Dorman 242-6019 Bumper - Front Center
Dorman 242-6019 Replacement Bumper
Dorman 242-6019 is a specific-fit replacement bumper built to restore the vehicle’s original appearance while supporting safety inspection requirements. Made from plastic with a gray finish, it is shaped to match OE fit and appearance for a clean body repair on the correct application.
This bumper includes a step pad and mounting hardware, and it is approved to meet government safety standards. For buyers searching for a replacement bumper for Cascadia applications, Dorman 242-6019 provides a direct-fit body component with the dimensions and mounting layout needed for a proper install.
Key Features
- Specific-fit replacement bumper for the correct vehicle application
- Plastic construction with gray finish
- OE-style fit and appearance for body repair work
- Government safety standards approved
- Step pad included
- Mounting hardware included
- Mounting hole quantity: 4
- Package contents: bumper, screws, and washers
Detailed Description
Built as a standard-grade body replacement, Dorman 242-6019 is designed to replace a damaged or worn bumper without changing the vehicle’s original look. The bumper measures 60 inches long, 14 inches high, and 12.5 inches deep, with a material thickness of 0.15. It uses a specific fit design, a gray finish, and a plastic construction to align with the original equipment style. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For shoppers comparing bumper replacement options for Cascadia, this part number 242-6019 is a practical choice when the goal is to restore front or rear body appearance while keeping the vehicle aligned with inspection requirements. Dorman 242-6019 is also a useful search term for buyers looking for a Dorman bumper replacement with OE-style dimensions and mounting points.
What It Helps Solve
- Cracked or damaged bumper replacement
- Loss of original exterior appearance after impact
- Inspection issues related to a missing or noncompliant bumper
- Mismatch from prior body repair work
- Need for a direct-fit bumper for Cascadia body repair
Installation Notes and Tips
Verify the vehicle application before ordering, since this bumper is listed as a specific fit part. Confirm mounting hole location, bumper dimensions, and body configuration against the original bumper before installation. Use the included screws and washers during assembly, and transfer any reusable trim or step-pad-related components as needed based on the vehicle setup.
Quality Assurance
Dorman manufactures this replacement bumper to match original equipment fit and appearance while meeting government safety standards. The part is built from quality materials for standard body repair use and is identified by part number 242-6019 for accurate ordering and catalog lookup.
Original: $247.77
-65%$247.77
$86.72Dorman 242-6019 Bumper - Front Center
Dorman 242-6019 Replacement Bumper
Dorman 242-6019 is a specific-fit replacement bumper built to restore the vehicle’s original appearance while supporting safety inspection requirements. Made from plastic with a gray finish, it is shaped to match OE fit and appearance for a clean body repair on the correct application.
This bumper includes a step pad and mounting hardware, and it is approved to meet government safety standards. For buyers searching for a replacement bumper for Cascadia applications, Dorman 242-6019 provides a direct-fit body component with the dimensions and mounting layout needed for a proper install.
Key Features
- Specific-fit replacement bumper for the correct vehicle application
- Plastic construction with gray finish
- OE-style fit and appearance for body repair work
- Government safety standards approved
- Step pad included
- Mounting hardware included
- Mounting hole quantity: 4
- Package contents: bumper, screws, and washers
Detailed Description
Built as a standard-grade body replacement, Dorman 242-6019 is designed to replace a damaged or worn bumper without changing the vehicle’s original look. The bumper measures 60 inches long, 14 inches high, and 12.5 inches deep, with a material thickness of 0.15. It uses a specific fit design, a gray finish, and a plastic construction to align with the original equipment style. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For shoppers comparing bumper replacement options for Cascadia, this part number 242-6019 is a practical choice when the goal is to restore front or rear body appearance while keeping the vehicle aligned with inspection requirements. Dorman 242-6019 is also a useful search term for buyers looking for a Dorman bumper replacement with OE-style dimensions and mounting points.
What It Helps Solve
- Cracked or damaged bumper replacement
- Loss of original exterior appearance after impact
- Inspection issues related to a missing or noncompliant bumper
- Mismatch from prior body repair work
- Need for a direct-fit bumper for Cascadia body repair
Installation Notes and Tips
Verify the vehicle application before ordering, since this bumper is listed as a specific fit part. Confirm mounting hole location, bumper dimensions, and body configuration against the original bumper before installation. Use the included screws and washers during assembly, and transfer any reusable trim or step-pad-related components as needed based on the vehicle setup.
Quality Assurance
Dorman manufactures this replacement bumper to match original equipment fit and appearance while meeting government safety standards. The part is built from quality materials for standard body repair use and is identified by part number 242-6019 for accurate ordering and catalog lookup.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 242-6019 Replacement Bumper
Dorman 242-6019 is a specific-fit replacement bumper built to restore the vehicle’s original appearance while supporting safety inspection requirements. Made from plastic with a gray finish, it is shaped to match OE fit and appearance for a clean body repair on the correct application.
This bumper includes a step pad and mounting hardware, and it is approved to meet government safety standards. For buyers searching for a replacement bumper for Cascadia applications, Dorman 242-6019 provides a direct-fit body component with the dimensions and mounting layout needed for a proper install.
Key Features
- Specific-fit replacement bumper for the correct vehicle application
- Plastic construction with gray finish
- OE-style fit and appearance for body repair work
- Government safety standards approved
- Step pad included
- Mounting hardware included
- Mounting hole quantity: 4
- Package contents: bumper, screws, and washers
Detailed Description
Built as a standard-grade body replacement, Dorman 242-6019 is designed to replace a damaged or worn bumper without changing the vehicle’s original look. The bumper measures 60 inches long, 14 inches high, and 12.5 inches deep, with a material thickness of 0.15. It uses a specific fit design, a gray finish, and a plastic construction to align with the original equipment style. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For shoppers comparing bumper replacement options for Cascadia, this part number 242-6019 is a practical choice when the goal is to restore front or rear body appearance while keeping the vehicle aligned with inspection requirements. Dorman 242-6019 is also a useful search term for buyers looking for a Dorman bumper replacement with OE-style dimensions and mounting points.
What It Helps Solve
- Cracked or damaged bumper replacement
- Loss of original exterior appearance after impact
- Inspection issues related to a missing or noncompliant bumper
- Mismatch from prior body repair work
- Need for a direct-fit bumper for Cascadia body repair
Installation Notes and Tips
Verify the vehicle application before ordering, since this bumper is listed as a specific fit part. Confirm mounting hole location, bumper dimensions, and body configuration against the original bumper before installation. Use the included screws and washers during assembly, and transfer any reusable trim or step-pad-related components as needed based on the vehicle setup.
Quality Assurance
Dorman manufactures this replacement bumper to match original equipment fit and appearance while meeting government safety standards. The part is built from quality materials for standard body repair use and is identified by part number 242-6019 for accurate ordering and catalog lookup.
