Dorman 602-053 Wiper Linkage - Front
Wiper Linkage for Infiniti Front Wiper Repair
This Dorman windshield wiper linkage restores proper wiper motion on select Infiniti models when the original transmission wears out or fails. Built as a specific-fit replacement, Part Number 602-053 is engineered to match the function and performance of the factory linkage for dependable front wiper operation.
- Specific-fit replacement for select Infiniti applications
- Mechanical, bolt-on wiper transmission design
- Two-piece configuration with frame-style linkage bracket
- Black finish with plastic bushings
- Clockwise rotation direction
- Standard replacement grade for OE-style service
- Compatible with front and N/A-position applications listed below
Detailed Product Overview
Dorman 602-053 is a replacement windshield wiper linkage designed for select 2009-2019 Infiniti vehicles, including FX35, FX37, FX50, Q70, and QX70 applications. It is built to restore the connection between the wiper motor and the wiper arms so the system can move correctly across the windshield. This part number 602-053 is a direct-fit service component for vehicles that use a mechanical, bolt-on transmission with a 9.37 mm wiper arm pivot point diameter.
This part cross-references OE part number 288401CA0A for the same application.
Common Problems This Part Can Address
- Wipers that stop moving or move intermittently
- Loose, worn, or broken linkage joints
- Uneven or incomplete windshield sweep
- Noise or binding from the wiper transmission
- Loss of front wiper function on affected Infiniti models
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and position before installation. This linkage uses a bolt-on attachment method and is intended for vehicles with the matching mechanical wiper system. Inspect the wiper motor, pivots, and bushings during service so the new linkage is installed into a clean, properly aligned assembly. For Infiniti FX35, FX37, FX50, Q70, and QX70 repairs, confirm the original configuration matches the listed application before replacing the transmission.
- Fits 2014-2019 INFINITI QX70, N/A
- Fits 2014-2017 INFINITI Q70, Front
- Fits 2013 INFINITI FX37, Front
- Fits 2009-2013 INFINITI FX50, Front
- Fits 2009-2012 INFINITI FX35, Front
Quality Assurance
Dorman manufactures this wiper linkage as a standard replacement component for restoring original-style operation on select Infiniti vehicles. Part Number 602-053 is built to match the function and performance of the factory linkage for the listed applications.
Dorman 602-053 Wiper Linkage - Front
Wiper Linkage for Infiniti Front Wiper Repair
This Dorman windshield wiper linkage restores proper wiper motion on select Infiniti models when the original transmission wears out or fails. Built as a specific-fit replacement, Part Number 602-053 is engineered to match the function and performance of the factory linkage for dependable front wiper operation.
- Specific-fit replacement for select Infiniti applications
- Mechanical, bolt-on wiper transmission design
- Two-piece configuration with frame-style linkage bracket
- Black finish with plastic bushings
- Clockwise rotation direction
- Standard replacement grade for OE-style service
- Compatible with front and N/A-position applications listed below
Detailed Product Overview
Dorman 602-053 is a replacement windshield wiper linkage designed for select 2009-2019 Infiniti vehicles, including FX35, FX37, FX50, Q70, and QX70 applications. It is built to restore the connection between the wiper motor and the wiper arms so the system can move correctly across the windshield. This part number 602-053 is a direct-fit service component for vehicles that use a mechanical, bolt-on transmission with a 9.37 mm wiper arm pivot point diameter.
This part cross-references OE part number 288401CA0A for the same application.
Common Problems This Part Can Address
- Wipers that stop moving or move intermittently
- Loose, worn, or broken linkage joints
- Uneven or incomplete windshield sweep
- Noise or binding from the wiper transmission
- Loss of front wiper function on affected Infiniti models
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and position before installation. This linkage uses a bolt-on attachment method and is intended for vehicles with the matching mechanical wiper system. Inspect the wiper motor, pivots, and bushings during service so the new linkage is installed into a clean, properly aligned assembly. For Infiniti FX35, FX37, FX50, Q70, and QX70 repairs, confirm the original configuration matches the listed application before replacing the transmission.
- Fits 2014-2019 INFINITI QX70, N/A
- Fits 2014-2017 INFINITI Q70, Front
- Fits 2013 INFINITI FX37, Front
- Fits 2009-2013 INFINITI FX50, Front
- Fits 2009-2012 INFINITI FX35, Front
Quality Assurance
Dorman manufactures this wiper linkage as a standard replacement component for restoring original-style operation on select Infiniti vehicles. Part Number 602-053 is built to match the function and performance of the factory linkage for the listed applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Wiper Linkage for Infiniti Front Wiper Repair
This Dorman windshield wiper linkage restores proper wiper motion on select Infiniti models when the original transmission wears out or fails. Built as a specific-fit replacement, Part Number 602-053 is engineered to match the function and performance of the factory linkage for dependable front wiper operation.
- Specific-fit replacement for select Infiniti applications
- Mechanical, bolt-on wiper transmission design
- Two-piece configuration with frame-style linkage bracket
- Black finish with plastic bushings
- Clockwise rotation direction
- Standard replacement grade for OE-style service
- Compatible with front and N/A-position applications listed below
Detailed Product Overview
Dorman 602-053 is a replacement windshield wiper linkage designed for select 2009-2019 Infiniti vehicles, including FX35, FX37, FX50, Q70, and QX70 applications. It is built to restore the connection between the wiper motor and the wiper arms so the system can move correctly across the windshield. This part number 602-053 is a direct-fit service component for vehicles that use a mechanical, bolt-on transmission with a 9.37 mm wiper arm pivot point diameter.
This part cross-references OE part number 288401CA0A for the same application.
Common Problems This Part Can Address
- Wipers that stop moving or move intermittently
- Loose, worn, or broken linkage joints
- Uneven or incomplete windshield sweep
- Noise or binding from the wiper transmission
- Loss of front wiper function on affected Infiniti models
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and position before installation. This linkage uses a bolt-on attachment method and is intended for vehicles with the matching mechanical wiper system. Inspect the wiper motor, pivots, and bushings during service so the new linkage is installed into a clean, properly aligned assembly. For Infiniti FX35, FX37, FX50, Q70, and QX70 repairs, confirm the original configuration matches the listed application before replacing the transmission.
- Fits 2014-2019 INFINITI QX70, N/A
- Fits 2014-2017 INFINITI Q70, Front
- Fits 2013 INFINITI FX37, Front
- Fits 2009-2013 INFINITI FX50, Front
- Fits 2009-2012 INFINITI FX35, Front
Quality Assurance
Dorman manufactures this wiper linkage as a standard replacement component for restoring original-style operation on select Infiniti vehicles. Part Number 602-053 is built to match the function and performance of the factory linkage for the listed applications.
