Dorman 697-541 Differential Pinion Flange - Rear
Differential Pinion Flange for Chrysler 9.25 Axles
Dorman 697-541 is a direct replacement differential pinion flange for vehicles equipped with the 9.25 in. Chrysler rear axle. It matches the original equipment part for a straightforward repair when the factory flange is worn, damaged, or causing driveline vibration.
Built from carbon steel with a 4.81 in. outside diameter and 0.533 in. thickness, this pinion flange is made for rear axle service on Dodge Ram 1500, Dodge Dakota, and other Chrysler 9.25 axle applications. The 29-spline design and OE-style dimensions support proper driveline alignment and secure pinion yoke engagement.
Key Features
- Direct replacement differential pinion flange for OE-style repair
- Carbon steel construction for rear axle durability
- 4.81 in. flange outside diameter and 4.81 in. flange length
- 29-spline inside design with 1.26 in. spline inside diameter
- 8-bolt cover pattern and 0.558 in. mounting hole diameter
- Compatible with 9.25 in. Chrysler rear axle applications
- Cross-references YYC52105064 for the same application
Detailed Description
Dorman 697-541 is engineered for Chrysler 9.25 rear axle service where the original pinion flange has worn splines, damaged mounting surfaces, or imbalance-related issues. It is a practical replacement for Dodge Ram 1500, Dodge Dakota, Dodge Durango, Chrysler Aspen, and Mitsubishi Raider applications listed with the 9.25 in. Chrysler rear axle. This part number, 697-541, is also a fit for many older Dodge truck and van platforms that use the same rear axle configuration.
Because the flange dimensions, spline count, and material match the OE layout, this replacement helps restore proper driveline connection at the differential pinion. For shoppers searching for a Dodge Ram 1500 rear differential pinion flange, Dodge Dakota 9.25 Chrysler rear axle flange, or Dorman 697-541 pinion flange replacement, this part provides a direct-match service solution.
What It Helps Fix
- Driveline vibration caused by a worn or damaged pinion flange
- Loose or inconsistent pinion yoke engagement
- Noise from damaged flange splines or mounting surfaces
- Rear axle service issues on 9.25 in. Chrysler differential setups
- Replacement needs after flange wear on Dodge Ram 1500 and Dodge Dakota rear axles
Installation Notes and Tips
Verify axle type, spline count, and flange dimensions before installation. This part is for rear-position applications only and is listed for 9.25 in. Chrysler rear axle setups with 31-spline vehicle fitment notes where specified. Inspect the pinion seal, yoke, and related driveline components during service so the new flange installs onto clean, undamaged mating surfaces. Confirm torque specifications and driveline alignment using the vehicle service manual.
Quality Assurance
Dorman manufactures this pinion flange as a direct replacement part built to match original equipment specifications for the listed applications. The design focuses on correct fit, material selection, and dependable rear axle service for Chrysler 9.25 differential repairs.
Original: $270.95
-65%$270.95
$94.83Dorman 697-541 Differential Pinion Flange - Rear
Differential Pinion Flange for Chrysler 9.25 Axles
Dorman 697-541 is a direct replacement differential pinion flange for vehicles equipped with the 9.25 in. Chrysler rear axle. It matches the original equipment part for a straightforward repair when the factory flange is worn, damaged, or causing driveline vibration.
Built from carbon steel with a 4.81 in. outside diameter and 0.533 in. thickness, this pinion flange is made for rear axle service on Dodge Ram 1500, Dodge Dakota, and other Chrysler 9.25 axle applications. The 29-spline design and OE-style dimensions support proper driveline alignment and secure pinion yoke engagement.
Key Features
- Direct replacement differential pinion flange for OE-style repair
- Carbon steel construction for rear axle durability
- 4.81 in. flange outside diameter and 4.81 in. flange length
- 29-spline inside design with 1.26 in. spline inside diameter
- 8-bolt cover pattern and 0.558 in. mounting hole diameter
- Compatible with 9.25 in. Chrysler rear axle applications
- Cross-references YYC52105064 for the same application
Detailed Description
Dorman 697-541 is engineered for Chrysler 9.25 rear axle service where the original pinion flange has worn splines, damaged mounting surfaces, or imbalance-related issues. It is a practical replacement for Dodge Ram 1500, Dodge Dakota, Dodge Durango, Chrysler Aspen, and Mitsubishi Raider applications listed with the 9.25 in. Chrysler rear axle. This part number, 697-541, is also a fit for many older Dodge truck and van platforms that use the same rear axle configuration.
