Dorman 620-946 Engine Cooling Fan Assembly
Engine Cooling Fan Assembly for GM Applications
Dorman 620-946 is an engine cooling fan assembly built as a standard replacement for the stock radiator fan on select Cadillac, Chevrolet, and GMC vehicles. It is precision-engineered for fit and performance, with a brushless 12-volt motor, plastic housing, and integrated shroud to match the original cooling setup.
Compatible With 2017-2019 Cadillac XT5, 2019 Chevrolet Blazer, and 2017-2019 GMC Acadia without RPO Code V92 trailer provisions. This Dorman 620-946 cooling fan assembly is designed for direct replacement service where the original fan assembly has failed or no longer moves enough air through the radiator.
Key Features
- Engine cooling fan assembly with motor included
- 12-volt brushless motor for OE-style cooling operation
- Plastic fan housing and black shroud for a factory-style layout
- Single-fan design with integrated shroud
- Male blade-style connector with 1 connector and 1 terminal
- Standard replacement grade for direct-fit service
- Cross-references Four Seasons 75192 for the same application
Detailed Description
Dorman 620-946 is engineered to match the fit and cooling performance of the original radiator fan assembly on specific GM platforms. The assembly uses a black plastic shroud, black blade, and brushless motor design to support consistent airflow across the radiator and help maintain normal operating temperatures. With a 25.5-inch width and 22.8-inch height, it follows the OE-style packaging needed for proper clearance and mounting.
This part number is a direct-fit cooling solution for 2017-2019 Cadillac XT5, 2019 Chevrolet Blazer, and 2017-2019 GMC Acadia applications listed without RPO Code V92 trailer provisions. If you are searching for a Dorman 620-946 engine cooling fan assembly for Cadillac XT5, Chevrolet Blazer, or GMC Acadia cooling repair, this unit is built for those exact vehicle-year combinations.
What It Helps Address
- Overheating caused by a weak or inoperative radiator fan
- Reduced airflow through the radiator at idle or low speed
- Cooling fan noise from a worn motor or damaged assembly
- Fan operation issues tied to a failed OE-style cooling module
- Replacement needs after physical damage to the shroud or blades
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and the absence of RPO Code V92 trailer provisions before installation. Confirm the connector style, mounting layout, and available clearance against the original assembly. Because this is a direct replacement cooling fan assembly, transfer of unrelated hardware is not assumed and should be checked against the vehicle’s original configuration.
Quality Assurance
Dorman states that this engine cooling fan assembly is rigorously tested to confirm cooling performance comparable to the original part. The design is intended to deliver OE-style fit and function for the listed Cadillac XT5, Chevrolet Blazer, and GMC Acadia applications. Part number 620-946 is built as a standard replacement for service technicians and DIY repairs needing a dependable radiator fan assembly.
Original: $391.20
-65%$391.20
$136.92Dorman 620-946 Engine Cooling Fan Assembly
Engine Cooling Fan Assembly for GM Applications
Dorman 620-946 is an engine cooling fan assembly built as a standard replacement for the stock radiator fan on select Cadillac, Chevrolet, and GMC vehicles. It is precision-engineered for fit and performance, with a brushless 12-volt motor, plastic housing, and integrated shroud to match the original cooling setup.
Compatible With 2017-2019 Cadillac XT5, 2019 Chevrolet Blazer, and 2017-2019 GMC Acadia without RPO Code V92 trailer provisions. This Dorman 620-946 cooling fan assembly is designed for direct replacement service where the original fan assembly has failed or no longer moves enough air through the radiator.
Key Features
- Engine cooling fan assembly with motor included
- 12-volt brushless motor for OE-style cooling operation
- Plastic fan housing and black shroud for a factory-style layout
- Single-fan design with integrated shroud
- Male blade-style connector with 1 connector and 1 terminal
- Standard replacement grade for direct-fit service
- Cross-references Four Seasons 75192 for the same application
Detailed Description
Dorman 620-946 is engineered to match the fit and cooling performance of the original radiator fan assembly on specific GM platforms. The assembly uses a black plastic shroud, black blade, and brushless motor design to support consistent airflow across the radiator and help maintain normal operating temperatures. With a 25.5-inch width and 22.8-inch height, it follows the OE-style packaging needed for proper clearance and mounting.
