worn or rusted rotor with a coated unit. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Can Address
- Brake pulsation caused by rotor wear or thickness variation
- Visible rust on exposed rotor surfaces
- Reduced braking consistency from worn front rotors
- Noise related to uneven rotor surfaces
- Loss of OE-style braking performance on the front axle
Installation Notes and Tips
Verify rotor diameter, thickness, bolt pattern, and center bore before installation. Clean the hub mounting surface thoroughly so the floating mount seats evenly, and inspect pads, calipers, and hardware condition before reassembly. Because this rotor is fully coated, avoid contaminating the braking surface during handling and follow standard brake service procedures for bedding-in new rotors and pads.
Quality Assurance
Centric designs GCX rotors to match OE performance targets while using corrosion-resistant coatings and application-specific metallurgy. Part number 320.67048F is manufactured for the listed 2000-2001 Dodge Ram 1500 and Dodge Ramcharger front applications, with specifications that support direct replacement use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor Overview
The Centric GCX Elemental Protection Disc Brake Rotor - Full Coating is built for OE-style braking performance with added resistance to rust and corrosion. This front vented rotor is engineered for 2000-2001 Dodge Ram 1500 and 2000-2001 Dodge Ramcharger applications, making it a direct-fit option for drivers replacing worn front brake rotors.
Part number 320.67048F uses a fully coated disc finish and coated hat finish to help maintain appearance and protect non-mating surfaces over time. For shoppers looking for a front brake rotor for Dodge Ram 1500 or Dodge Ramcharger, 320.67048F combines application-specific metallurgy with a smooth braking surface.
Key Features
- Fits 2000-2001 Dodge Ram 1500, front
- Fits 2000-2001 Dodge Ramcharger, front
- Part number 320.67048F
- Fully coated disc finish with coated hat finish
- Vented rotor design with straight vane style
- Smooth surface type for consistent pad contact
- Floating disc mounting and 5-lug pattern
- Outside diameter: 304.0 mm (11.969 in)
- Nominal thickness: 30.0 mm; discard thickness: 28.39 mm
Product Details
Centric’s GCX Elemental Protection line is built around vehicle-specific rotor metallurgy and coating patterns. This rotor uses Centric’s RS200 coating on non-mating surfaces to help resist corrosion while maintaining OE-type fit and function. The rotor’s 79.8 mm center hole, 139.7 mm bolt circle, and 69.8 mm overall height align with the listed front applications, while the vented, straight-vane construction supports heat management during repeated stops.
Part number 320.67048F is a practical choice for Dodge Ram 1500 front brake rotor replacement and Dodge Ramcharger front brake rotor replacement when the goal is to restore braking feel and replace a worn or rusted rotor with a coated unit. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Rotor Can Address
- Brake pulsation caused by rotor wear or thickness variation
- Visible rust on exposed rotor surfaces
- Reduced braking consistency from worn front rotors
- Noise related to uneven rotor surfaces
- Loss of OE-style braking performance on the front axle
Installation Notes and Tips
Verify rotor diameter, thickness, bolt pattern, and center bore before installation. Clean the hub mounting surface thoroughly so the floating mount seats evenly, and inspect pads, calipers, and hardware condition before reassembly. Because this rotor is fully coated, avoid contaminating the braking surface during handling and follow standard brake service procedures for bedding-in new rotors and pads.
Quality Assurance
Centric designs GCX rotors to match OE performance targets while using corrosion-resistant coatings and application-specific metallurgy. Part number 320.67048F is manufactured for the listed 2000-2001 Dodge Ram 1500 and Dodge Ramcharger front applications, with specifications that support direct replacement use.