Because the flange dimensions, spline count, and material match the OE layout, this replacement helps restore proper driveline connection at the differential pinion. For shoppers searching for a Dodge Ram 1500 rear differential pinion flange, Dodge Dakota 9.25 Chrysler rear axle flange, or Dorman 697-541 pinion flange replacement, this part provides a direct-match service solution.
What It Helps Fix
- Driveline vibration caused by a worn or damaged pinion flange
- Loose or inconsistent pinion yoke engagement
- Noise from damaged flange splines or mounting surfaces
- Rear axle service issues on 9.25 in. Chrysler differential setups
- Replacement needs after flange wear on Dodge Ram 1500 and Dodge Dakota rear axles
Installation Notes and Tips
Verify axle type, spline count, and flange dimensions before installation. This part is for rear-position applications only and is listed for 9.25 in. Chrysler rear axle setups with 31-spline vehicle fitment notes where specified. Inspect the pinion seal, yoke, and related driveline components during service so the new flange installs onto clean, undamaged mating surfaces. Confirm torque specifications and driveline alignment using the vehicle service manual.
Quality Assurance
Dorman manufactures this pinion flange as a direct replacement part built to match original equipment specifications for the listed applications. The design focuses on correct fit, material selection, and dependable rear axle service for Chrysler 9.25 differential repairs.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Differential Pinion Flange for Chrysler 9.25 Axles
Dorman 697-541 is a direct replacement differential pinion flange for vehicles equipped with the 9.25 in. Chrysler rear axle. It matches the original equipment part for a straightforward repair when the factory flange is worn, damaged, or causing driveline vibration.
Built from carbon steel with a 4.81 in. outside diameter and 0.533 in. thickness, this pinion flange is made for rear axle service on Dodge Ram 1500, Dodge Dakota, and other Chrysler 9.25 axle applications. The 29-spline design and OE-style dimensions support proper driveline alignment and secure pinion yoke engagement.
Key Features
- Direct replacement differential pinion flange for OE-style repair
- Carbon steel construction for rear axle durability
- 4.81 in. flange outside diameter and 4.81 in. flange length
- 29-spline inside design with 1.26 in. spline inside diameter
- 8-bolt cover pattern and 0.558 in. mounting hole diameter
- Compatible with 9.25 in. Chrysler rear axle applications
- Cross-references YYC52105064 for the same application
Detailed Description
Dorman 697-541 is engineered for Chrysler 9.25 rear axle service where the original pinion flange has worn splines, damaged mounting surfaces, or imbalance-related issues. It is a practical replacement for Dodge Ram 1500, Dodge Dakota, Dodge Durango, Chrysler Aspen, and Mitsubishi Raider applications listed with the 9.25 in. Chrysler rear axle. This part number, 697-541, is also a fit for many older Dodge truck and van platforms that use the same rear axle configuration.
Because the flange dimensions, spline count, and material match the OE layout, this replacement helps restore proper driveline connection at the differential pinion. For shoppers searching for a Dodge Ram 1500 rear differential pinion flange, Dodge Dakota 9.25 Chrysler rear axle flange, or Dorman 697-541 pinion flange replacement, this part provides a direct-match service solution.
What It Helps Fix
- Driveline vibration caused by a worn or damaged pinion flange
- Loose or inconsistent pinion yoke engagement
- Noise from damaged flange splines or mounting surfaces
- Rear axle service issues on 9.25 in. Chrysler differential setups
- Replacement needs after flange wear on Dodge Ram 1500 and Dodge Dakota rear axles
Installation Notes and Tips
Verify axle type, spline count, and flange dimensions before installation. This part is for rear-position applications only and is listed for 9.25 in. Chrysler rear axle setups with 31-spline vehicle fitment notes where specified. Inspect the pinion seal, yoke, and related driveline components during service so the new flange installs onto clean, undamaged mating surfaces. Confirm torque specifications and driveline alignment using the vehicle service manual.
Quality Assurance
Dorman manufactures this pinion flange as a direct replacement part built to match original equipment specifications for the listed applications. The design focuses on correct fit, material selection, and dependable rear axle service for Chrysler 9.25 differential repairs.
