Dorman 533-567 Suspension Stabilizer Bar Bushing - Front To Control Arm
Dorman 533-567 Stabilizer Bar Bushing
Dorman 533-567 is a specific-fit suspension stabilizer bar bushing for select Ford E-Series applications. It is precision-engineered and tested to replace the original equipment bushing on the front-to-control-arm location, helping restore proper sway bar support on vehicles such as the Ford E-150 and Ford E-350.
Key Features
- Specific-fit suspension stabilizer bar bushing for select Ford vans and wagons
- Front to control arm application for OE-style placement
- Rubber and steel construction for the original rubber design
- Black finish
- Standard replacement grade
- Bar diameter: 23 mm
- Inside diameter: 21.5 mm
- Outside diameter: 46.2 mm
- Cross-references MOOG Chassis Products K8645 and Mevotech Supreme MK8645 for the same application
Detailed Description
This Dorman suspension stabilizer bar bushing, part number 533-567, is built for direct replacement on select Ford E-150, E-250, E-350, Econoline, Econoline Van, Econoline Wagon, and Club Wagon models. It is designed around the original rubber design and uses rubber with steel reinforcement to match the OE-style mounting point at the front control arm. For buyers searching for a Ford E-150 front stabilizer bar bushing or a Ford E-350 front control arm sway bar bushing, 533-567 provides a specific-fit solution.
Compatible With 2003-2014 Ford E-150, front to control arm; 2010-2014 Ford Econoline Van, front to control arm; 2010-2014 Ford Econoline Wagon, front to control arm; 2007-2008 Ford E-150 Econoline, front to control arm; 1992-2002 Ford E-150 Econoline, front to control arm; 2007-2008 Ford E-350 Econoline, front to control arm; 1992-2000 Ford E-350 Econoline, front to control arm; 2003-2007 Ford E-250, front to control arm; 1999-2007 Ford E-350 Super Duty, front to control arm; 2003-2005 Ford E-150 Club Wagon, front to control arm; 2003-2005 Ford E-350 Club Wagon, front to control arm; 1999-2003 Ford Econoline, front to control arm; 1992-2002 Ford E-150 Econoline Club Wagon, front to control arm; 1992-2002 Ford E-250 Econoline, front to control arm; 1992-2002 Ford E-350 Econoline Club Wagon, front to control arm.
What It Helps Address
- Clunking or knocking from worn sway bar bushings
- Excessive play at the stabilizer bar mounting point
- Loose or inconsistent front-end feel over bumps
- Rubber deterioration from age and road exposure
- OE bushing wear on high-mileage Ford E-Series suspension systems
Installation Notes and Tips
Verify the bar diameter and mounting location before installation; this part is specified for a 23 mm stabilizer bar and a front-to-control-arm position. Inspect the stabilizer bar, control arm contact area, and surrounding hardware for wear before reassembly. Because mounting hardware and brackets are not included, reuse or replace related components as needed based on condition.
Quality Assurance
Dorman designs this bushing as a standard replacement part and subjects it to engineering review and testing to support reliable OE-style service on the listed Ford applications. Part number 533-567 is built to match the original rubber design for the specified vehicles.
Dorman 533-567 Suspension Stabilizer Bar Bushing - Front To Control Arm
Dorman 533-567 Stabilizer Bar Bushing
Dorman 533-567 is a specific-fit suspension stabilizer bar bushing for select Ford E-Series applications. It is precision-engineered and tested to replace the original equipment bushing on the front-to-control-arm location, helping restore proper sway bar support on vehicles such as the Ford E-150 and Ford E-350.
Key Features
- Specific-fit suspension stabilizer bar bushing for select Ford vans and wagons
- Front to control arm application for OE-style placement
- Rubber and steel construction for the original rubber design
- Black finish
- Standard replacement grade
- Bar diameter: 23 mm
- Inside diameter: 21.5 mm
- Outside diameter: 46.2 mm
- Cross-references MOOG Chassis Products K8645 and Mevotech Supreme MK8645 for the same application
Detailed Description
This Dorman suspension stabilizer bar bushing, part number 533-567, is built for direct replacement on select Ford E-150, E-250, E-350, Econoline, Econoline Van, Econoline Wagon, and Club Wagon models. It is designed around the original rubber design and uses rubber with steel reinforcement to match the OE-style mounting point at the front control arm. For buyers searching for a Ford E-150 front stabilizer bar bushing or a Ford E-350 front control arm sway bar bushing, 533-567 provides a specific-fit solution.
