Dorman 535-787 Suspension Stabilizer Bar Bushing - Front
Dorman 535-787 Stabilizer Bar Bushing
Dorman 535-787 is a specific-fit suspension stabilizer bar bushing for front applications that require a 33 mm sway bar diameter. Built from rubber and engineered for OE-style replacement, it helps restore proper stabilizer bar support on select Chevrolet, GMC, Pontiac, Buick, and Oldsmobile vehicles.
Use this Dorman 535-787 bushing when servicing front suspension wear on vehicles such as the Chevrolet Lumina, GMC Yukon, and Pontiac Grand Prix. It is a direct-fit replacement for applications that call for a 33 mm front stabilizer bar bushing.
Key Features
- Specific-fit suspension stabilizer bar bushing for front use
- Rubber construction for standard OE-style service replacement
- 33 mm inside diameter for matched stabilizer bar fitment
- Blue finish with regular grade construction
- Designed for select Chevrolet, GMC, Pontiac, Buick, and Oldsmobile applications
- Part number 535-787 for easy identification
Detailed Description
This suspension stabilizer bar bushing is precision-engineered and tested to replace the original equipment bushing on specific vehicles. The rubber material helps maintain stabilizer bar location and support, while the 33 mm inside diameter matches the listed front sway bar applications. Dorman 535-787 is a practical choice for restoring front suspension function on vehicles including the Chevrolet Lumina, GMC Yukon, and Pontiac Grand Prix, as well as other listed GM platforms.
This part cross-references Monroe Shocks & Struts (e.g., 14094388) for the same application.
What It Helps Address
- Front suspension clunking caused by worn stabilizer bar bushings
- Excess sway bar movement from deteriorated rubber support
- Loose or imprecise front-end handling from bushing wear
- Noise during cornering or over uneven pavement
- Replacement needs on 33 mm front stabilizer bar setups
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering; this part is for 33 mm front applications only. Compare the original bushing dimensions and vehicle fitment details before installation. Clean the mounting surface and inspect the stabilizer bar and related hardware for wear or corrosion during service.
Quality Assurance
Dorman tests this replacement bushing for fit and function against the original equipment design on the listed vehicles. The part is built as a specific-fit replacement for dependable service on the applications shown.
- Fits 1990-2001 Chevrolet Lumina, front
- Fits 1992-2000 GMC Yukon, front
- Fits 1973-1996 Pontiac Grand Prix, front
- Fits 1992-1994 Chevrolet Blazer, front
- Fits 1986-1992 Chevrolet Camaro, front
- Fits 1980-1992 Oldsmobile Custom Cruiser, front
- Fits 1986-1992 Pontiac Firebird, front
- Fits 1978-1988 Chevrolet Monte Carlo, front
- Fits 1978-1988 Oldsmobile Cutlass Supreme, front
- Fits 1978-1987 Buick Regal, front
- Fits 1985-1987 Oldsmobile Cutlass, front
- Fits 1978-1981 Oldsmobile Cutlass, front
- Fits 1980-1985 Buick LeSabre, front
- Fits 1978-1984 Oldsmobile Cutlass Calais, front
- Fits 1980-1983 Oldsmobile Cutlass Cruiser, front
- Fits 1979-1980 Oldsmobile Cutlass Salon, front
Dorman 535-787 Suspension Stabilizer Bar Bushing - Front
Dorman 535-787 Stabilizer Bar Bushing
Dorman 535-787 is a specific-fit suspension stabilizer bar bushing for front applications that require a 33 mm sway bar diameter. Built from rubber and engineered for OE-style replacement, it helps restore proper stabilizer bar support on select Chevrolet, GMC, Pontiac, Buick, and Oldsmobile vehicles.
Use this Dorman 535-787 bushing when servicing front suspension wear on vehicles such as the Chevrolet Lumina, GMC Yukon, and Pontiac Grand Prix. It is a direct-fit replacement for applications that call for a 33 mm front stabilizer bar bushing.
Key Features
- Specific-fit suspension stabilizer bar bushing for front use
- Rubber construction for standard OE-style service replacement
- 33 mm inside diameter for matched stabilizer bar fitment
- Blue finish with regular grade construction
- Designed for select Chevrolet, GMC, Pontiac, Buick, and Oldsmobile applications
- Part number 535-787 for easy identification
Detailed Description
This suspension stabilizer bar bushing is precision-engineered and tested to replace the original equipment bushing on specific vehicles. The rubber material helps maintain stabilizer bar location and support, while the 33 mm inside diameter matches the listed front sway bar applications. Dorman 535-787 is a practical choice for restoring front suspension function on vehicles including the Chevrolet Lumina, GMC Yukon, and Pontiac Grand Prix, as well as other listed GM platforms.
This part cross-references Monroe Shocks & Struts (e.g., 14094388) for the same application.
