Dana Spicer 10024298 Drive Axle Shaft - Rear Left
Rear Left Axle Shaft for GM 8.6 Applications
The Dana Spicer SVL 10024298 is a complete rear left drive axle shaft assembly built for GM 8.6 semi-floating rear axle applications. It is a steel replacement axle shaft for vehicles that need the correct 30-spline inboard configuration, 33.110-inch shaft length, and 6 x 5.00 bolt pattern.
Backed by Dana and engineered for a wide range of automotive aftermarket applications, this axle shaft is a direct-fit option for select Chevrolet, GMC, Buick, Saab, and Isuzu models with the specified rear axle setup. The Dana Spicer SVL line focuses on coverage for hard-to-find applications while maintaining the dimensional accuracy needed for proper driveline service.
Key Features
- Brand: Dana Spicer SVL
- Part number: 10024298
- Rear left complete axle shaft assembly
- Steel construction
- GM 8.6 axle model
- 30-spline inboard design
- 33.110-inch overall axle length
- 6 x 5.00 bolt pattern
- Semi-floating axle type
- ABS non-ABS application
Detailed Product Overview
This Dana Spicer axle shaft is built for rear left service on vehicles equipped with the GM 8.6 axle and the matching spline count, length, and bolt pattern. It is listed for 2002-2009 applications including Chevrolet Trailblazer, GMC Envoy, Buick Rainier, Saab 9-7x, Chevrolet SSR, Chevrolet Trailblazer EXT, GMC Envoy XL, Isuzu Ascender, and GMC Envoy XUV, with fitment dependent on axle ratio and Posi-Traction configuration where noted. If you are replacing a worn or damaged rear axle shaft, part number 10024298 provides the dimensional and axle-specific details needed for a proper match.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Broken or bent rear axle shaft
- Excessive drivetrain vibration from shaft wear or damage
- Noise from a failing axle assembly in the rear left position
- Loss of driveline integrity after impact or component fatigue
- Incorrect replacement shaft length or spline mismatch during repair
Installation Notes and Fitment Tips
Compatible With 2006-2009 Chevrolet Trailblazer, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2005-2009 GMC Envoy, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2005-2009 Saab 9-7x, rear left, with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2004-2007 Buick Rainier, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2003-2006 Chevrolet SSR, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2002-2006 Chevrolet Trailblazer EXT, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2002-2006 GMC Envoy XL, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2003-2006 Isuzu Ascender, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2004-2005 GMC Envoy XUV, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL.
Verify axle model, spline count, shaft length, bolt pattern, and rear left position before installation. Confirm whether the vehicle is equipped with Posi-Traction and the listed gear ratio where required by the fitment notes.
Quality Assurance
Dana Spicer supplies replacement axle shafts for the automotive aftermarket and backs this SVL line with Dana engineering support. The product is manufactured for broad application coverage, including harder-to-source vehicle configurations, while maintaining the specifications needed for driveline service.
Dana Spicer 10024298 Drive Axle Shaft - Rear Left
Rear Left Axle Shaft for GM 8.6 Applications
The Dana Spicer SVL 10024298 is a complete rear left drive axle shaft assembly built for GM 8.6 semi-floating rear axle applications. It is a steel replacement axle shaft for vehicles that need the correct 30-spline inboard configuration, 33.110-inch shaft length, and 6 x 5.00 bolt pattern.
Backed by Dana and engineered for a wide range of automotive aftermarket applications, this axle shaft is a direct-fit option for select Chevrolet, GMC, Buick, Saab, and Isuzu models with the specified rear axle setup. The Dana Spicer SVL line focuses on coverage for hard-to-find applications while maintaining the dimensional accuracy needed for proper driveline service.
