Centric 906.33022 Disc Brake Kit - Front and Rear
Centric OE Coated Brake Kit for Audi A6 Quattro
Centric part number 906.33022 is a front and rear disc brake kit built for select Audi A6 Quattro applications. It combines Centric Premium black rotors with Posi Quiet brake pads to deliver OE-style braking performance with low dust and reduced noise.
The Centric OE Coated - 4 Wheel Disc Brake Kits line focuses on service-ready brake components for drivers who want a direct replacement approach with upgraded rotor protection and consistent pad feel. This kit is designed around the needs of 1998-2001 Audi A6 Quattro models with the listed wheel and brake configuration details.
Key Features
- Centric Premium black rotors with a premium black E-coat finish
- Posi Quiet friction material for controlled braking response
- Positive molded brake pad construction with shims
- Multi-layered shims for noise control
- Double disc ground braking surfaces for consistent contact
- Iron rotor material for OE-style durability
- Stainless steel hardware where applicable
Detailed Description
Centric 906.33022 is engineered as a premium OE upgrade for Audi A6 Quattro brake service. The kit pairs coated rotors with Posi Quiet pads to support smoother operation, lower brake dust, and quieter braking compared with worn factory components. The black E-coat finish helps protect non-friction surfaces, while the double disc ground braking faces promote even pad contact during service.
This kit is a strong match for Audi A6 Quattro owners searching for a front and rear brake kit for 1998-2001 Audi A6 Quattro, 16-inch wheels, with the listed rear disc and tire configuration notes. It is also a relevant choice for shoppers looking up Centric 906.33022 for Audi A6 Quattro brake replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or uneven rotor surfaces
- Excess brake dust from aging friction material
- Pulsation or vibration caused by rotor wear
- Reduced stopping consistency from heat-worn components
- Corrosion on exposed rotor surfaces
Installation Notes and Tips
Verify wheel size, rear rotor height, engine, and chassis notes before ordering. This kit is listed for 1998-2001 Audi A6 Quattro front and rear applications with specific fitment restrictions, including 16-inch wheels and the noted exclusions. Inspect calipers, slides, and brake hoses during service so the new pads and rotors can perform as intended.
For best results, follow proper brake bedding procedures after installation and confirm rotor and pad surfaces are clean before assembly.
Quality Assurance
Centric OE Coated brake kits are built around OE-style replacement standards, using coated rotors and Posi Quiet pads for service life, noise control, and consistent braking performance.
Centric 906.33022 Disc Brake Kit - Front and Rear
Centric OE Coated Brake Kit for Audi A6 Quattro
Centric part number 906.33022 is a front and rear disc brake kit built for select Audi A6 Quattro applications. It combines Centric Premium black rotors with Posi Quiet brake pads to deliver OE-style braking performance with low dust and reduced noise.
The Centric OE Coated - 4 Wheel Disc Brake Kits line focuses on service-ready brake components for drivers who want a direct replacement approach with upgraded rotor protection and consistent pad feel. This kit is designed around the needs of 1998-2001 Audi A6 Quattro models with the listed wheel and brake configuration details.
Key Features
- Centric Premium black rotors with a premium black E-coat finish
- Posi Quiet friction material for controlled braking response
- Positive molded brake pad construction with shims
- Multi-layered shims for noise control
- Double disc ground braking surfaces for consistent contact
- Iron rotor material for OE-style durability
- Stainless steel hardware where applicable
Detailed Description
Centric 906.33022 is engineered as a premium OE upgrade for Audi A6 Quattro brake service. The kit pairs coated rotors with Posi Quiet pads to support smoother operation, lower brake dust, and quieter braking compared with worn factory components. The black E-coat finish helps protect non-friction surfaces, while the double disc ground braking faces promote even pad contact during service.
This kit is a strong match for Audi A6 Quattro owners searching for a front and rear brake kit for 1998-2001 Audi A6 Quattro, 16-inch wheels, with the listed rear disc and tire configuration notes. It is also a relevant choice for shoppers looking up Centric 906.33022 for Audi A6 Quattro brake replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or uneven rotor surfaces
- Excess brake dust from aging friction material
- Pulsation or vibration caused by rotor wear
- Reduced stopping consistency from heat-worn components
- Corrosion on exposed rotor surfaces
Installation Notes and Tips
Verify wheel size, rear rotor height, engine, and chassis notes before ordering. This kit is listed for 1998-2001 Audi A6 Quattro front and rear applications with specific fitment restrictions, including 16-inch wheels and the noted exclusions. Inspect calipers, slides, and brake hoses during service so the new pads and rotors can perform as intended.
For best results, follow proper brake bedding procedures after installation and confirm rotor and pad surfaces are clean before assembly.
Quality Assurance
Centric OE Coated brake kits are built around OE-style replacement standards, using coated rotors and Posi Quiet pads for service life, noise control, and consistent braking performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric OE Coated Brake Kit for Audi A6 Quattro
Centric part number 906.33022 is a front and rear disc brake kit built for select Audi A6 Quattro applications. It combines Centric Premium black rotors with Posi Quiet brake pads to deliver OE-style braking performance with low dust and reduced noise.
The Centric OE Coated - 4 Wheel Disc Brake Kits line focuses on service-ready brake components for drivers who want a direct replacement approach with upgraded rotor protection and consistent pad feel. This kit is designed around the needs of 1998-2001 Audi A6 Quattro models with the listed wheel and brake configuration details.
Key Features
- Centric Premium black rotors with a premium black E-coat finish
- Posi Quiet friction material for controlled braking response
- Positive molded brake pad construction with shims
- Multi-layered shims for noise control
- Double disc ground braking surfaces for consistent contact
- Iron rotor material for OE-style durability
- Stainless steel hardware where applicable
Detailed Description
Centric 906.33022 is engineered as a premium OE upgrade for Audi A6 Quattro brake service. The kit pairs coated rotors with Posi Quiet pads to support smoother operation, lower brake dust, and quieter braking compared with worn factory components. The black E-coat finish helps protect non-friction surfaces, while the double disc ground braking faces promote even pad contact during service.
This kit is a strong match for Audi A6 Quattro owners searching for a front and rear brake kit for 1998-2001 Audi A6 Quattro, 16-inch wheels, with the listed rear disc and tire configuration notes. It is also a relevant choice for shoppers looking up Centric 906.33022 for Audi A6 Quattro brake replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or uneven rotor surfaces
- Excess brake dust from aging friction material
- Pulsation or vibration caused by rotor wear
- Reduced stopping consistency from heat-worn components
- Corrosion on exposed rotor surfaces
Installation Notes and Tips
Verify wheel size, rear rotor height, engine, and chassis notes before ordering. This kit is listed for 1998-2001 Audi A6 Quattro front and rear applications with specific fitment restrictions, including 16-inch wheels and the noted exclusions. Inspect calipers, slides, and brake hoses during service so the new pads and rotors can perform as intended.
For best results, follow proper brake bedding procedures after installation and confirm rotor and pad surfaces are clean before assembly.
Quality Assurance
Centric OE Coated brake kits are built around OE-style replacement standards, using coated rotors and Posi Quiet pads for service life, noise control, and consistent braking performance.
