Dorman 674-7027 Exhaust Clamp - Flex Pipe (Inlet) or Flex Pipe (Outlet)
Dorman 674-7027 Exhaust Clamp Overview
Dorman 674-7027 is a direct replacement exhaust clamp built to match the fit and function of the original equipment clamp. It uses stainless steel construction and a T-bolt V-band clamp design for secure exhaust sealing in service applications.
For technicians and DIY repairs on vehicles such as Honda Civic and Ford F-150 exhaust systems, this clamp is a practical OE-style replacement when the original clamp is damaged, corroded, or no longer holding properly. Part number 674-7027 is also referenced by cross numbers 82509 and 21021852 for the same application.
Key Features
- Direct replacement exhaust clamp for OE-style fit and function
- Stainless steel material with a natural finish
- T-bolt V-band clamp design for a secure exhaust connection
- Lock nut hardware style with regular grade thread specification
- Maximum diameter of 4.36 in for the specified exhaust connection range
- Designed for long service life and tested to industry standards
Detailed Product Description
This exhaust clamp is engineered for exhaust hardware repairs where a dependable sealing connection is needed between exhaust components. The stainless steel body helps resist corrosion in demanding underbody conditions, while the T-bolt V-band clamp design supports even clamping force around the joint. Dorman 674-7027 is intended as a direct replacement for the original clamp, making it a straightforward choice for exhaust service on applications that call for this style and size. If you are sourcing a replacement clamp for a Honda Civic or Ford F-150 exhaust repair, 674-7027 provides an OE-style solution with the correct clamp geometry and material selection.
Common Repair Uses
- Replacing a rusted or broken exhaust clamp
- Restoring a leaking exhaust joint
- Securing exhaust tubing after component service
- Correcting loose connections caused by clamp wear
- Addressing exhaust noise from an improperly sealed joint
Installation Notes and Tips
Verify the exhaust connection diameter before installation and confirm the clamp style matches the original hardware. Clean the mating surfaces before tightening to help the clamp seat evenly. Use the specified thread size and lock nut design to achieve proper clamping force without over-tightening. For vehicle-specific service, confirm the application details for your Honda Civic, Ford F-150, or other listed exhaust repair before installation.
Quality Assurance
Dorman manufactures this clamp as a direct replacement part and states that it has undergone industry standard testing for reliable performance. The stainless steel construction is selected for durability in exhaust service environments.
Original: $26.43
-65%$26.43
$9.25Dorman 674-7027 Exhaust Clamp - Flex Pipe (Inlet) or Flex Pipe (Outlet)
Dorman 674-7027 Exhaust Clamp Overview
Dorman 674-7027 is a direct replacement exhaust clamp built to match the fit and function of the original equipment clamp. It uses stainless steel construction and a T-bolt V-band clamp design for secure exhaust sealing in service applications.
For technicians and DIY repairs on vehicles such as Honda Civic and Ford F-150 exhaust systems, this clamp is a practical OE-style replacement when the original clamp is damaged, corroded, or no longer holding properly. Part number 674-7027 is also referenced by cross numbers 82509 and 21021852 for the same application.
Key Features
- Direct replacement exhaust clamp for OE-style fit and function
- Stainless steel material with a natural finish
- T-bolt V-band clamp design for a secure exhaust connection
- Lock nut hardware style with regular grade thread specification
- Maximum diameter of 4.36 in for the specified exhaust connection range
- Designed for long service life and tested to industry standards
Detailed Product Description
This exhaust clamp is engineered for exhaust hardware repairs where a dependable sealing connection is needed between exhaust components. The stainless steel body helps resist corrosion in demanding underbody conditions, while the T-bolt V-band clamp design supports even clamping force around the joint. Dorman 674-7027 is intended as a direct replacement for the original clamp, making it a straightforward choice for exhaust service on applications that call for this style and size. If you are sourcing a replacement clamp for a Honda Civic or Ford F-150 exhaust repair, 674-7027 provides an OE-style solution with the correct clamp geometry and material selection.
Common Repair Uses
- Replacing a rusted or broken exhaust clamp
- Restoring a leaking exhaust joint
- Securing exhaust tubing after component service
- Correcting loose connections caused by clamp wear
- Addressing exhaust noise from an improperly sealed joint
Installation Notes and Tips
Verify the exhaust connection diameter before installation and confirm the clamp style matches the original hardware. Clean the mating surfaces before tightening to help the clamp seat evenly. Use the specified thread size and lock nut design to achieve proper clamping force without over-tightening. For vehicle-specific service, confirm the application details for your Honda Civic, Ford F-150, or other listed exhaust repair before installation.
Quality Assurance
Dorman manufactures this clamp as a direct replacement part and states that it has undergone industry standard testing for reliable performance. The stainless steel construction is selected for durability in exhaust service environments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 674-7027 Exhaust Clamp Overview
Dorman 674-7027 is a direct replacement exhaust clamp built to match the fit and function of the original equipment clamp. It uses stainless steel construction and a T-bolt V-band clamp design for secure exhaust sealing in service applications.
For technicians and DIY repairs on vehicles such as Honda Civic and Ford F-150 exhaust systems, this clamp is a practical OE-style replacement when the original clamp is damaged, corroded, or no longer holding properly. Part number 674-7027 is also referenced by cross numbers 82509 and 21021852 for the same application.
Key Features
- Direct replacement exhaust clamp for OE-style fit and function
- Stainless steel material with a natural finish
- T-bolt V-band clamp design for a secure exhaust connection
- Lock nut hardware style with regular grade thread specification
- Maximum diameter of 4.36 in for the specified exhaust connection range
- Designed for long service life and tested to industry standards
Detailed Product Description
This exhaust clamp is engineered for exhaust hardware repairs where a dependable sealing connection is needed between exhaust components. The stainless steel body helps resist corrosion in demanding underbody conditions, while the T-bolt V-band clamp design supports even clamping force around the joint. Dorman 674-7027 is intended as a direct replacement for the original clamp, making it a straightforward choice for exhaust service on applications that call for this style and size. If you are sourcing a replacement clamp for a Honda Civic or Ford F-150 exhaust repair, 674-7027 provides an OE-style solution with the correct clamp geometry and material selection.
Common Repair Uses
- Replacing a rusted or broken exhaust clamp
- Restoring a leaking exhaust joint
- Securing exhaust tubing after component service
- Correcting loose connections caused by clamp wear
- Addressing exhaust noise from an improperly sealed joint
Installation Notes and Tips
Verify the exhaust connection diameter before installation and confirm the clamp style matches the original hardware. Clean the mating surfaces before tightening to help the clamp seat evenly. Use the specified thread size and lock nut design to achieve proper clamping force without over-tightening. For vehicle-specific service, confirm the application details for your Honda Civic, Ford F-150, or other listed exhaust repair before installation.
Quality Assurance
Dorman manufactures this clamp as a direct replacement part and states that it has undergone industry standard testing for reliable performance. The stainless steel construction is selected for durability in exhaust service environments.