Compatible With 2003-2014 Ford E-150, front to control arm; 2010-2014 Ford Econoline Van, front to control arm; 2010-2014 Ford Econoline Wagon, front to control arm; 2007-2008 Ford E-150 Econoline, front to control arm; 1992-2002 Ford E-150 Econoline, front to control arm; 2007-2008 Ford E-350 Econoline, front to control arm; 1992-2000 Ford E-350 Econoline, front to control arm; 2003-2007 Ford E-250, front to control arm; 1999-2007 Ford E-350 Super Duty, front to control arm; 2003-2005 Ford E-150 Club Wagon, front to control arm; 2003-2005 Ford E-350 Club Wagon, front to control arm; 1999-2003 Ford Econoline, front to control arm; 1992-2002 Ford E-150 Econoline Club Wagon, front to control arm; 1992-2002 Ford E-250 Econoline, front to control arm; 1992-2002 Ford E-350 Econoline Club Wagon, front to control arm.
What It Helps Address
- Clunking or knocking from worn sway bar bushings
- Excessive play at the stabilizer bar mounting point
- Loose or inconsistent front-end feel over bumps
- Rubber deterioration from age and road exposure
- OE bushing wear on high-mileage Ford E-Series suspension systems
Installation Notes and Tips
Verify the bar diameter and mounting location before installation; this part is specified for a 23 mm stabilizer bar and a front-to-control-arm position. Inspect the stabilizer bar, control arm contact area, and surrounding hardware for wear before reassembly. Because mounting hardware and brackets are not included, reuse or replace related components as needed based on condition.
Quality Assurance
Dorman designs this bushing as a standard replacement part and subjects it to engineering review and testing to support reliable OE-style service on the listed Ford applications. Part number 533-567 is built to match the original rubber design for the specified vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-567 Stabilizer Bar Bushing
Dorman 533-567 is a specific-fit suspension stabilizer bar bushing for select Ford E-Series applications. It is precision-engineered and tested to replace the original equipment bushing on the front-to-control-arm location, helping restore proper sway bar support on vehicles such as the Ford E-150 and Ford E-350.
Key Features
- Specific-fit suspension stabilizer bar bushing for select Ford vans and wagons
- Front to control arm application for OE-style placement
- Rubber and steel construction for the original rubber design
- Black finish
- Standard replacement grade
- Bar diameter: 23 mm
- Inside diameter: 21.5 mm
- Outside diameter: 46.2 mm
- Cross-references MOOG Chassis Products K8645 and Mevotech Supreme MK8645 for the same application
Detailed Description
This Dorman suspension stabilizer bar bushing, part number 533-567, is built for direct replacement on select Ford E-150, E-250, E-350, Econoline, Econoline Van, Econoline Wagon, and Club Wagon models. It is designed around the original rubber design and uses rubber with steel reinforcement to match the OE-style mounting point at the front control arm. For buyers searching for a Ford E-150 front stabilizer bar bushing or a Ford E-350 front control arm sway bar bushing, 533-567 provides a specific-fit solution.
Compatible With 2003-2014 Ford E-150, front to control arm; 2010-2014 Ford Econoline Van, front to control arm; 2010-2014 Ford Econoline Wagon, front to control arm; 2007-2008 Ford E-150 Econoline, front to control arm; 1992-2002 Ford E-150 Econoline, front to control arm; 2007-2008 Ford E-350 Econoline, front to control arm; 1992-2000 Ford E-350 Econoline, front to control arm; 2003-2007 Ford E-250, front to control arm; 1999-2007 Ford E-350 Super Duty, front to control arm; 2003-2005 Ford E-150 Club Wagon, front to control arm; 2003-2005 Ford E-350 Club Wagon, front to control arm; 1999-2003 Ford Econoline, front to control arm; 1992-2002 Ford E-150 Econoline Club Wagon, front to control arm; 1992-2002 Ford E-250 Econoline, front to control arm; 1992-2002 Ford E-350 Econoline Club Wagon, front to control arm.
What It Helps Address
- Clunking or knocking from worn sway bar bushings
- Excessive play at the stabilizer bar mounting point
- Loose or inconsistent front-end feel over bumps
- Rubber deterioration from age and road exposure
- OE bushing wear on high-mileage Ford E-Series suspension systems
Installation Notes and Tips
Verify the bar diameter and mounting location before installation; this part is specified for a 23 mm stabilizer bar and a front-to-control-arm position. Inspect the stabilizer bar, control arm contact area, and surrounding hardware for wear before reassembly. Because mounting hardware and brackets are not included, reuse or replace related components as needed based on condition.
Quality Assurance
Dorman designs this bushing as a standard replacement part and subjects it to engineering review and testing to support reliable OE-style service on the listed Ford applications. Part number 533-567 is built to match the original rubber design for the specified vehicles.
