Centric 320.69001F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Hummer H3 and H3T
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.69001F, is a front vented rotor built for 2006-2010 Hummer H3 and 2009-2010 Hummer H3T applications. Its fully coated disc finish and coated hat help protect exposed surfaces, while the smooth braking surface supports consistent pad contact.
Key Features
- Fits 2006-2010 Hummer H3, front
- Fits 2009-2010 Hummer H3T, front
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.69001F
- Fully coated disc finish with coated hat
- Vented rotor design with smooth surface type
- Floating disc mounting with straight vane style
- Outside diameter: 12.402 in. / 315.000 mm
- Nominal thickness: 1.102 in. / 28.000 mm
- Discard thickness: 1.043 in. / 26.500 mm
- 6-lug pattern with 5.500 in. bolt circle
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built for drivers who need a front rotor replacement that matches the fitment and dimensions of the original brake setup. This rotor uses a vented construction, straight vane design, and floating disc mounting to support stable braking performance on the Hummer H3 and Hummer H3T. The fully coated finish helps protect the rotor surfaces, including the hat, from exposure during service and everyday use. If you are searching for a front brake rotor for a 2006-2010 Hummer H3 or a 2009-2010 Hummer H3T, part number 320.69001F is the direct application to review.
Common Issues This Rotor Can Address
- Front rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Reduced braking consistency from heat-stressed rotors
- Surface corrosion on exposed rotor areas
- Noise or vibration linked to worn front brake rotors
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and 6-lug bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. Because this is a front vented rotor for Hummer H3 and Hummer H3T applications, confirm left-right axle service requirements and follow the vehicle service manual for torque and bedding procedures.
Quality Assurance
Centric GCX Elemental Protection Disc Brake Rotors are engineered around application-specific dimensions and coated surfaces for service-ready fitment. Part number 320.69001F is listed for confirmed front applications on the Hummer H3 and Hummer H3T.
Original: $59.88
-65%$59.88
$20.96Centric 320.69001F Disc Brake Rotor - Front
Centric GCX Front Brake Rotor for Hummer H3 and H3T
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.69001F, is a front vented rotor built for 2006-2010 Hummer H3 and 2009-2010 Hummer H3T applications. Its fully coated disc finish and coated hat help protect exposed surfaces, while the smooth braking surface supports consistent pad contact.
Key Features
- Fits 2006-2010 Hummer H3, front
- Fits 2009-2010 Hummer H3T, front
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.69001F
- Fully coated disc finish with coated hat
- Vented rotor design with smooth surface type
- Floating disc mounting with straight vane style
- Outside diameter: 12.402 in. / 315.000 mm
- Nominal thickness: 1.102 in. / 28.000 mm
- Discard thickness: 1.043 in. / 26.500 mm
- 6-lug pattern with 5.500 in. bolt circle
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built for drivers who need a front rotor replacement that matches the fitment and dimensions of the original brake setup. This rotor uses a vented construction, straight vane design, and floating disc mounting to support stable braking performance on the Hummer H3 and Hummer H3T. The fully coated finish helps protect the rotor surfaces, including the hat, from exposure during service and everyday use. If you are searching for a front brake rotor for a 2006-2010 Hummer H3 or a 2009-2010 Hummer H3T, part number 320.69001F is the direct application to review.
Common Issues This Rotor Can Address
- Front rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Reduced braking consistency from heat-stressed rotors
- Surface corrosion on exposed rotor areas
- Noise or vibration linked to worn front brake rotors
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and 6-lug bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. Because this is a front vented rotor for Hummer H3 and Hummer H3T applications, confirm left-right axle service requirements and follow the vehicle service manual for torque and bedding procedures.
Quality Assurance
Centric GCX Elemental Protection Disc Brake Rotors are engineered around application-specific dimensions and coated surfaces for service-ready fitment. Part number 320.69001F is listed for confirmed front applications on the Hummer H3 and Hummer H3T.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric GCX Front Brake Rotor for Hummer H3 and H3T
The Centric GCX Elemental Protection Disc Brake Rotor, part number 320.69001F, is a front vented rotor built for 2006-2010 Hummer H3 and 2009-2010 Hummer H3T applications. Its fully coated disc finish and coated hat help protect exposed surfaces, while the smooth braking surface supports consistent pad contact.
Key Features
- Fits 2006-2010 Hummer H3, front
- Fits 2009-2010 Hummer H3T, front
- Centric GCX Elemental Protection Disc Brake Rotors - Full Coating line
- Part number 320.69001F
- Fully coated disc finish with coated hat
- Vented rotor design with smooth surface type
- Floating disc mounting with straight vane style
- Outside diameter: 12.402 in. / 315.000 mm
- Nominal thickness: 1.102 in. / 28.000 mm
- Discard thickness: 1.043 in. / 26.500 mm
- 6-lug pattern with 5.500 in. bolt circle
Product Details
Centric GCX Elemental Protection Disc Brake Rotors are built for drivers who need a front rotor replacement that matches the fitment and dimensions of the original brake setup. This rotor uses a vented construction, straight vane design, and floating disc mounting to support stable braking performance on the Hummer H3 and Hummer H3T. The fully coated finish helps protect the rotor surfaces, including the hat, from exposure during service and everyday use. If you are searching for a front brake rotor for a 2006-2010 Hummer H3 or a 2009-2010 Hummer H3T, part number 320.69001F is the direct application to review.
Common Issues This Rotor Can Address
- Front rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Reduced braking consistency from heat-stressed rotors
- Surface corrosion on exposed rotor areas
- Noise or vibration linked to worn front brake rotors
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and 6-lug bolt pattern before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition at the same time. Because this is a front vented rotor for Hummer H3 and Hummer H3T applications, confirm left-right axle service requirements and follow the vehicle service manual for torque and bedding procedures.
Quality Assurance
Centric GCX Elemental Protection Disc Brake Rotors are engineered around application-specific dimensions and coated surfaces for service-ready fitment. Part number 320.69001F is listed for confirmed front applications on the Hummer H3 and Hummer H3T.
