Dorman 626-739 HVAC Heater Hose Assembly - Outlet
HVAC Heater Hose Assembly for Ford, Mercury, and Lincoln
Dorman 626-739 is an HVAC heater hose assembly built for select Ford, Mercury, and Lincoln applications with outlet-to-junction routing. It replaces the original hose assembly with an upgraded aluminum T-connector to address a common failure point found in OE plastic designs.
Compatible with 2006-2009 Ford Fusion, outlet; 2006-2009 Mercury Milan, outlet; and 2006 Lincoln Zephyr, outlet. This Dorman 626-739 heater hose assembly follows the molded OE-style layout for direct routing in the engine bay.
Key Features
- Upgraded aluminum T-connector helps reduce repeat failures associated with cracked plastic connectors
- Molded hose assembly with a 180-degree maximum bend angle
- Black and gray construction with rubber, metal, and plastic materials
- Includes clamps
- Protective sleeve attached for added hose protection
- Standard replacement grade for OE-style service
- Single I.D. coolant hose design with quick disconnect connection on the applicable end
Detailed Description
This HVAC heater hose assembly is engineered for the heater circuit routing used on the Ford Fusion, Mercury Milan, and Lincoln Zephyr listed above. Dorman 626-739 uses a molded assembly layout with a centerline length of 26 inches and branch routing that matches the original engine-to-junction path. The aluminum T-connector is the key OE FIX update, replacing the plastic connector commonly found on the original assembly to improve durability at a known failure point. This part cross-references Dayco 72699 for the same application.
Common Problems This Part Can Address
- Coolant leaks at a cracked heater hose T-connector
- Loss of heater performance from damaged hose routing
- Coolant seepage at quick disconnect connection points
- Repeated replacement caused by brittle OE plastic connector failure
- Fitment issues when the original molded hose assembly is no longer serviceable
Installation Notes and Tips
Verify the outlet position and engine-to-junction routing before installation. Inspect mating connections, seals, and adjacent hoses for wear, and confirm the quick disconnect end is fully seated during assembly. Because this is a molded heater hose assembly, route it to match the factory path and avoid twisting or sharp bends that can stress the hose or connector.
Quality Assurance
Dorman OE FIX parts are built to address known weaknesses in original equipment designs while maintaining OE-style fit and function for the listed vehicles. Dorman 626-739 is intended for direct replacement service on the specified Ford, Mercury, and Lincoln applications.
Original: $49.05
-65%$49.05
$17.17Dorman 626-739 HVAC Heater Hose Assembly - Outlet
HVAC Heater Hose Assembly for Ford, Mercury, and Lincoln
Dorman 626-739 is an HVAC heater hose assembly built for select Ford, Mercury, and Lincoln applications with outlet-to-junction routing. It replaces the original hose assembly with an upgraded aluminum T-connector to address a common failure point found in OE plastic designs.
Compatible with 2006-2009 Ford Fusion, outlet; 2006-2009 Mercury Milan, outlet; and 2006 Lincoln Zephyr, outlet. This Dorman 626-739 heater hose assembly follows the molded OE-style layout for direct routing in the engine bay.
Key Features
- Upgraded aluminum T-connector helps reduce repeat failures associated with cracked plastic connectors
- Molded hose assembly with a 180-degree maximum bend angle
- Black and gray construction with rubber, metal, and plastic materials
- Includes clamps
- Protective sleeve attached for added hose protection
- Standard replacement grade for OE-style service
- Single I.D. coolant hose design with quick disconnect connection on the applicable end
Detailed Description
This HVAC heater hose assembly is engineered for the heater circuit routing used on the Ford Fusion, Mercury Milan, and Lincoln Zephyr listed above. Dorman 626-739 uses a molded assembly layout with a centerline length of 26 inches and branch routing that matches the original engine-to-junction path. The aluminum T-connector is the key OE FIX update, replacing the plastic connector commonly found on the original assembly to improve durability at a known failure point. This part cross-references Dayco 72699 for the same application.
Common Problems This Part Can Address
- Coolant leaks at a cracked heater hose T-connector
- Loss of heater performance from damaged hose routing
- Coolant seepage at quick disconnect connection points
- Repeated replacement caused by brittle OE plastic connector failure
- Fitment issues when the original molded hose assembly is no longer serviceable
Installation Notes and Tips
Verify the outlet position and engine-to-junction routing before installation. Inspect mating connections, seals, and adjacent hoses for wear, and confirm the quick disconnect end is fully seated during assembly. Because this is a molded heater hose assembly, route it to match the factory path and avoid twisting or sharp bends that can stress the hose or connector.
Quality Assurance
Dorman OE FIX parts are built to address known weaknesses in original equipment designs while maintaining OE-style fit and function for the listed vehicles. Dorman 626-739 is intended for direct replacement service on the specified Ford, Mercury, and Lincoln applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
HVAC Heater Hose Assembly for Ford, Mercury, and Lincoln
Dorman 626-739 is an HVAC heater hose assembly built for select Ford, Mercury, and Lincoln applications with outlet-to-junction routing. It replaces the original hose assembly with an upgraded aluminum T-connector to address a common failure point found in OE plastic designs.
Compatible with 2006-2009 Ford Fusion, outlet; 2006-2009 Mercury Milan, outlet; and 2006 Lincoln Zephyr, outlet. This Dorman 626-739 heater hose assembly follows the molded OE-style layout for direct routing in the engine bay.
Key Features
- Upgraded aluminum T-connector helps reduce repeat failures associated with cracked plastic connectors
- Molded hose assembly with a 180-degree maximum bend angle
- Black and gray construction with rubber, metal, and plastic materials
- Includes clamps
- Protective sleeve attached for added hose protection
- Standard replacement grade for OE-style service
- Single I.D. coolant hose design with quick disconnect connection on the applicable end
Detailed Description
This HVAC heater hose assembly is engineered for the heater circuit routing used on the Ford Fusion, Mercury Milan, and Lincoln Zephyr listed above. Dorman 626-739 uses a molded assembly layout with a centerline length of 26 inches and branch routing that matches the original engine-to-junction path. The aluminum T-connector is the key OE FIX update, replacing the plastic connector commonly found on the original assembly to improve durability at a known failure point. This part cross-references Dayco 72699 for the same application.
Common Problems This Part Can Address
- Coolant leaks at a cracked heater hose T-connector
- Loss of heater performance from damaged hose routing
- Coolant seepage at quick disconnect connection points
- Repeated replacement caused by brittle OE plastic connector failure
- Fitment issues when the original molded hose assembly is no longer serviceable
Installation Notes and Tips
Verify the outlet position and engine-to-junction routing before installation. Inspect mating connections, seals, and adjacent hoses for wear, and confirm the quick disconnect end is fully seated during assembly. Because this is a molded heater hose assembly, route it to match the factory path and avoid twisting or sharp bends that can stress the hose or connector.
Quality Assurance
Dorman OE FIX parts are built to address known weaknesses in original equipment designs while maintaining OE-style fit and function for the listed vehicles. Dorman 626-739 is intended for direct replacement service on the specified Ford, Mercury, and Lincoln applications.
