Dorman 242-6092 Bumper - Front
Replacement Bumper for OE-Style Repair
This Dorman bumper is a direct replacement body component built to restore the vehicle’s exterior appearance and help satisfy safety inspection requirements. Made from steel with a gray finish, Dorman 242-6092 is shaped to match the original equipment bumper for a specific fit and consistent alignment.
Compatible with select vehicle applications that use this bumper style, including Ford F-150 and related body repair needs where an OE-style steel bumper is required. The Dorman 242-6092 bumper is a practical choice when replacing a damaged front or rear bumper assembly with a part that follows factory dimensions and mounting points.
Key Features
- Steel construction for body repair durability
- Specific fit design for accurate replacement
- Gray finish for a clean service-ready appearance
- Government safety standards approved
- Matches original equipment fit and appearance
- Mount hole diameter: 0.6 in and 0.7 in
- Standard grade replacement bumper
- Package contents: 1 bumper
Detailed Description
Dorman 242-6092 is a replacement bumper engineered for vehicles that require a steel OE-style bumper with the correct length, height, depth, and mounting layout. With a 92-inch length, 15-inch height, and 19-inch depth, this bumper is built to follow the original profile closely so the repaired vehicle maintains proper body lines and a factory-like look. The specific-fit design helps ensure the bumper aligns with the intended mounting locations and supports a clean installation on the correct application.
This part cross-references 3610935C2 for the same application. For buyers searching for a Ford F-150 bumper replacement, OE-style steel bumper, or Dorman 242-6092 body repair part, this component provides a direct replacement path without changing the vehicle’s original appearance.
What This Bumper Helps Address
- Visible damage from a collision or impact
- Corrosion or wear on an original bumper
- Failed safety inspection due to bumper condition
- Misaligned body appearance after front-end or rear-end repair
- Need for a specific-fit steel bumper replacement
Installation Notes and Tips
Verify the vehicle’s bumper style, mounting hole diameter, and overall dimensions before installation. This bumper does not include mounting hardware, lighting ports, or a step pad, so reuse or source the required related components separately as needed. Because fitment is specific, confirm the application against the vehicle’s original bumper configuration before beginning body repair work.
Quality Assurance
Dorman manufactures this bumper as a standard replacement part built to match OE fit and appearance while meeting government safety standards. Dorman 242-6092 is intended for repair work where a factory-style steel bumper is required for the correct vehicle application.
Original: $657.64
-65%$657.64
$230.17Dorman 242-6092 Bumper - Front
Replacement Bumper for OE-Style Repair
This Dorman bumper is a direct replacement body component built to restore the vehicle’s exterior appearance and help satisfy safety inspection requirements. Made from steel with a gray finish, Dorman 242-6092 is shaped to match the original equipment bumper for a specific fit and consistent alignment.
Compatible with select vehicle applications that use this bumper style, including Ford F-150 and related body repair needs where an OE-style steel bumper is required. The Dorman 242-6092 bumper is a practical choice when replacing a damaged front or rear bumper assembly with a part that follows factory dimensions and mounting points.
Key Features
- Steel construction for body repair durability
- Specific fit design for accurate replacement
- Gray finish for a clean service-ready appearance
- Government safety standards approved
- Matches original equipment fit and appearance
- Mount hole diameter: 0.6 in and 0.7 in
- Standard grade replacement bumper
- Package contents: 1 bumper
Detailed Description
Dorman 242-6092 is a replacement bumper engineered for vehicles that require a steel OE-style bumper with the correct length, height, depth, and mounting layout. With a 92-inch length, 15-inch height, and 19-inch depth, this bumper is built to follow the original profile closely so the repaired vehicle maintains proper body lines and a factory-like look. The specific-fit design helps ensure the bumper aligns with the intended mounting locations and supports a clean installation on the correct application.
This part cross-references 3610935C2 for the same application. For buyers searching for a Ford F-150 bumper replacement, OE-style steel bumper, or Dorman 242-6092 body repair part, this component provides a direct replacement path without changing the vehicle’s original appearance.
What This Bumper Helps Address
- Visible damage from a collision or impact
- Corrosion or wear on an original bumper
- Failed safety inspection due to bumper condition
- Misaligned body appearance after front-end or rear-end repair
- Need for a specific-fit steel bumper replacement
Installation Notes and Tips
Verify the vehicle’s bumper style, mounting hole diameter, and overall dimensions before installation. This bumper does not include mounting hardware, lighting ports, or a step pad, so reuse or source the required related components separately as needed. Because fitment is specific, confirm the application against the vehicle’s original bumper configuration before beginning body repair work.
Quality Assurance
Dorman manufactures this bumper as a standard replacement part built to match OE fit and appearance while meeting government safety standards. Dorman 242-6092 is intended for repair work where a factory-style steel bumper is required for the correct vehicle application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Replacement Bumper for OE-Style Repair
This Dorman bumper is a direct replacement body component built to restore the vehicle’s exterior appearance and help satisfy safety inspection requirements. Made from steel with a gray finish, Dorman 242-6092 is shaped to match the original equipment bumper for a specific fit and consistent alignment.
Compatible with select vehicle applications that use this bumper style, including Ford F-150 and related body repair needs where an OE-style steel bumper is required. The Dorman 242-6092 bumper is a practical choice when replacing a damaged front or rear bumper assembly with a part that follows factory dimensions and mounting points.
Key Features
- Steel construction for body repair durability
- Specific fit design for accurate replacement
- Gray finish for a clean service-ready appearance
- Government safety standards approved
- Matches original equipment fit and appearance
- Mount hole diameter: 0.6 in and 0.7 in
- Standard grade replacement bumper
- Package contents: 1 bumper
Detailed Description
Dorman 242-6092 is a replacement bumper engineered for vehicles that require a steel OE-style bumper with the correct length, height, depth, and mounting layout. With a 92-inch length, 15-inch height, and 19-inch depth, this bumper is built to follow the original profile closely so the repaired vehicle maintains proper body lines and a factory-like look. The specific-fit design helps ensure the bumper aligns with the intended mounting locations and supports a clean installation on the correct application.
This part cross-references 3610935C2 for the same application. For buyers searching for a Ford F-150 bumper replacement, OE-style steel bumper, or Dorman 242-6092 body repair part, this component provides a direct replacement path without changing the vehicle’s original appearance.
What This Bumper Helps Address
- Visible damage from a collision or impact
- Corrosion or wear on an original bumper
- Failed safety inspection due to bumper condition
- Misaligned body appearance after front-end or rear-end repair
- Need for a specific-fit steel bumper replacement
Installation Notes and Tips
Verify the vehicle’s bumper style, mounting hole diameter, and overall dimensions before installation. This bumper does not include mounting hardware, lighting ports, or a step pad, so reuse or source the required related components separately as needed. Because fitment is specific, confirm the application against the vehicle’s original bumper configuration before beginning body repair work.
Quality Assurance
Dorman manufactures this bumper as a standard replacement part built to match OE fit and appearance while meeting government safety standards. Dorman 242-6092 is intended for repair work where a factory-style steel bumper is required for the correct vehicle application.
