Dorman 533-108 Alignment Cam Bolt Kit - Front, Front Lower Strut Mount or Rear
Dorman 533-108 Alignment Cam Bolt Kit
Dorman 533-108 is an alignment cam bolt kit built for precise manual camber adjustment on select front and rear suspension applications. It is engineered and tested as a direct replacement for original equipment hardware on vehicles such as Buick LeSabre, Cadillac DeVille, and Pontiac Bonneville.
Key Features
- Manual camber adjustment for suspension alignment correction
- Adjustment range of +/- 2.25 degrees
- 16 mm bolt thread diameter with 2.0 mm thread pitch
- 10.9 bolt grade for strength and durability
- Steel washer construction with silver finish
- Nut and washer included
- Cam dimensions: 38 mm diameter with 4.6 mm thickness
- Fits front, rear, and front lower strut mount applications listed below
Detailed Description
This alignment cam bolt kit is designed for vehicles that require camber correction after suspension service, strut replacement, or alignment work. Dorman 533-108 provides a manual adjustment solution for a wide range of GM and Chrysler applications, including Buick Lucerne, Oldsmobile Aurora, Cadillac Seville, and Chrysler 300M front lower strut mount locations. The hardware is sized for a 16 mm mounting hole and uses a 45 mm thread length with an 80 mm bolt length for the specified applications.
For fitment-focused searches, this part is commonly selected for front camber adjustment on Buick Century, Buick Regal, Chevrolet Lumina, Pontiac Grand Am, and Oldsmobile Cutlass Ciera, as well as rear camber adjustment on select Buick LeSabre, Pontiac Bonneville, and Oldsmobile 88 models. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Correct
- Camber misalignment after suspension repairs
- Uneven tire wear caused by incorrect wheel angle settings
- Steering pull related to front suspension geometry
- Alignment issues after strut or control arm service
- Factory hardware replacement on worn or damaged cam bolts
Installation Notes and Tips
Install Dorman 533-108 in the exact position listed for your vehicle: front, rear, or front lower strut mount. Verify the mounting hole diameter, bolt thread diameter, and cam orientation before tightening. Final camber settings should be checked on an alignment rack after installation. For fitment searches, this kit applies to vehicles such as 2006-2008 Buick Lucerne, 1991-2005 Buick Park Avenue, and 1988-1997 Cadillac Seville in the listed positions.
Quality Assurance
Dorman states this alignment cam bolt kit is precision-engineered and rigorously tested to replace original equipment hardware on specific vehicles. The part number is 533-108.
Dorman 533-108 Alignment Cam Bolt Kit - Front, Front Lower Strut Mount or Rear
Dorman 533-108 Alignment Cam Bolt Kit
Dorman 533-108 is an alignment cam bolt kit built for precise manual camber adjustment on select front and rear suspension applications. It is engineered and tested as a direct replacement for original equipment hardware on vehicles such as Buick LeSabre, Cadillac DeVille, and Pontiac Bonneville.
Key Features
- Manual camber adjustment for suspension alignment correction
- Adjustment range of +/- 2.25 degrees
- 16 mm bolt thread diameter with 2.0 mm thread pitch
- 10.9 bolt grade for strength and durability
- Steel washer construction with silver finish
- Nut and washer included
- Cam dimensions: 38 mm diameter with 4.6 mm thickness
- Fits front, rear, and front lower strut mount applications listed below
Detailed Description
This alignment cam bolt kit is designed for vehicles that require camber correction after suspension service, strut replacement, or alignment work. Dorman 533-108 provides a manual adjustment solution for a wide range of GM and Chrysler applications, including Buick Lucerne, Oldsmobile Aurora, Cadillac Seville, and Chrysler 300M front lower strut mount locations. The hardware is sized for a 16 mm mounting hole and uses a 45 mm thread length with an 80 mm bolt length for the specified applications.
For fitment-focused searches, this part is commonly selected for front camber adjustment on Buick Century, Buick Regal, Chevrolet Lumina, Pontiac Grand Am, and Oldsmobile Cutlass Ciera, as well as rear camber adjustment on select Buick LeSabre, Pontiac Bonneville, and Oldsmobile 88 models. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Correct
- Camber misalignment after suspension repairs
- Uneven tire wear caused by incorrect wheel angle settings
- Steering pull related to front suspension geometry
- Alignment issues after strut or control arm service
- Factory hardware replacement on worn or damaged cam bolts
Installation Notes and Tips
Install Dorman 533-108 in the exact position listed for your vehicle: front, rear, or front lower strut mount. Verify the mounting hole diameter, bolt thread diameter, and cam orientation before tightening. Final camber settings should be checked on an alignment rack after installation. For fitment searches, this kit applies to vehicles such as 2006-2008 Buick Lucerne, 1991-2005 Buick Park Avenue, and 1988-1997 Cadillac Seville in the listed positions.
Quality Assurance
Dorman states this alignment cam bolt kit is precision-engineered and rigorously tested to replace original equipment hardware on specific vehicles. The part number is 533-108.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-108 Alignment Cam Bolt Kit
Dorman 533-108 is an alignment cam bolt kit built for precise manual camber adjustment on select front and rear suspension applications. It is engineered and tested as a direct replacement for original equipment hardware on vehicles such as Buick LeSabre, Cadillac DeVille, and Pontiac Bonneville.
Key Features
- Manual camber adjustment for suspension alignment correction
- Adjustment range of +/- 2.25 degrees
- 16 mm bolt thread diameter with 2.0 mm thread pitch
- 10.9 bolt grade for strength and durability
- Steel washer construction with silver finish
- Nut and washer included
- Cam dimensions: 38 mm diameter with 4.6 mm thickness
- Fits front, rear, and front lower strut mount applications listed below
Detailed Description
This alignment cam bolt kit is designed for vehicles that require camber correction after suspension service, strut replacement, or alignment work. Dorman 533-108 provides a manual adjustment solution for a wide range of GM and Chrysler applications, including Buick Lucerne, Oldsmobile Aurora, Cadillac Seville, and Chrysler 300M front lower strut mount locations. The hardware is sized for a 16 mm mounting hole and uses a 45 mm thread length with an 80 mm bolt length for the specified applications.
For fitment-focused searches, this part is commonly selected for front camber adjustment on Buick Century, Buick Regal, Chevrolet Lumina, Pontiac Grand Am, and Oldsmobile Cutlass Ciera, as well as rear camber adjustment on select Buick LeSabre, Pontiac Bonneville, and Oldsmobile 88 models. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Correct
- Camber misalignment after suspension repairs
- Uneven tire wear caused by incorrect wheel angle settings
- Steering pull related to front suspension geometry
- Alignment issues after strut or control arm service
- Factory hardware replacement on worn or damaged cam bolts
Installation Notes and Tips
Install Dorman 533-108 in the exact position listed for your vehicle: front, rear, or front lower strut mount. Verify the mounting hole diameter, bolt thread diameter, and cam orientation before tightening. Final camber settings should be checked on an alignment rack after installation. For fitment searches, this kit applies to vehicles such as 2006-2008 Buick Lucerne, 1991-2005 Buick Park Avenue, and 1988-1997 Cadillac Seville in the listed positions.
Quality Assurance
Dorman states this alignment cam bolt kit is precision-engineered and rigorously tested to replace original equipment hardware on specific vehicles. The part number is 533-108.
