Dana Spicer 74210X Differential Carrier - Rear
Dana Spicer FSGR 74210X Rear Differential Carrier
The Dana Spicer FSGR 74210X is a loaded rear differential carrier for Dana 35 axle applications. Built to OE standards, it is a direct replacement for Jeep Cherokee, Jeep Wrangler, and Jeep Grand Cherokee rear axle service where Trac-Lok or limited-slip operation is specified.
Key Features
- Brand: Dana Spicer
- Part number: 74210X
- Brand line: FSGR
- Rear differential carrier for Dana 35 axle applications
- Loaded carrier with bearings included
- Trac-Lok differential type
- Axle shaft spline quantity: 27
- Axle spline diameter: 1.18 in.
- Differential case split: 3.54 and up
- Cover bolt quantity: 10
Product Details
This Dana Spicer differential carrier is engineered for rear Dana 35 axle service and is built to the same standards used for original equipment parts. The FSGR line supports Jeep rear axle repairs where the factory setup uses spider gears and, in many applications, Trac-Lok or limited-slip differential operation. If you are replacing a worn carrier in a Jeep Cherokee, Jeep Wrangler, or Jeep Grand Cherokee, the 74210X provides the correct OE-style fitment for listed Dana 35 applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Worn or noisy rear differential carrier components
- Loss of limited-slip or Trac-Lok performance
- Damage to spider gear carrier assemblies
- Rear axle service needs on Dana 35-equipped Jeep vehicles
- Replacement of an OE-style carrier in high-mileage driveline repairs
Installation Notes and Fitment
Fits 2001 Jeep Cherokee, rear, with Limited Slip Differential; with Spider Gears; To 10/01/2000; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 1997-2001 Jeep TJ, rear, with Spider Gears; with Trac-Lok Differential; Replaces OE Part Number(s) 5252496; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 2001 Jeep Wrangler, rear, with Spider Gears; without Limited Slip Differential; To 10/01/2000; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 1987-2000 Jeep Cherokee, rear, with Spider Gears; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; with Limited Slip Differential; FSGR.
Fits 1997-2000 Jeep Wrangler, rear, with Trac-Lok Differential; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; with Spider Gears; FSGR.
Fits 1994-1998 Jeep Grand Cherokee, rear, with Dana 35 Axle; with Limited Slip Differential; with Spider Gears; FSGR.
Fits 1987-1995 Jeep Wrangler, rear, with Dana 35 Axle; with Spider Gears; with Trac-Lok Differential; FSGR.
Fits 1993 Jeep Grand Cherokee, rear, with Limited Slip Differential; with Spider Gears; FSGR.
Fits 1985-1986 Jeep Cherokee, rear, with Limited Slip Differential; with Spider Gears; FSGR.
Verify axle model, gear ratio, and differential type before installation. This carrier is for rear Dana 35 applications only and should be matched to the vehicle’s existing axle configuration.
Quality Assurance
Genuine Spicer light vehicle axle products are manufactured to OE-level standards because they are OE parts. Dana continues to develop Spicer axle components with the goal of meeting or exceeding original equipment performance and reliability for listed Jeep rear axle applications.
Original: $895.18
-65%$895.18
$313.31Dana Spicer 74210X Differential Carrier - Rear
Dana Spicer FSGR 74210X Rear Differential Carrier
The Dana Spicer FSGR 74210X is a loaded rear differential carrier for Dana 35 axle applications. Built to OE standards, it is a direct replacement for Jeep Cherokee, Jeep Wrangler, and Jeep Grand Cherokee rear axle service where Trac-Lok or limited-slip operation is specified.
Key Features
- Brand: Dana Spicer
- Part number: 74210X
- Brand line: FSGR
- Rear differential carrier for Dana 35 axle applications
- Loaded carrier with bearings included
- Trac-Lok differential type
- Axle shaft spline quantity: 27
- Axle spline diameter: 1.18 in.
- Differential case split: 3.54 and up
- Cover bolt quantity: 10
Product Details
This Dana Spicer differential carrier is engineered for rear Dana 35 axle service and is built to the same standards used for original equipment parts. The FSGR line supports Jeep rear axle repairs where the factory setup uses spider gears and, in many applications, Trac-Lok or limited-slip differential operation. If you are replacing a worn carrier in a Jeep Cherokee, Jeep Wrangler, or Jeep Grand Cherokee, the 74210X provides the correct OE-style fitment for listed Dana 35 applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Worn or noisy rear differential carrier components
- Loss of limited-slip or Trac-Lok performance
- Damage to spider gear carrier assemblies
- Rear axle service needs on Dana 35-equipped Jeep vehicles
- Replacement of an OE-style carrier in high-mileage driveline repairs
Installation Notes and Fitment
Fits 2001 Jeep Cherokee, rear, with Limited Slip Differential; with Spider Gears; To 10/01/2000; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 1997-2001 Jeep TJ, rear, with Spider Gears; with Trac-Lok Differential; Replaces OE Part Number(s) 5252496; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 2001 Jeep Wrangler, rear, with Spider Gears; without Limited Slip Differential; To 10/01/2000; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 1987-2000 Jeep Cherokee, rear, with Spider Gears; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; with Limited Slip Differential; FSGR.
