Dorman 533-119 Alignment Cam Bolt Kit - Front Lower Strut Mount or Rear Lower Strut Mount
Dorman 533-119 Alignment Cam Bolt Kit
Dorman 533-119 is a manual alignment cam bolt kit for front lower strut mount applications and select rear lower strut mount applications. It is precision-engineered and tested as a direct replacement for the original hardware on specific vehicles, including many Honda Civic, Ford Mustang, and Toyota RAV4 fitments.
Key Features
- Manual cam adjustment for alignment correction
- Black finish with steel washer construction
- Bolt grade 12.9 for high-strength service
- 14 mm bolt thread diameter with 2.0 mm pitch
- 80 mm bolt length and 50 mm thread length
- Adjustment range of +/- 1.75 degrees
- Nut and washer included
- Fits front lower strut mount and select rear lower strut mount locations
Detailed Description
This alignment cam bolt kit is built for suspension alignment service where factory cam hardware is worn, seized, or no longer provides enough adjustment. The single-offset design supports precise camber correction on a wide range of vehicles, from late-model Cadillac CT4 and CT5 to long-running applications such as Chevrolet Camaro, Ford Edge, Ford Explorer, and Toyota RAV4. Dorman 533-119 is also cross-referenced to Delphi TAL10017 for the same application.
Use this kit when replacing damaged eccentric hardware or restoring alignment range after suspension work. The cam washer, lock nut, and high-strength bolt are sized for manual adjustment and repeatable positioning during alignment setup. For shoppers searching for an alignment cam bolt kit for Honda CR-V, Acura RDX, or Mazda CX-5 front lower strut mount service, this part number is a direct-fit option on listed applications.
What It Is Used For
- Restoring camber adjustment after suspension repairs
- Replacing worn or corroded factory cam bolts
- Correcting alignment issues after strut or control arm service
- Recovering adjustment range on vehicles with single-offset cam hardware
- Addressing uneven tire wear caused by improper front suspension alignment
Installation Notes and Tips
Install only on the listed vehicle applications and positions. Verify the front lower strut mount or rear lower strut mount location before assembly, and follow alignment procedures after installation. Because this is manual adjustment hardware, final camber settings should be checked on an alignment rack after the suspension is tightened to specification.
Quality Assurance
Dorman designs this replacement hardware to match original equipment function on specific vehicles and subjects it to testing for reliable service. The part number is 533-119.
Compatible Vehicles
- Fits 2020-2023 Cadillac CT4, front lower strut mount
- Fits 2020-2023 Cadillac CT5, front lower strut mount
- Fits 2010-2023 Chevrolet Camaro, front lower strut mount
- Fits 2007-2023 Ford Edge, front lower strut mount
- Fits 2011-2023 Ford Explorer, front lower strut mount
- Fits 1979-2023 Ford Mustang, front lower strut mount
- Fits 2019-2023 Toyota RAV4, front lower strut mount
- Fits 2002-2015 Honda Civic, front lower strut mount
- Fits 2002-2016 Honda CR-V, front lower strut mount
- Fits 2013-2023 Mazda CX-5, front lower strut mount
Dorman 533-119 Alignment Cam Bolt Kit - Front Lower Strut Mount or Rear Lower Strut Mount
Dorman 533-119 Alignment Cam Bolt Kit
Dorman 533-119 is a manual alignment cam bolt kit for front lower strut mount applications and select rear lower strut mount applications. It is precision-engineered and tested as a direct replacement for the original hardware on specific vehicles, including many Honda Civic, Ford Mustang, and Toyota RAV4 fitments.
Key Features
- Manual cam adjustment for alignment correction
- Black finish with steel washer construction
- Bolt grade 12.9 for high-strength service
- 14 mm bolt thread diameter with 2.0 mm pitch
- 80 mm bolt length and 50 mm thread length
- Adjustment range of +/- 1.75 degrees
- Nut and washer included
- Fits front lower strut mount and select rear lower strut mount locations
Detailed Description
This alignment cam bolt kit is built for suspension alignment service where factory cam hardware is worn, seized, or no longer provides enough adjustment. The single-offset design supports precise camber correction on a wide range of vehicles, from late-model Cadillac CT4 and CT5 to long-running applications such as Chevrolet Camaro, Ford Edge, Ford Explorer, and Toyota RAV4. Dorman 533-119 is also cross-referenced to Delphi TAL10017 for the same application.
Use this kit when replacing damaged eccentric hardware or restoring alignment range after suspension work. The cam washer, lock nut, and high-strength bolt are sized for manual adjustment and repeatable positioning during alignment setup. For shoppers searching for an alignment cam bolt kit for Honda CR-V, Acura RDX, or Mazda CX-5 front lower strut mount service, this part number is a direct-fit option on listed applications.