What It Helps Address
- Front suspension clunking caused by worn stabilizer bar bushings
- Excess sway bar movement from deteriorated rubber support
- Loose or imprecise front-end handling from bushing wear
- Noise during cornering or over uneven pavement
- Replacement needs on 33 mm front stabilizer bar setups
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering; this part is for 33 mm front applications only. Compare the original bushing dimensions and vehicle fitment details before installation. Clean the mounting surface and inspect the stabilizer bar and related hardware for wear or corrosion during service.
Quality Assurance
Dorman tests this replacement bushing for fit and function against the original equipment design on the listed vehicles. The part is built as a specific-fit replacement for dependable service on the applications shown.
- Fits 1990-2001 Chevrolet Lumina, front
- Fits 1992-2000 GMC Yukon, front
- Fits 1973-1996 Pontiac Grand Prix, front
- Fits 1992-1994 Chevrolet Blazer, front
- Fits 1986-1992 Chevrolet Camaro, front
- Fits 1980-1992 Oldsmobile Custom Cruiser, front
- Fits 1986-1992 Pontiac Firebird, front
- Fits 1978-1988 Chevrolet Monte Carlo, front
- Fits 1978-1988 Oldsmobile Cutlass Supreme, front
- Fits 1978-1987 Buick Regal, front
- Fits 1985-1987 Oldsmobile Cutlass, front
- Fits 1978-1981 Oldsmobile Cutlass, front
- Fits 1980-1985 Buick LeSabre, front
- Fits 1978-1984 Oldsmobile Cutlass Calais, front
- Fits 1980-1983 Oldsmobile Cutlass Cruiser, front
- Fits 1979-1980 Oldsmobile Cutlass Salon, front
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 535-787 Stabilizer Bar Bushing
Dorman 535-787 is a specific-fit suspension stabilizer bar bushing for front applications that require a 33 mm sway bar diameter. Built from rubber and engineered for OE-style replacement, it helps restore proper stabilizer bar support on select Chevrolet, GMC, Pontiac, Buick, and Oldsmobile vehicles.
Use this Dorman 535-787 bushing when servicing front suspension wear on vehicles such as the Chevrolet Lumina, GMC Yukon, and Pontiac Grand Prix. It is a direct-fit replacement for applications that call for a 33 mm front stabilizer bar bushing.
Key Features
- Specific-fit suspension stabilizer bar bushing for front use
- Rubber construction for standard OE-style service replacement
- 33 mm inside diameter for matched stabilizer bar fitment
- Blue finish with regular grade construction
- Designed for select Chevrolet, GMC, Pontiac, Buick, and Oldsmobile applications
- Part number 535-787 for easy identification
Detailed Description
This suspension stabilizer bar bushing is precision-engineered and tested to replace the original equipment bushing on specific vehicles. The rubber material helps maintain stabilizer bar location and support, while the 33 mm inside diameter matches the listed front sway bar applications. Dorman 535-787 is a practical choice for restoring front suspension function on vehicles including the Chevrolet Lumina, GMC Yukon, and Pontiac Grand Prix, as well as other listed GM platforms.
This part cross-references Monroe Shocks & Struts (e.g., 14094388) for the same application.
What It Helps Address
- Front suspension clunking caused by worn stabilizer bar bushings
- Excess sway bar movement from deteriorated rubber support
- Loose or imprecise front-end handling from bushing wear
- Noise during cornering or over uneven pavement
- Replacement needs on 33 mm front stabilizer bar setups
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering; this part is for 33 mm front applications only. Compare the original bushing dimensions and vehicle fitment details before installation. Clean the mounting surface and inspect the stabilizer bar and related hardware for wear or corrosion during service.
Quality Assurance
Dorman tests this replacement bushing for fit and function against the original equipment design on the listed vehicles. The part is built as a specific-fit replacement for dependable service on the applications shown.
- Fits 1990-2001 Chevrolet Lumina, front
- Fits 1992-2000 GMC Yukon, front
- Fits 1973-1996 Pontiac Grand Prix, front
- Fits 1992-1994 Chevrolet Blazer, front
- Fits 1986-1992 Chevrolet Camaro, front
- Fits 1980-1992 Oldsmobile Custom Cruiser, front
- Fits 1986-1992 Pontiac Firebird, front
- Fits 1978-1988 Chevrolet Monte Carlo, front
- Fits 1978-1988 Oldsmobile Cutlass Supreme, front
- Fits 1978-1987 Buick Regal, front
- Fits 1985-1987 Oldsmobile Cutlass, front
- Fits 1978-1981 Oldsmobile Cutlass, front
- Fits 1980-1985 Buick LeSabre, front
- Fits 1978-1984 Oldsmobile Cutlass Calais, front
- Fits 1980-1983 Oldsmobile Cutlass Cruiser, front
- Fits 1979-1980 Oldsmobile Cutlass Salon, front