Fits 1997-2000 Jeep Wrangler, rear, with Trac-Lok Differential; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; with Spider Gears; FSGR.
Fits 1994-1998 Jeep Grand Cherokee, rear, with Dana 35 Axle; with Limited Slip Differential; with Spider Gears; FSGR.
Fits 1987-1995 Jeep Wrangler, rear, with Dana 35 Axle; with Spider Gears; with Trac-Lok Differential; FSGR.
Fits 1993 Jeep Grand Cherokee, rear, with Limited Slip Differential; with Spider Gears; FSGR.
Fits 1985-1986 Jeep Cherokee, rear, with Limited Slip Differential; with Spider Gears; FSGR.
Verify axle model, gear ratio, and differential type before installation. This carrier is for rear Dana 35 applications only and should be matched to the vehicle’s existing axle configuration.
Quality Assurance
Genuine Spicer light vehicle axle products are manufactured to OE-level standards because they are OE parts. Dana continues to develop Spicer axle components with the goal of meeting or exceeding original equipment performance and reliability for listed Jeep rear axle applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dana Spicer FSGR 74210X Rear Differential Carrier
The Dana Spicer FSGR 74210X is a loaded rear differential carrier for Dana 35 axle applications. Built to OE standards, it is a direct replacement for Jeep Cherokee, Jeep Wrangler, and Jeep Grand Cherokee rear axle service where Trac-Lok or limited-slip operation is specified.
Key Features
- Brand: Dana Spicer
- Part number: 74210X
- Brand line: FSGR
- Rear differential carrier for Dana 35 axle applications
- Loaded carrier with bearings included
- Trac-Lok differential type
- Axle shaft spline quantity: 27
- Axle spline diameter: 1.18 in.
- Differential case split: 3.54 and up
- Cover bolt quantity: 10
Product Details
This Dana Spicer differential carrier is engineered for rear Dana 35 axle service and is built to the same standards used for original equipment parts. The FSGR line supports Jeep rear axle repairs where the factory setup uses spider gears and, in many applications, Trac-Lok or limited-slip differential operation. If you are replacing a worn carrier in a Jeep Cherokee, Jeep Wrangler, or Jeep Grand Cherokee, the 74210X provides the correct OE-style fitment for listed Dana 35 applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Worn or noisy rear differential carrier components
- Loss of limited-slip or Trac-Lok performance
- Damage to spider gear carrier assemblies
- Rear axle service needs on Dana 35-equipped Jeep vehicles
- Replacement of an OE-style carrier in high-mileage driveline repairs
Installation Notes and Fitment
Fits 2001 Jeep Cherokee, rear, with Limited Slip Differential; with Spider Gears; To 10/01/2000; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 1997-2001 Jeep TJ, rear, with Spider Gears; with Trac-Lok Differential; Replaces OE Part Number(s) 5252496; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 2001 Jeep Wrangler, rear, with Spider Gears; without Limited Slip Differential; To 10/01/2000; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; FSGR.
Fits 1987-2000 Jeep Cherokee, rear, with Spider Gears; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; with Limited Slip Differential; FSGR.
Fits 1997-2000 Jeep Wrangler, rear, with Trac-Lok Differential; with 3.55 Gear Ratio; with 3.73 Gear Ratio; with 4.11 Gear Ratio; with Dana 35 Axle; with Spider Gears; FSGR.
Fits 1994-1998 Jeep Grand Cherokee, rear, with Dana 35 Axle; with Limited Slip Differential; with Spider Gears; FSGR.
Fits 1987-1995 Jeep Wrangler, rear, with Dana 35 Axle; with Spider Gears; with Trac-Lok Differential; FSGR.
Fits 1993 Jeep Grand Cherokee, rear, with Limited Slip Differential; with Spider Gears; FSGR.
Fits 1985-1986 Jeep Cherokee, rear, with Limited Slip Differential; with Spider Gears; FSGR.
Verify axle model, gear ratio, and differential type before installation. This carrier is for rear Dana 35 applications only and should be matched to the vehicle’s existing axle configuration.
Quality Assurance
Genuine Spicer light vehicle axle products are manufactured to OE-level standards because they are OE parts. Dana continues to develop Spicer axle components with the goal of meeting or exceeding original equipment performance and reliability for listed Jeep rear axle applications.
