Dorman 673-071 Catalytic Converter with Integrated Exhaust Manifold - Front
OE-Style Manifold Catalytic Converter
Dorman 673-071 is a catalytic converter with integrated exhaust manifold built for specific Hyundai and Kia front applications. It is engineered to match the original equipment layout for a direct replacement on select 2013-2016 vehicles, including Hyundai Santa Fe Sport and Kia Sorento.
Key Features
- Integrated exhaust manifold and catalytic converter in a one-piece design
- Flanged inlet and outlet for OE-style exhaust connection points
- Ceramic substrate material
- Stainless steel converter body material with natural finish
- CARB certified and CARB compliant, with Executive Order D-798-9
- New York certified for regulated applications
- Includes outlet gasket, studs, and nuts as listed in the package contents
- Sensor port count: 2; air tube count: 2
Detailed Description
This Dorman manifold converter is built as a direct-fit replacement for vehicles that use an integrated exhaust manifold and catalytic converter assembly. The flanged inlet and outlet, round port shapes, and OE-style one-piece construction support a factory-like exhaust connection on the front position. For buyers searching for a 2016 Hyundai Santa Fe Sport catalytic converter with exhaust manifold or a 2014 Kia Sorento front manifold converter, Dorman 673-071 matches the listed applications and emissions requirements.
Fitment includes 2016 Hyundai Santa Fe Sport, front; 2013-2015 Hyundai Santa Fe Sport, front; and 2014-2015 Kia Sorento, front. This part cross-references 285102G445 for the same application. The 30-inch overall length, 4-inch converter body length, and 0.125 tube wall thickness reflect a heavy-duty OE-style construction intended to replace the original manifold converter assembly without changing the exhaust layout.
What It Helps Address
- Failed catalytic converter efficiency codes
- Cracked or leaking exhaust manifold converter assemblies
- Emissions test failures on CARB-regulated vehicles
- Exhaust leaks at the manifold or outlet flange
- Check engine lights related to catalyst performance or sensor readings
Installation Notes and Tips
Verify the vehicle’s year, make, model, and front-position fitment before ordering. Confirm CARB compliance requirements for your state or inspection area, especially for California and New York applications. Inspect the mating flanges, oxygen sensor ports, and exhaust sealing surfaces before installation, and replace worn gaskets or damaged hardware as needed based on the vehicle condition.
Quality Assurance
Dorman designs this manifold converter to match original equipment on specific vehicle applications, with CARB certification and New York certification documented for regulated use. The OE-style construction and application-specific fitment support a direct replacement for select Hyundai Santa Fe Sport and Kia Sorento models. Part number 673-071 is built to the listed emissions and fitment specifications.
Original: $1,222.15
-65%$1,222.15
$427.75Dorman 673-071 Catalytic Converter with Integrated Exhaust Manifold - Front
OE-Style Manifold Catalytic Converter
Dorman 673-071 is a catalytic converter with integrated exhaust manifold built for specific Hyundai and Kia front applications. It is engineered to match the original equipment layout for a direct replacement on select 2013-2016 vehicles, including Hyundai Santa Fe Sport and Kia Sorento.
Key Features
- Integrated exhaust manifold and catalytic converter in a one-piece design
- Flanged inlet and outlet for OE-style exhaust connection points
- Ceramic substrate material
- Stainless steel converter body material with natural finish
- CARB certified and CARB compliant, with Executive Order D-798-9
- New York certified for regulated applications
- Includes outlet gasket, studs, and nuts as listed in the package contents
- Sensor port count: 2; air tube count: 2
Detailed Description
This Dorman manifold converter is built as a direct-fit replacement for vehicles that use an integrated exhaust manifold and catalytic converter assembly. The flanged inlet and outlet, round port shapes, and OE-style one-piece construction support a factory-like exhaust connection on the front position. For buyers searching for a 2016 Hyundai Santa Fe Sport catalytic converter with exhaust manifold or a 2014 Kia Sorento front manifold converter, Dorman 673-071 matches the listed applications and emissions requirements.