Key Features
- Brand: Dana Spicer SVL
- Part number: 10024298
- Rear left complete axle shaft assembly
- Steel construction
- GM 8.6 axle model
- 30-spline inboard design
- 33.110-inch overall axle length
- 6 x 5.00 bolt pattern
- Semi-floating axle type
- ABS non-ABS application
Detailed Product Overview
This Dana Spicer axle shaft is built for rear left service on vehicles equipped with the GM 8.6 axle and the matching spline count, length, and bolt pattern. It is listed for 2002-2009 applications including Chevrolet Trailblazer, GMC Envoy, Buick Rainier, Saab 9-7x, Chevrolet SSR, Chevrolet Trailblazer EXT, GMC Envoy XL, Isuzu Ascender, and GMC Envoy XUV, with fitment dependent on axle ratio and Posi-Traction configuration where noted. If you are replacing a worn or damaged rear axle shaft, part number 10024298 provides the dimensional and axle-specific details needed for a proper match.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Broken or bent rear axle shaft
- Excessive drivetrain vibration from shaft wear or damage
- Noise from a failing axle assembly in the rear left position
- Loss of driveline integrity after impact or component fatigue
- Incorrect replacement shaft length or spline mismatch during repair
Installation Notes and Fitment Tips
Compatible With 2006-2009 Chevrolet Trailblazer, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2005-2009 GMC Envoy, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2005-2009 Saab 9-7x, rear left, with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2004-2007 Buick Rainier, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2003-2006 Chevrolet SSR, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2002-2006 Chevrolet Trailblazer EXT, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2002-2006 GMC Envoy XL, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2003-2006 Isuzu Ascender, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2004-2005 GMC Envoy XUV, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL.
Verify axle model, spline count, shaft length, bolt pattern, and rear left position before installation. Confirm whether the vehicle is equipped with Posi-Traction and the listed gear ratio where required by the fitment notes.
Quality Assurance
Dana Spicer supplies replacement axle shafts for the automotive aftermarket and backs this SVL line with Dana engineering support. The product is manufactured for broad application coverage, including harder-to-source vehicle configurations, while maintaining the specifications needed for driveline service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Left Axle Shaft for GM 8.6 Applications
The Dana Spicer SVL 10024298 is a complete rear left drive axle shaft assembly built for GM 8.6 semi-floating rear axle applications. It is a steel replacement axle shaft for vehicles that need the correct 30-spline inboard configuration, 33.110-inch shaft length, and 6 x 5.00 bolt pattern.
Backed by Dana and engineered for a wide range of automotive aftermarket applications, this axle shaft is a direct-fit option for select Chevrolet, GMC, Buick, Saab, and Isuzu models with the specified rear axle setup. The Dana Spicer SVL line focuses on coverage for hard-to-find applications while maintaining the dimensional accuracy needed for proper driveline service.
Key Features
- Brand: Dana Spicer SVL
- Part number: 10024298
- Rear left complete axle shaft assembly
- Steel construction
- GM 8.6 axle model
- 30-spline inboard design
- 33.110-inch overall axle length
- 6 x 5.00 bolt pattern
- Semi-floating axle type
- ABS non-ABS application
Detailed Product Overview
This Dana Spicer axle shaft is built for rear left service on vehicles equipped with the GM 8.6 axle and the matching spline count, length, and bolt pattern. It is listed for 2002-2009 applications including Chevrolet Trailblazer, GMC Envoy, Buick Rainier, Saab 9-7x, Chevrolet SSR, Chevrolet Trailblazer EXT, GMC Envoy XL, Isuzu Ascender, and GMC Envoy XUV, with fitment dependent on axle ratio and Posi-Traction configuration where noted. If you are replacing a worn or damaged rear axle shaft, part number 10024298 provides the dimensional and axle-specific details needed for a proper match.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Broken or bent rear axle shaft
- Excessive drivetrain vibration from shaft wear or damage
- Noise from a failing axle assembly in the rear left position
- Loss of driveline integrity after impact or component fatigue
- Incorrect replacement shaft length or spline mismatch during repair
Installation Notes and Fitment Tips
Compatible With 2006-2009 Chevrolet Trailblazer, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2005-2009 GMC Envoy, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2005-2009 Saab 9-7x, rear left, with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2004-2007 Buick Rainier, rear left, with Posi-Traction; with 3.42 Gear Ratio; with 3.73 Gear Ratio; with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2003-2006 Chevrolet SSR, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2002-2006 Chevrolet Trailblazer EXT, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2002-2006 GMC Envoy XL, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2003-2006 Isuzu Ascender, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL. Compatible With 2004-2005 GMC Envoy XUV, rear left, with 30 Splines; with 33.11in Shaft Length; with GM 8.6 Axle; SVL.
Verify axle model, spline count, shaft length, bolt pattern, and rear left position before installation. Confirm whether the vehicle is equipped with Posi-Traction and the listed gear ratio where required by the fitment notes.
Quality Assurance
Dana Spicer supplies replacement axle shafts for the automotive aftermarket and backs this SVL line with Dana engineering support. The product is manufactured for broad application coverage, including harder-to-source vehicle configurations, while maintaining the specifications needed for driveline service.