This part number is a direct-fit cooling solution for 2017-2019 Cadillac XT5, 2019 Chevrolet Blazer, and 2017-2019 GMC Acadia applications listed without RPO Code V92 trailer provisions. If you are searching for a Dorman 620-946 engine cooling fan assembly for Cadillac XT5, Chevrolet Blazer, or GMC Acadia cooling repair, this unit is built for those exact vehicle-year combinations.
What It Helps Address
- Overheating caused by a weak or inoperative radiator fan
- Reduced airflow through the radiator at idle or low speed
- Cooling fan noise from a worn motor or damaged assembly
- Fan operation issues tied to a failed OE-style cooling module
- Replacement needs after physical damage to the shroud or blades
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and the absence of RPO Code V92 trailer provisions before installation. Confirm the connector style, mounting layout, and available clearance against the original assembly. Because this is a direct replacement cooling fan assembly, transfer of unrelated hardware is not assumed and should be checked against the vehicle’s original configuration.
Quality Assurance
Dorman states that this engine cooling fan assembly is rigorously tested to confirm cooling performance comparable to the original part. The design is intended to deliver OE-style fit and function for the listed Cadillac XT5, Chevrolet Blazer, and GMC Acadia applications. Part number 620-946 is built as a standard replacement for service technicians and DIY repairs needing a dependable radiator fan assembly.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Cooling Fan Assembly for GM Applications
Dorman 620-946 is an engine cooling fan assembly built as a standard replacement for the stock radiator fan on select Cadillac, Chevrolet, and GMC vehicles. It is precision-engineered for fit and performance, with a brushless 12-volt motor, plastic housing, and integrated shroud to match the original cooling setup.
Compatible With 2017-2019 Cadillac XT5, 2019 Chevrolet Blazer, and 2017-2019 GMC Acadia without RPO Code V92 trailer provisions. This Dorman 620-946 cooling fan assembly is designed for direct replacement service where the original fan assembly has failed or no longer moves enough air through the radiator.
Key Features
- Engine cooling fan assembly with motor included
- 12-volt brushless motor for OE-style cooling operation
- Plastic fan housing and black shroud for a factory-style layout
- Single-fan design with integrated shroud
- Male blade-style connector with 1 connector and 1 terminal
- Standard replacement grade for direct-fit service
- Cross-references Four Seasons 75192 for the same application
Detailed Description
Dorman 620-946 is engineered to match the fit and cooling performance of the original radiator fan assembly on specific GM platforms. The assembly uses a black plastic shroud, black blade, and brushless motor design to support consistent airflow across the radiator and help maintain normal operating temperatures. With a 25.5-inch width and 22.8-inch height, it follows the OE-style packaging needed for proper clearance and mounting.
This part number is a direct-fit cooling solution for 2017-2019 Cadillac XT5, 2019 Chevrolet Blazer, and 2017-2019 GMC Acadia applications listed without RPO Code V92 trailer provisions. If you are searching for a Dorman 620-946 engine cooling fan assembly for Cadillac XT5, Chevrolet Blazer, or GMC Acadia cooling repair, this unit is built for those exact vehicle-year combinations.
What It Helps Address
- Overheating caused by a weak or inoperative radiator fan
- Reduced airflow through the radiator at idle or low speed
- Cooling fan noise from a worn motor or damaged assembly
- Fan operation issues tied to a failed OE-style cooling module
- Replacement needs after physical damage to the shroud or blades
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and the absence of RPO Code V92 trailer provisions before installation. Confirm the connector style, mounting layout, and available clearance against the original assembly. Because this is a direct replacement cooling fan assembly, transfer of unrelated hardware is not assumed and should be checked against the vehicle’s original configuration.
Quality Assurance
Dorman states that this engine cooling fan assembly is rigorously tested to confirm cooling performance comparable to the original part. The design is intended to deliver OE-style fit and function for the listed Cadillac XT5, Chevrolet Blazer, and GMC Acadia applications. Part number 620-946 is built as a standard replacement for service technicians and DIY repairs needing a dependable radiator fan assembly.