Fitment includes 2016 Hyundai Santa Fe Sport, front; 2013-2015 Hyundai Santa Fe Sport, front; and 2014-2015 Kia Sorento, front. This part cross-references 285102G445 for the same application. The 30-inch overall length, 4-inch converter body length, and 0.125 tube wall thickness reflect a heavy-duty OE-style construction intended to replace the original manifold converter assembly without changing the exhaust layout.
What It Helps Address
- Failed catalytic converter efficiency codes
- Cracked or leaking exhaust manifold converter assemblies
- Emissions test failures on CARB-regulated vehicles
- Exhaust leaks at the manifold or outlet flange
- Check engine lights related to catalyst performance or sensor readings
Installation Notes and Tips
Verify the vehicle’s year, make, model, and front-position fitment before ordering. Confirm CARB compliance requirements for your state or inspection area, especially for California and New York applications. Inspect the mating flanges, oxygen sensor ports, and exhaust sealing surfaces before installation, and replace worn gaskets or damaged hardware as needed based on the vehicle condition.
Quality Assurance
Dorman designs this manifold converter to match original equipment on specific vehicle applications, with CARB certification and New York certification documented for regulated use. The OE-style construction and application-specific fitment support a direct replacement for select Hyundai Santa Fe Sport and Kia Sorento models. Part number 673-071 is built to the listed emissions and fitment specifications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Manifold Catalytic Converter
Dorman 673-071 is a catalytic converter with integrated exhaust manifold built for specific Hyundai and Kia front applications. It is engineered to match the original equipment layout for a direct replacement on select 2013-2016 vehicles, including Hyundai Santa Fe Sport and Kia Sorento.
Key Features
- Integrated exhaust manifold and catalytic converter in a one-piece design
- Flanged inlet and outlet for OE-style exhaust connection points
- Ceramic substrate material
- Stainless steel converter body material with natural finish
- CARB certified and CARB compliant, with Executive Order D-798-9
- New York certified for regulated applications
- Includes outlet gasket, studs, and nuts as listed in the package contents
- Sensor port count: 2; air tube count: 2
Detailed Description
This Dorman manifold converter is built as a direct-fit replacement for vehicles that use an integrated exhaust manifold and catalytic converter assembly. The flanged inlet and outlet, round port shapes, and OE-style one-piece construction support a factory-like exhaust connection on the front position. For buyers searching for a 2016 Hyundai Santa Fe Sport catalytic converter with exhaust manifold or a 2014 Kia Sorento front manifold converter, Dorman 673-071 matches the listed applications and emissions requirements.
Fitment includes 2016 Hyundai Santa Fe Sport, front; 2013-2015 Hyundai Santa Fe Sport, front; and 2014-2015 Kia Sorento, front. This part cross-references 285102G445 for the same application. The 30-inch overall length, 4-inch converter body length, and 0.125 tube wall thickness reflect a heavy-duty OE-style construction intended to replace the original manifold converter assembly without changing the exhaust layout.
What It Helps Address
- Failed catalytic converter efficiency codes
- Cracked or leaking exhaust manifold converter assemblies
- Emissions test failures on CARB-regulated vehicles
- Exhaust leaks at the manifold or outlet flange
- Check engine lights related to catalyst performance or sensor readings
Installation Notes and Tips
Verify the vehicle’s year, make, model, and front-position fitment before ordering. Confirm CARB compliance requirements for your state or inspection area, especially for California and New York applications. Inspect the mating flanges, oxygen sensor ports, and exhaust sealing surfaces before installation, and replace worn gaskets or damaged hardware as needed based on the vehicle condition.
Quality Assurance
Dorman designs this manifold converter to match original equipment on specific vehicle applications, with CARB certification and New York certification documented for regulated use. The OE-style construction and application-specific fitment support a direct replacement for select Hyundai Santa Fe Sport and Kia Sorento models. Part number 673-071 is built to the listed emissions and fitment specifications.