What It Is Used For
- Restoring camber adjustment after suspension repairs
- Replacing worn or corroded factory cam bolts
- Correcting alignment issues after strut or control arm service
- Recovering adjustment range on vehicles with single-offset cam hardware
- Addressing uneven tire wear caused by improper front suspension alignment
Installation Notes and Tips
Install only on the listed vehicle applications and positions. Verify the front lower strut mount or rear lower strut mount location before assembly, and follow alignment procedures after installation. Because this is manual adjustment hardware, final camber settings should be checked on an alignment rack after the suspension is tightened to specification.
Quality Assurance
Dorman designs this replacement hardware to match original equipment function on specific vehicles and subjects it to testing for reliable service. The part number is 533-119.
Compatible Vehicles
- Fits 2020-2023 Cadillac CT4, front lower strut mount
- Fits 2020-2023 Cadillac CT5, front lower strut mount
- Fits 2010-2023 Chevrolet Camaro, front lower strut mount
- Fits 2007-2023 Ford Edge, front lower strut mount
- Fits 2011-2023 Ford Explorer, front lower strut mount
- Fits 1979-2023 Ford Mustang, front lower strut mount
- Fits 2019-2023 Toyota RAV4, front lower strut mount
- Fits 2002-2015 Honda Civic, front lower strut mount
- Fits 2002-2016 Honda CR-V, front lower strut mount
- Fits 2013-2023 Mazda CX-5, front lower strut mount
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-119 Alignment Cam Bolt Kit
Dorman 533-119 is a manual alignment cam bolt kit for front lower strut mount applications and select rear lower strut mount applications. It is precision-engineered and tested as a direct replacement for the original hardware on specific vehicles, including many Honda Civic, Ford Mustang, and Toyota RAV4 fitments.
Key Features
- Manual cam adjustment for alignment correction
- Black finish with steel washer construction
- Bolt grade 12.9 for high-strength service
- 14 mm bolt thread diameter with 2.0 mm pitch
- 80 mm bolt length and 50 mm thread length
- Adjustment range of +/- 1.75 degrees
- Nut and washer included
- Fits front lower strut mount and select rear lower strut mount locations
Detailed Description
This alignment cam bolt kit is built for suspension alignment service where factory cam hardware is worn, seized, or no longer provides enough adjustment. The single-offset design supports precise camber correction on a wide range of vehicles, from late-model Cadillac CT4 and CT5 to long-running applications such as Chevrolet Camaro, Ford Edge, Ford Explorer, and Toyota RAV4. Dorman 533-119 is also cross-referenced to Delphi TAL10017 for the same application.
Use this kit when replacing damaged eccentric hardware or restoring alignment range after suspension work. The cam washer, lock nut, and high-strength bolt are sized for manual adjustment and repeatable positioning during alignment setup. For shoppers searching for an alignment cam bolt kit for Honda CR-V, Acura RDX, or Mazda CX-5 front lower strut mount service, this part number is a direct-fit option on listed applications.
What It Is Used For
- Restoring camber adjustment after suspension repairs
- Replacing worn or corroded factory cam bolts
- Correcting alignment issues after strut or control arm service
- Recovering adjustment range on vehicles with single-offset cam hardware
- Addressing uneven tire wear caused by improper front suspension alignment
Installation Notes and Tips
Install only on the listed vehicle applications and positions. Verify the front lower strut mount or rear lower strut mount location before assembly, and follow alignment procedures after installation. Because this is manual adjustment hardware, final camber settings should be checked on an alignment rack after the suspension is tightened to specification.
Quality Assurance
Dorman designs this replacement hardware to match original equipment function on specific vehicles and subjects it to testing for reliable service. The part number is 533-119.
Compatible Vehicles
- Fits 2020-2023 Cadillac CT4, front lower strut mount
- Fits 2020-2023 Cadillac CT5, front lower strut mount
- Fits 2010-2023 Chevrolet Camaro, front lower strut mount
- Fits 2007-2023 Ford Edge, front lower strut mount
- Fits 2011-2023 Ford Explorer, front lower strut mount
- Fits 1979-2023 Ford Mustang, front lower strut mount
- Fits 2019-2023 Toyota RAV4, front lower strut mount
- Fits 2002-2015 Honda Civic, front lower strut mount
- Fits 2002-2016 Honda CR-V, front lower strut mount
- Fits 2013-2023 Mazda CX-5, front lower strut mount
